XPEBWT-H1-0000-00CE8 Equivalent & Substitute Parts

Part Overview

The XPEBWT-H1-0000-00CE8 is an XLamp® XP-E2 warm white LED from CreeLED, Inc., designed for general illumination applications requiring 2700K color temperature. This surface mount device operates at 350mA nominal current with a forward voltage of 2.9V and delivers 104lm at 85°C. The part is currently active in production with full RoHS compliance and REACH unaffected status. Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and regulatory compliance can be maintained across the specified parameter range.

Substiute Parts

XPEBWT-H1-0000-00CE8

CreeLED, Inc.In Stock: 1155XPEBWT-H1-0000-00CE8 Datasheet

Current PartRFQ

XPGBWT-H1-0000-00CZ8

CreeLED, Inc.In Stock: 3317XPGBWT-H1-0000-00CZ8 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The XPGBWT-H1-0000-00CZ8 qualifies as a parametric equivalent based on the following substitution criteria:

Electrical Compatibility:

• Color temperature match: 2700K warm white (identical)
• Flux output at 85°C: 104lm (identical specification range)
• Test current: 350mA (identical)
• Forward voltage: 2.72V (within acceptable tolerance of 2.9V nominal)
• CRI: 80 (identical)

Mechanical Compatibility:

• Package type: 1414 (3535 Metric) (identical)
• Mounting type: Surface Mount (identical)
• Physical dimensions: 3.45 × 3.45mm (identical)
• Height - Seated: 2.39mm (identical)

Regulatory & Compliance:

• RoHS Compliant (identical)
• REACH Unaffected (identical)
• Product Status: Active (identical)

The substitute part operates within the same electrical operating window and occupies the same footprint, enabling direct substitution in circuit designs where the XP-E2 series is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the XPEBWT-H1-0000-00CE8 and XPGBWT-H1-0000-00CZ8 maintain active production status with full regulatory compliance. The substitute part XPGBWT-H1-0000-00CZ8 offers improved thermal performance (4°C/W versus 9°C/W) and higher maximum current rating (1.5A versus 1.0A), while maintaining identical flux output, color temperature, and package footprint. Forward voltage difference of 0.18V is within typical design tolerance for LED driver circuits. Selection between these parts should be based on thermal management requirements and available current headroom in the application circuit.

Frequently Asked Questions (FAQ)

Q: Can XPGBWT-H1-0000-00CZ8 be used as a direct replacement for XPEBWT-H1-0000-00CE8?

A: Yes. Both parts share identical color temperature (2700K), flux output (104lm @ 85°C), test current (350mA), package type (1414/3535 Metric), and physical dimensions. Forward voltage differs by 0.18V, which is accommodated by standard LED driver designs.

Q: What are the key differences between these parts?

A: The substitute part (XP-G2 series) provides lower thermal resistance (4°C/W vs. 9°C/W), higher maximum current rating (1.5A vs. 1.0A), and slightly higher efficiency (109 lm/W vs. 102 lm/W). Both deliver identical luminous flux at the test condition.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both XPEBWT-H1-0000-00CE8 and XPGBWT-H1-0000-00CZ8 are RoHS Compliant and REACH Unaffected.

Q: Do these parts require different PCB footprints?

A: No. Both parts use the 1414 (3535 Metric) package with identical dimensions (3.45 × 3.45mm) and seated height (2.39mm maximum). PCB footprints are interchangeable.

Q: Which part should be selected for high-temperature applications?

A: The XPGBWT-H1-0000-00CZ8 is preferred for applications with elevated ambient temperatures due to its superior thermal resistance (4°C/W).

Q: Is the viewing angle difference significant?

A: The substitute part has a 5° wider viewing angle (115° vs. 110°). This provides slightly broader light distribution and is generally beneficial for general illumination applications.