XP0650100L Equivalent & Substitute Parts

Part Overview

The XP0650100L is a Bipolar (BJT) Transistor Array featuring a dual 2 NPN configuration manufactured by Panasonic Electronic Components. This surface mount device is rated for 50V collector-emitter breakdown voltage with a maximum collector current of 100mA and operates at frequencies up to 150MHz. The component is currently classified as obsolete, necessitating identification of functionally equivalent alternatives for ongoing design requirements and production continuity.

Substiute Parts

XP0650100L

Panasonic Electronic ComponentsIn Stock: 5031XP0650100L Datasheet

Current PartRFQ

EMX1DXV6T1G

onsemiIn Stock: 9470EMX1DXV6T1G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XP0650100L is determined by strict equivalence across the following critical parameters:

Mandatory Matching Criteria:

• Transistor configuration: 2 NPN (Dual) array
• Maximum collector current: 100mA minimum
• Collector-emitter breakdown voltage: 50V minimum
• Surface mount packaging: SOT-363 or equivalent footprint compatibility
• Moisture sensitivity level: MSL 1 or better

The EMX1DXV6T1G manufactured by onsemi meets these substitution criteria. Both devices maintain identical maximum ratings for collector current (100mA) and collector-emitter breakdown voltage (50V), operate as dual NPN transistor arrays in surface mount configurations, and share MSL 1 moisture sensitivity classification. The substitute part exceeds the original specification in transition frequency (180MHz versus 150MHz) and maximum power dissipation (500mW versus 150mW), providing enhanced performance margins.

Parameter Comparison

Engineering Selection Recommendations

The EMX1DXV6T1G is the qualified substitute for the obsolete XP0650100L based on the following engineering factors:

Product Status: The EMX1DXV6T1G maintains active product status with onsemi, ensuring continued availability and manufacturing support. The original XP0650100L is classified as obsolete, creating supply chain risk for new production and long-term support requirements.

Electrical Equivalence: Both devices share identical maximum ratings for collector current (100mA) and collector-emitter breakdown voltage (50V). The substitute part provides superior performance margins with higher transition frequency (180MHz) and increased power dissipation capability (500mW), allowing direct substitution without circuit redesign.

Compliance and Certifications: The EMX1DXV6T1G is RoHS3 compliant and REACH unaffected, meeting current regulatory requirements. Both parts carry identical ECCN (EAR99) and HTSUS classifications, ensuring consistent export and tariff treatment.

Packaging Compatibility: While the original part specifies SOT-363 packaging and the substitute uses SOT-563/SOT-666, both are 6-pin surface mount packages with compatible pinout configurations for dual NPN transistor arrays. PCB layout verification is required to confirm footprint compatibility for specific applications.

Frequently Asked Questions (FAQ)

Q: Can the EMX1DXV6T1G directly replace the XP0650100L without circuit modifications?

A: The EMX1DXV6T1G meets all critical electrical specifications for direct substitution. Maximum collector current (100mA) and collector-emitter breakdown voltage (50V) are identical. The substitute part provides enhanced performance with higher transition frequency and power dissipation. PCB footprint compatibility must be verified, as SOT-563 and SOT-363 packages differ in physical dimensions despite similar pinout configurations.

Q: What are the key differences between these two parts?

A: The primary differences are product status (obsolete versus active), packaging designation (SOT-363 versus SOT-563), and performance margins. The EMX1DXV6T1G offers superior transition frequency (180MHz versus 150MHz) and maximum power dissipation (500mW versus 150mW). Vce saturation characteristics differ slightly, with the substitute part showing 400mV at 5mA/50mA versus 300mV at 10mA/100mA for the original.

Q: Are there any compliance or regulatory differences between these parts?

A: The EMX1DXV6T1G provides enhanced regulatory compliance with RoHS3 certification and REACH unaffected status. Both parts share identical ECCN (EAR99) and HTSUS classifications. Moisture sensitivity level is equivalent at MSL 1 (Unlimited) for both devices.

Q: How do the DC current gain specifications compare?

A: The XP0650100L specifies minimum hFE of 160 at 2mA/10V, while the EMX1DXV6T1G specifies minimum hFE of 120 at 1mA/6V. These measurements are taken at different operating points, making direct comparison imprecise. Circuit designs relying on specific gain characteristics should be evaluated against the substitute part's datasheet specifications.

Q: What is the collector cutoff current difference, and does it matter?

A: The XP0650100L specifies maximum collector cutoff current of 100µA, while the EMX1DXV6T1G specifies 500nA (ICBO). The substitute part exhibits significantly lower leakage current, which is advantageous for low-power applications and reduces thermal drift effects. This represents an improvement over the original specification.

Q: Is the SOT-563 package compatible with SOT-363 PCB layouts?

A: SOT-563 and SOT-363 are distinct surface mount packages with different physical dimensions and pin spacing. While both are 6-pin configurations for dual transistor arrays, direct PCB compatibility cannot be assumed. Footprint verification against the specific package drawings is mandatory before design implementation.