XMLHVW-Q0-0000-0000LS3E8 Equivalent & Substitute Parts

Part Overview

The XMLHVW-Q0-0000-0000LS3E8 is a Cree LED Xlamp® XM-L HVW warm white LED (2700K) in 2020 (5050 metric) surface mount package. This active product delivers 160 lm at 85°C with a forward voltage of 46V and test current of 44mA, achieving 79 lm/W efficiency. The component is RoHS compliant and REACH unaffected. Substitute parts are identified based on matching electrical characteristics, package dimensions, and mounting compatibility within the 2020 SMD form factor.

Substiute Parts

XMLHVW-Q0-0000-0000LS3E8

CreeLED, Inc.In Stock: 977XMLHVW-Q0-0000-0000LS3E8 Datasheet

Current PartRFQ

XMLHVW-Q2-0000-0000LS3E8

CreeLED, Inc.In Stock: 1554XMLHVW-Q2-0000-0000LS3E8 Datasheet

Parametric EquivalentRFQ

PSL0102WBEB1

ROHM SemiconductorIn Stock: 2686PSL0102WBEB1 Datasheet

SimilarRFQ

PSL0102WBEC1

ROHM SemiconductorIn Stock: 1640PSL0102WBEC1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XMLHVW-Q0-0000-0000LS3E8 are identified based on the following criteria:

Parametric Equivalent: Parts matching all critical electrical and mechanical parameters—forward voltage, test current, package dimensions (2020 SMD), mounting type, and color temperature—are classified as parametric equivalents. These parts are direct functional replacements.

Similar Parts: Parts sharing the same package footprint (2020 metric) and surface mount mounting type but differing in color temperature (CCT), forward voltage, test current, or flux output are classified as similar parts. These require circuit design review due to electrical parameter differences.

Key Substitution Parameters:

• Package / Case: 2020 (5050 Metric)
• Mounting Type: Surface Mount
• Size / Dimension: 0.197" L × 0.197" W (5.00 mm × 5.00 mm)
• Color / CCT: White, Warm (2700K) for parametric equivalents
• Voltage - Forward (Typ): 46V for parametric equivalents
• Current - Test: 44mA for parametric equivalents

Parameter Comparison

Engineering Selection Recommendations

XMLHVW-Q2-0000-0000LS3E8 is the primary parametric equivalent. It matches all critical electrical parameters (46V forward voltage, 44mA test current), thermal characteristics (4.6°C/W), and optical output (160 lm @ 85°C, 79 lm/W). Both parts are active products with RoHS compliance and REACH unaffected status. This part is suitable for direct substitution in existing designs without circuit modification.

PSL0102WBEB1 and PSL0102WBEC1 are similar parts sharing the 2020 SMD package footprint but with significantly different electrical characteristics. These ROHM Semiconductor parts operate at 3.3V forward voltage (versus 46V) and 120mA test current (versus 44mA), requiring complete circuit redesign. Both are obsolete products. PSL0102WBEC1 offers higher CRI (90 versus 80) but lower lm/W efficiency (75 versus 79). These parts are not suitable for direct substitution and should only be considered if circuit topology allows for the lower voltage and higher current requirements.

Frequently Asked Questions (FAQ)

Q: Can XMLHVW-Q2-0000-0000LS3E8 replace XMLHVW-Q0-0000-0000LS3E8 without design changes?

A: Yes. XMLHVW-Q2-0000-0000LS3E8 is a parametric equivalent with identical forward voltage (46V), test current (44mA), thermal resistance (4.6°C/W), and optical output (160 lm @ 85°C). Both are active Cree Xlamp® XM-L HVW products with matching RoHS and REACH compliance. No circuit modification is required.

Q: Why are PSL0102WBEB1 and PSL0102WBEC1 listed as similar rather than equivalent?

A: These ROHM parts operate at 3.3V forward voltage and 120mA test current, compared to 46V and 44mA for the main part. The voltage and current differences require circuit redesign. Additionally, both are obsolete products. They share only the 2020 SMD package footprint and surface mount mounting type.

Q: What is the difference between PSL0102WBEB1 and PSL0102WBEC1?

A: Both operate at 3.3V and 120mA. PSL0102WBEC1 has higher CRI (90 versus 80) and lower flux output (30 lm @ 25°C versus 38 lm). PSL0102WBEB1 achieves higher lm/W efficiency (95 versus 75). Both are obsolete ROHM products with ROHS3 compliance and MSL 3 moisture sensitivity.

Q: Are packaging differences significant between these parts?

A: Yes. XMLHVW-Q0-0000-0000LS3E8 and XMLHVW-Q2-0000-0000LS3E8 are supplied in Tape & Reel (TR) packaging. PSL0102WBEB1 and PSL0102WBEC1 are supplied in Cut Tape (CT) packaging. All share the same 2020 (5050 metric) footprint and height specifications for the main parts (0.130" max seated height for Cree; 0.039" for ROHM), but ROHM parts are significantly lower profile.

Q: Can I use PSL0102 parts if my circuit supports 3.3V operation?

A: Circuit voltage compatibility is necessary but not sufficient. PSL0102WBEB1 and PSL0102WBEC1 are obsolete products. Current availability and long-term supply cannot be assured. Additionally, the color temperature differs (5000K cool white versus 2700K warm white), affecting application suitability. Design review with supply chain confirmation is required.