XPEBWT-H1-0000-00DF6 Equivalent & Substitute Parts

Part Overview

The XPEBWT-H1-0000-00DF6 is a CreeLED XLamp® XP-E2 warm white LED with a correlated color temperature of 3750K, designed for surface mount applications in the 1414 (3535 Metric) package. This component is classified as Active product status and is RoHS Compliant and REACH Unaffected. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained across the specified parameter set.

Substiute Parts

XPEBWT-H1-0000-00DF6

CreeLED, Inc.In Stock: 759XPEBWT-H1-0000-00DF6 Datasheet

Current PartRFQ

XPGBWT-H1-0000-00DZ7

CreeLED, Inc.In Stock: 1650XPGBWT-H1-0000-00DZ7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XPEBWT-H1-0000-00DF6 is determined by the following critical parameters:

• Package Compatibility: Identical 1414 (3535 Metric) surface mount package with matching footprint dimensions (0.136" L x 0.136" W / 3.45mm x 3.45mm) and maximum seated height (0.094" / 2.39mm)
• Electrical Performance: Forward voltage (Vf) within acceptable operating range; test current at 350mA; maximum current rating sufficient for application requirements
• Optical Output: Luminous flux at test conditions; lumens per watt efficiency; viewing angle compatibility
• Color Characteristics: Warm white color category; CRI of 80 or higher
• Regulatory Compliance: RoHS Compliant and REACH Unaffected status maintained

The XPGBWT-H1-0000-00DZ7 meets these substitution criteria through identical package geometry, compatible electrical parameters, and equivalent regulatory compliance.

Parameter Comparison

Engineering Selection Recommendations

Both the XPEBWT-H1-0000-00DF6 and XPGBWT-H1-0000-00DZ7 maintain Active product status with full RoHS Compliance and REACH Unaffected certification. The substitute part XPGBWT-H1-0000-00DZ7 provides identical mechanical compatibility through matching 1414 (3535 Metric) package dimensions and equivalent optical output at the test current of 350mA. The primary differences are correlated color temperature (3750K versus 3000K), forward voltage (2.9V versus 2.72V), and thermal resistance (9°C/W versus 4°C/W). Selection between these parts depends on specific application requirements for color temperature and thermal management characteristics.

Frequently Asked Questions (FAQ)

Q: Can the XPGBWT-H1-0000-00DZ7 be used as a direct replacement for the XPEBWT-H1-0000-00DF6?

A: The XPGBWT-H1-0000-00DZ7 is mechanically and electrically compatible for surface mount applications using the 1414 (3535 Metric) package. Both parts operate at 350mA test current and deliver 111lm luminous flux at 85°C. The substitute part differs in correlated color temperature (3000K versus 3750K) and forward voltage (2.72V versus 2.9V), which must be evaluated against application-specific requirements.

Q: What are the key compatibility factors for substitution?

A: Package geometry, footprint dimensions, and maximum seated height must be identical. Both parts must support the same test current (350mA) and deliver equivalent luminous flux. Forward voltage and thermal resistance differences must be accommodated by circuit design. Color temperature and CRI requirements must align with application specifications.

Q: Are there regulatory compliance differences between these parts?

A: Both the XPEBWT-H1-0000-00DF6 and XPGBWT-H1-0000-00DZ7 are RoHS Compliant and REACH Unaffected. No regulatory compliance barriers exist for substitution.

Q: How do the thermal characteristics differ?

A: The XPGBWT-H1-0000-00DZ7 has a thermal resistance of 4°C/W compared to 9°C/W for the XPEBWT-H1-0000-00DF6. Lower thermal resistance in the substitute part indicates improved heat dissipation characteristics.

Q: What is the significance of the color temperature difference?

A: The XPEBWT-H1-0000-00DF6 operates at 3750K (neutral warm white), while the XPGBWT-H1-0000-00DZ7 operates at 3000K (warmer white). This difference affects the perceived color of emitted light and must align with application lighting requirements.