XPEBWT-H1-0000-00BF7 LED XLamp® XP-E2 Warm White 3250K Equivalent & Substitute Parts

Part Overview

The XPEBWT-H1-0000-00BF7 is a CreeLED XLamp® XP-E2 warm white LED in 1414 (3535 Metric) surface mount package, specified for 3250K color temperature with 350mA test current and 2.9V forward voltage. This component is Active status and RoHS Compliant. Substitute parts are identified within the XLamp® XP-E2 series where electrical and mechanical parameters align with application requirements, particularly when inventory availability or specific color temperature requirements necessitate alternative part selection.

Substiute Parts

XPEBWT-H1-0000-00BF7

CreeLED, Inc.In Stock: 656XPEBWT-H1-0000-00BF7 Datasheet

Current PartRFQ

XPEBWT-H1-0000-00BE7

CreeLED, Inc.In Stock: 2260XPEBWT-H1-0000-00BE7 Datasheet

Parametric EquivalentRFQ

XPEBWT-H1-0000-00BZ7

CreeLED, Inc.In Stock: 2690XPEBWT-H1-0000-00BZ7 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XPEBWT-H1-0000-00BF7 are identified based on strict parameter matching within the XLamp® XP-E2 product family. The following parameters determine substitution eligibility:

• Manufacturer: CreeLED, Inc.
• Series: XLamp® XP-E2
• Mounting Type: Surface Mount
• Package / Case: 1414 (3535 Metric)
• Voltage - Forward (Vf) (Typ): 2.9V
• Current - Test: 350mA
• Current - Max: 1A
• Viewing Angle: 110°
• CRI (Color Rendering Index): 80
• Thermal Resistance of Package: 9°C/W
• Size / Dimension: 0.136" L x 0.136" W (3.45mm x 3.45mm)
• Height - Seated (Max): 0.094" (2.39mm)
• Product Status: Active
• RoHS Status: RoHS Compliant

The identified substitutes differ only in color temperature specification (CCT), which is an application-dependent parameter. Both substitute parts maintain identical electrical performance, thermal characteristics, and mechanical compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three parts—XPEBWT-H1-0000-00BF7, XPEBWT-H1-0000-00BE7, and XPEBWT-H1-0000-00BZ7—maintain Active product status and RoHS Compliance. Selection between these parts is determined by color temperature requirement: the main part specifies 3250K, while both substitutes specify 3000K. Electrical performance, thermal characteristics, and mechanical compatibility are identical across all three parts. Part selection should be based on application color temperature specification and inventory availability.

Frequently Asked Questions (FAQ)

Q: Can XPEBWT-H1-0000-00BE7 or XPEBWT-H1-0000-00BZ7 be used in place of XPEBWT-H1-0000-00BF7?

A: Yes, from an electrical and mechanical standpoint. Both substitute parts share identical voltage, current, thermal resistance, package dimensions, and mounting characteristics. The difference is color temperature: the main part is 3250K while substitutes are 3000K. Selection depends on whether your application can accommodate the warmer 3000K color temperature.

Q: Are there differences in thermal performance between these parts?

A: No. All three parts have identical thermal resistance of 9°C/W and identical flux output of 97lm at 85°C test conditions.

Q: Do all three parts use the same package?

A: Yes. All parts use the 1414 (3535 Metric) surface mount package with identical dimensions of 0.136" L x 0.136" W (3.45mm x 3.45mm) and maximum seated height of 0.094" (2.39mm).

Q: What is the difference between XPEBWT-H1-0000-00BE7 and XPEBWT-H1-0000-00BZ7?

A: These parts are electrically and mechanically identical. Both are 3000K warm white LEDs with the same electrical specifications, thermal characteristics, and package dimensions. Differences, if any, are not specified in the provided parameters.

Q: Are all parts RoHS Compliant?

A: Yes. XPEBWT-H1-0000-00BF7, XPEBWT-H1-0000-00BE7, and XPEBWT-H1-0000-00BZ7 are all RoHS Compliant.

Q: What is the maximum forward current for these LEDs?

A: The maximum forward current is 1A for all three parts, though the test current is 350mA.