XP0440100L Equivalent & Substitute Parts

Part Overview

The Panasonic XP0440100L is a dual PNP bipolar junction transistor array in SMINI6-G1 surface mount packaging. This component is classified as obsolete, necessitating identification of active substitute parts that maintain electrical and mechanical compatibility. The XP0440100L operates at 50V collector-emitter breakdown voltage with 100mA maximum collector current, suitable for general-purpose switching and amplification applications in compact form factors.

Key Parameters

Parameter	Value	Unit
Transistor Type	2 PNP (Dual)	—
Current - Collector (Ic) Max	100	mA
Voltage - Collector Emitter Breakdown (Max)	50	V
Vce Saturation (Max) @ Ib, Ic	500mV @ 10mA, 100mA	—
DC Current Gain (hFE) Min @ Ic, Vce	160 @ 2mA, 10V	—
Power - Max	150	mW
Frequency - Transition	80	MHz
Operating Temperature (TJ)	150	°C
Mounting Type	Surface Mount	—
Package / Case	6-TSSOP, SC-88, SOT-363	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the XP0440100L is determined by the following critical parameters:

Electrical Compatibility Requirements:

Transistor configuration: Dual PNP array
Maximum collector current: ≥100mA
Collector-emitter breakdown voltage: ≥50V (or ≥45V for reduced voltage applications)
Maximum power dissipation: ≥150mW
Transition frequency: ≥80MHz
Operating temperature range: Maximum junction temperature ≥150°C

Mechanical Compatibility Requirements:

Surface mount packaging compatible with 6-TSSOP, SC-88, or SOT-363 footprints
Moisture sensitivity level: MSL 1 (Unlimited)

Substitute parts are grouped into two categories based on voltage rating:

Category A: 50V Rated Substitutes Parts maintaining the original 50V collector-emitter breakdown voltage specification.

Category B: 45V Rated Substitutes Parts with 45V collector-emitter breakdown voltage, suitable for applications where the 5V margin reduction is acceptable within circuit design constraints.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) mA	Vce Breakdown (Max) V	Power (Max) mW	Frequency (Transition) MHz	Package	Product Status
XP0440100L	Panasonic	100	50	150	80	SMINI6-G1	Obsolete
EMT1T2R	Rohm Semiconductor	150	50	150	140	EMT6	Active
BC857BDW1T1G	onsemi	100	45	380	100	SC-88/SC70-6/SOT-363	Active
BC857BS,115	Nexperia USA Inc.	100	45	200	100	6-TSSOP	Active
BC857BS,135	Nexperia USA Inc.	100	45	200	100	6-TSSOP	Active
BC857BS-13-F	Diodes Incorporated	100	45	200	100	SOT-363	Active
BC857BS-7-F	Diodes Incorporated	100	45	200	100	SOT-363	Active
BC857CDW1T1G	onsemi	100	45	380	100	SC-88/SC70-6/SOT-363	Active
BCM857BS,115	Nexperia USA Inc.	100	45	300	175	6-TSSOP	Active
BCM857BS,135	Nexperia USA Inc.	100	45	300	175	6-TSSOP	Active
NST45010MW6T1G	onsemi	100	45	380	100	SC-88/SC70-6/SOT-363	Active

Engineering Selection Recommendations

Primary Substitute (50V Voltage Class):

EMT1T2R (Rohm Semiconductor) is the direct electrical equivalent, maintaining the 50V collector-emitter breakdown voltage specification. This part exceeds the original specifications in collector current (150mA vs. 100mA) and transition frequency (140MHz vs. 80MHz), providing enhanced performance margin. The EMT6 package is mechanically compatible with the original SMINI6-G1 footprint. Product status is active with full RoHS3 compliance.

Secondary Substitutes (45V Voltage Class):

For applications where a 5V reduction in collector-emitter breakdown voltage is acceptable, the following active parts provide direct functional replacement:

BC857BS,115 and BC857BS,135 (Nexperia USA Inc.) are automotive-grade parts qualified to AEC-Q101, available in 6-TSSOP packaging. Both parts are electrically identical, differing only in packaging format (Cut Tape vs. Tape & Reel). These parts feature 100MHz transition frequency and 200mW power rating.

BC857BS-13-F and BC857BS-7-F (Diodes Incorporated) provide SOT-363 package options with identical electrical specifications to the Nexperia BC857BS variants. Both are active products with RoHS3 compliance and extended operating temperature range (-55°C to 150°C).

BC857BDW1T1G and BC857CDW1T1G (onsemi) offer enhanced power dissipation (380mW) in SC-88/SC70-6/SOT-363 packaging. BC857BDW1T1G is available in Cut Tape format, while BC857CDW1T1G is supplied in Tape & Reel format.

Matched Pair Alternatives:

BCM857BS,115 and BCM857BS,135 (Nexperia USA Inc.) are matched pair variants of the BC857 series, featuring 175MHz transition frequency and 300mW power rating. These parts are suitable for applications requiring matched transistor characteristics. Both are automotive-grade and AEC-Q101 qualified.

NST45010MW6T1G (onsemi) is a matched pair device with 380mW power rating and extended temperature range (-55°C to 150°C), available in SC-88/SC70-6/SOT-363 packaging.

Frequently Asked Questions (FAQ)

Q: Can I use a 45V rated substitute in place of the 50V XP0440100L?

A: Yes, provided your circuit design operates below 45V collector-emitter voltage. The 45V rating represents the maximum safe operating voltage for that device. If your application requires the full 50V margin, use EMT1T2R, which maintains the original 50V specification.

Q: What is the difference between BC857BS,115 and BC857BS,135?

A: These parts are electrically identical. The difference is packaging format: BC857BS,115 is supplied in Cut Tape (CT) & Digi-Reel format, while BC857BS,135 is supplied in Tape & Reel (TR) format. Select based on your assembly process requirements.

Q: Are the BCM857 matched pair devices compatible with circuits designed for standard BC857 parts?

A: Yes. BCM857 devices are pin-compatible and electrically compatible with BC857 parts. The matched pair specification indicates tighter matching between the two transistors within the package, beneficial for differential amplifier and current mirror applications. Standard BC857 circuits will function with BCM857 substitutes.

Q: What is the significance of the automotive qualification (AEC-Q101) on BC857BS,115 and BC857BS,135?

A: AEC-Q101 qualification indicates these parts meet automotive industry reliability and quality standards. These parts are suitable for automotive applications and general industrial use. Non-automotive qualified parts may be used in non-automotive applications without restriction.

Q: Can I substitute EMT1T2R for any of the 45V BC857 variants?

A: EMT1T2R is electrically superior to the 45V variants (50V rating, higher current capability, higher frequency), making it a valid substitute. However, the EMT6 package differs from 6-TSSOP and SOT-363 packages. Verify PCB footprint compatibility before selection.

Q: What does MSL 1 (Unlimited) moisture sensitivity mean?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. All listed substitutes carry MSL 1 rating, matching the original part's moisture handling requirements.

Q: Which substitute offers the best performance margin?

A: EMT1T2R provides the highest performance margin with 150mA collector current (vs. 100mA), 140MHz transition frequency (vs. 80MHz), and maintains the original 50V voltage rating. For 45V applications, BC857BDW1T1G and BC857CDW1T1G offer the highest power dissipation (380mW) and transition frequency (100MHz).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message