Equivalent & Substitute Parts for XPEBWT-H1-0000-00FE5

Part Overview

The XPEBWT-H1-0000-00FE5 is a CreeLED XLamp® XP-E2 neutral white LED with a correlated color temperature of 4000K, designed for surface mount applications in the 1414 (3535 Metric) package. This part is currently Active in production status with 989 units in stock. Substitute parts are identified based on matching electrical characteristics, optical performance, thermal properties, and mechanical compatibility within the XLamp product family.

Substiute Parts

XPEBWT-H1-0000-00FE5

CreeLED, Inc.In Stock: 1094XPEBWT-H1-0000-00FE5 Datasheet

Current PartRFQ

XPGBWT-H1-0000-00FZ5

CreeLED, Inc.In Stock: 1797XPGBWT-H1-0000-00FZ5 Datasheet

Parametric EquivalentRFQ

XTEAWT-00-0000-00000HFE5

CreeLED, Inc.In Stock: 958XTEAWT-00-0000-00000HFE5 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XPEBWT-H1-0000-00FE5 are qualified based on the following criteria:

Electrical Compatibility: All substitute parts operate at the same test current (350mA), maximum current (1.5A), and produce identical luminous flux at 85°C (126lm). Forward voltage variations remain within acceptable operating ranges for typical LED driver circuits.

Optical Performance: All parts maintain neutral white color (4000K CCT) and CRI of 80, ensuring consistent color rendering in end-use applications.

Mechanical Compatibility: All substitute parts use the same 1414 (3535 Metric) surface mount package with identical footprint dimensions (0.136" L x 0.136" W / 3.45mm x 3.45mm), enabling direct board-level substitution.

Thermal Properties: Thermal resistance values range from 4°C/W to 5.8°C/W, all within acceptable limits for thermal management in typical LED applications.

Product Status: All substitute parts maintain Active production status.

Parameter Comparison

Engineering Selection Recommendations

XPGBWT-H1-0000-00FZ5 (XLamp® XP-G2): This substitute offers improved thermal performance with a thermal resistance of 4.0°C/W compared to 5.8°C/W in the main part, and higher luminous efficacy at 133 lm/W. Forward voltage is 2.72V, which is 0.12V lower than the main part. Viewing angle is 115° versus 110°. Both parts are Active status and RoHS Compliant. This part is suitable for applications requiring enhanced thermal management or higher efficiency.

XTEAWT-00-0000-00000HFE5 (XLamp® XT-E): This substitute maintains forward voltage at 2.85V, closely matching the main part at 2.84V. Thermal resistance is 5.0°C/W, intermediate between the main part and the XP-G2 option. Viewing angle is 115°. Height when seated is 0.100" (2.54mm), which is 0.006" taller than the main part. Both parts are Active status and RoHS Compliant. This part is suitable for applications with minimal thermal constraints and standard optical requirements.

All substitute parts maintain identical electrical performance at the 350mA test current, identical luminous flux output, and identical color characteristics. Selection should be based on thermal management requirements, available board height clearance, and efficiency targets specific to the end application.

Frequently Asked Questions (FAQ)

Q: Can XPGBWT-H1-0000-00FZ5 be used as a direct replacement for XPEBWT-H1-0000-00FE5?

A: Yes. Both parts share identical footprint dimensions (0.136" L x 0.136" W / 3.45mm x 3.45mm), identical package type (1414 / 3535 Metric), identical test current (350mA), identical maximum current (1.5A), and identical luminous flux output (126lm @ 85°C). Forward voltage differs by 0.12V (2.72V vs 2.84V), which is within the operating range of standard LED driver circuits. Seated height is identical at 0.094" (2.39mm).

Q: What is the difference in thermal performance between these parts?

A: The XPGBWT-H1-0000-00FZ5 has the lowest thermal resistance at 4.0°C/W, followed by XTEAWT-00-0000-00000HFE5 at 5.0°C/W, and XPEBWT-H1-0000-00FE5 at 5.8°C/W. Lower thermal resistance indicates better heat dissipation from the LED junction to the PCB. Selection depends on thermal management requirements and ambient operating conditions.

Q: Are there height clearance differences between these parts?

A: The XPEBWT-H1-0000-00FE5 and XPGBWT-H1-0000-00FZ5 both have a maximum seated height of 0.094" (2.39mm). The XTEAWT-00-0000-00000HFE5 has a maximum seated height of 0.100" (2.54mm), which is 0.006" taller. Applications with tight height constraints should account for this difference.

Q: Do all substitute parts have the same color rendering characteristics?

A: Yes. All three parts are neutral white LEDs with a CCT of 4000K and a CRI of 80, ensuring identical color rendering performance in end-use applications.

Q: What is the efficiency difference between these parts?

A: At 350mA test current, the XPGBWT-H1-0000-00FZ5 delivers 133 lm/W, the XTEAWT-00-0000-00000HFE5 delivers 126 lm/W, and the XPEBWT-H1-0000-00FE5 delivers 127 lm/W. The XP-G2 variant offers approximately 5% higher luminous efficacy.

Q: Are all substitute parts RoHS and REACH compliant?

A: The XPGBWT-H1-0000-00FZ5 and XTEAWT-00-0000-00000HFE5 are both RoHS Compliant and REACH Unaffected. Compliance information for the main part XPEBWT-H1-0000-00FE5 was not provided in the input parameters.

Q: What is the viewing angle difference?

A: The XPEBWT-H1-0000-00FE5 has a viewing angle of 110°. Both substitute parts, XPGBWT-H1-0000-00FZ5 and XTEAWT-00-0000-00000HFE5, have a viewing angle of 115°, providing a 5° wider light distribution.