XPCROY-L1-0000-00701 Equivalent & Substitute Parts

Part Overview

The XPCROY-L1-0000-00701 is a CreeLED XLamp® XP-C Blue 458nm surface mount LED in a 1414 (3535 Metric) package. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing design requirements and production continuity. The part delivers 275mW luminous flux at 350mA test current with a forward voltage of 3.3V typical.

Substiute Parts

XPCROY-L1-0000-00701

CreeLED, Inc.In Stock: 1168XPCROY-L1-0000-00701 Datasheet

Current PartRFQ

XBDROY-00-0000-000000N01

CreeLED, Inc.In Stock: 1964XBDROY-00-0000-000000N01 Datasheet

SimilarRFQ

ELSW-E81B1-0LPNM-CB7B8

Everlight Electronics Co LtdIn Stock: 818ELSW-E81B1-0LPNM-CB7B8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XPCROY-L1-0000-00701 are identified based on the following critical parameters:

• Color: Blue wavelength in the 450nm to 470nm range
• Mounting Type: Surface Mount
• Current - Test: 350mA nominal operation
• Voltage - Forward (Vf): Typical range 3.1V to 3.25V
• Viewing Angle: 120° to 135°
• Thermal Resistance: Package thermal performance characteristics
• Compliance: REACH and ECCN status

Two substitute parts meet these criteria with allowable variations in package size, maximum current rating, and luminous flux output while maintaining functional compatibility for blue LED applications.

Parameter Comparison

Engineering Selection Recommendations

XBDROY-00-0000-000000N01 (CreeLED XLamp® XB-D)

This substitute is an active product from CreeLED with identical wavelength specification (458nm) and test current (350mA). The primary design consideration is the package size reduction from 1414 to 1010 (2525 Metric), which requires PCB layout verification. The XB-D series delivers higher luminous flux (563mW) at the same test current and features superior thermal resistance (6.5°C/W versus 12°C/W), enabling better thermal management. Maximum current rating increases to 1A, providing additional operational headroom. RoHS compliance and REACH unaffected status support regulatory requirements.

ELSW-E81B1-0LPNM-CB7B8 (Everlight SHWO)

This substitute maintains the 1414 (3535 Metric) package footprint, eliminating PCB layout modifications. Wavelength specification shifts to 465nm (460nm ~ 470nm), representing a 7nm longer wavelength within the blue spectrum. Forward voltage (3.25V) and test current (350mA) remain compatible. The part is active and ECCN classified as EAR99. Package dimensions are nearly identical to the original part, with maximum current rated at 700mA.

Both substitutes are active products with REACH unaffected status and EAR99 ECCN classification, supporting continuity of supply and regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can the XBDROY-00-0000-000000N01 be used as a direct replacement without PCB modifications?

A: The XBDROY-00-0000-000000N01 uses a smaller 1010 (2525 Metric) package compared to the original 1414 (3535 Metric) package. PCB footprint and land pattern modifications are required. Mechanical fit verification is necessary before implementation.

Q: What is the wavelength difference between the original part and the Everlight substitute?

A: The XPCROY-L1-0000-00701 operates at 458nm (450nm ~ 465nm), while the ELSW-E81B1-0LPNM-CB7B8 operates at 465nm (460nm ~ 470nm). Both fall within the blue spectrum range. Application-specific color matching requirements should be evaluated.

Q: Are both substitutes compatible with the original circuit design?

A: Both substitutes operate at 350mA test current and forward voltages within 0.2V of the original part (3.1V to 3.25V versus 3.3V). Circuit designs using current-limiting resistors or constant current sources will accommodate these variations. Thermal management design should account for the different thermal resistance values.

Q: What are the inventory considerations for these substitutes?

A: XBDROY-00-0000-000000N01 has 1928 Pcs in stock (Tape & Reel packaging). ELSW-E81B1-0LPNM-CB7B8 has 778 Pcs in stock (Bulk packaging). Supply availability differs between the two options.

Q: How do the maximum current ratings affect part selection?

A: The original part is rated for 500mA maximum current. XBDROY-00-0000-000000N01 supports 1A maximum, and ELSW-E81B1-0LPNM-CB7B8 supports 700mA maximum. Applications operating above 500mA require thermal and reliability analysis for the selected substitute.