XPCROY-L1-0000-00801 Equivalent & Substitute Parts

Part Overview

The XPCROY-L1-0000-00801 is a CreeLED XLamp® XP-C Blue LED operating at 458nm wavelength in a 1414 (3535 Metric) surface mount package. This part is classified as obsolete, making identification of suitable substitute components essential for ongoing production and design requirements. The XP-C series has been superseded by newer LED generations, necessitating equivalent parts that maintain functional compatibility within the specified electrical and mechanical parameters.

Substiute Parts

XPCROY-L1-0000-00801

CreeLED, Inc.In Stock: 732XPCROY-L1-0000-00801 Datasheet

Current PartRFQ

XBDROY-00-0000-000000J01

CreeLED, Inc.In Stock: 1147XBDROY-00-0000-000000J01 Datasheet

SimilarRFQ

ELSW-E81B1-0LPNM-CB7B8

Everlight Electronics Co LtdIn Stock: 818ELSW-E81B1-0LPNM-CB7B8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XPCROY-L1-0000-00801 are identified based on the following critical parameters:

• Color and Wavelength: Blue 458nm (450nm ~ 465nm) range
• Current - Test: 350mA nominal operating point
• Voltage - Forward (Vf): Typical range 3.1V to 3.3V
• Mounting Type: Surface Mount
• Luminous Flux Output: Comparable optical power delivery
• Thermal Characteristics: Package thermal resistance suitable for thermal management requirements

Two substitute parts meet these criteria with varying trade-offs in package size, maximum current rating, and thermal performance.

Parameter Comparison

Engineering Selection Recommendations

XBDROY-00-0000-000000J01 (CreeLED XLamp® XB-D)

This substitute is an active product from the same manufacturer with identical wavelength specification and test current. The XB-D series offers improved thermal performance (6.5°C/W versus 12°C/W) and higher maximum current rating (1A versus 500mA). The primary trade-off is package size reduction from 1414 to 1010 (3535 Metric to 2525 Metric), which requires PCB layout modification. This part is RoHS Compliant and REACH Unaffected, meeting regulatory requirements. Selection is appropriate when PCB space constraints can accommodate the smaller footprint and thermal management benefits are prioritized.

ELSW-E81B1-0LPNM-CB7B8 (Everlight SHWO)

This substitute maintains the same 1414 (3535 Metric) package footprint as the original part, eliminating PCB redesign requirements. Wavelength specification is 465nm (460nm ~ 470nm), representing a 7nm shift toward the longer wavelength end of the blue spectrum. Forward voltage (3.25V) and test current (350mA) are closely matched. Maximum current rating is 700mA. This part is active and suitable for direct footprint replacement when wavelength tolerance permits the longer wavelength operation. Compliance certifications beyond ECCN and HTSUS are not specified.

Frequently Asked Questions (FAQ)

Q: Can XBDROY-00-0000-000000J01 be used as a direct replacement without PCB modification?

A: No. The XBDROY-00-0000-000000J01 uses a 1010 (2525 Metric) package versus the original 1414 (3535 Metric) package. PCB footprint modification is required. However, the smaller package may provide space savings in the overall design.

Q: What is the wavelength difference between the original part and ELSW-E81B1-0LPNM-CB7B8?

A: The original XPCROY operates at 458nm (450nm ~ 465nm). The ELSW-E81B1-0LPNM-CB7B8 operates at 465nm (460nm ~ 470nm). The 7nm shift is within the blue spectrum range but represents a perceptible color shift toward longer wavelengths. Application color matching requirements must be evaluated.

Q: Which substitute offers better thermal performance?

A: The XBDROY-00-0000-000000J01 provides superior thermal performance with 6.5°C/W thermal resistance compared to the original part's 12°C/W. This enables higher sustained current operation and reduced junction temperature under equivalent power dissipation.

Q: Are both substitutes available in the same packaging format?

A: No. XBDROY-00-0000-000000J01 is supplied in Tape & Reel (TR) format. ELSW-E81B1-0LPNM-CB7B8 is supplied in Bulk format. Procurement and assembly process compatibility must be verified.

Q: What is the maximum current difference between substitutes?

A: The original XPCROY-L1-0000-00801 supports 500mA maximum. XBDROY-00-0000-000000J01 supports 1A maximum. ELSW-E81B1-0LPNM-CB7B8 supports 700mA maximum. Circuit design must ensure operating current does not exceed the selected substitute's maximum rating.

Q: Can forward voltage differences affect circuit design?

A: Yes. Forward voltage varies between 3.1V (XBDROY) and 3.3V (original XPCROY) and 3.25V (ELSW-E81B1). In series LED strings or current-limited circuits, cumulative voltage drops must be recalculated to ensure proper circuit operation and current regulation.