XMLHVW-Q0-0000-0000HT2E7 Equivalent & Substitute Parts

Part Overview

The XMLHVW-Q0-0000-0000HT2E7 is a Cree LED Xlamp® XM-L HVW warm white LED operating at 3000K color temperature. This surface mount device is designed for high-voltage applications with a forward voltage of 46V and test current of 44mA. The part is currently active in production status. Due to the active product lifecycle and availability considerations, equivalent substitute parts from alternative manufacturers may be required for design flexibility, supply chain continuity, or specific application requirements.

Substiute Parts

XMLHVW-Q0-0000-0000HT2E7

CreeLED, Inc.In Stock: 1141XMLHVW-Q0-0000-0000HT2E7 Datasheet

Current PartRFQ

PSL0102WBEB1

ROHM SemiconductorIn Stock: 2686PSL0102WBEB1 Datasheet

SimilarRFQ

PSL0102WBEC1

ROHM SemiconductorIn Stock: 1640PSL0102WBEC1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XMLHVW-Q0-0000-0000HT2E7 is constrained by the following critical parameters:

Mechanical Compatibility: Package type (2020/5050 Metric), mounting type (Surface Mount), and physical dimensions (5.00mm x 5.00mm footprint) must match exactly to ensure PCB compatibility without redesign.

Electrical Characteristics: Forward voltage (Vf), test current, and maximum current ratings determine circuit compatibility. The XMLHVW operates at 46V with a 44mA test current, which is significantly different from standard low-voltage LED designs.

Optical Properties: Color temperature (3000K warm white), CRI (80), and luminous flux output define the lighting performance requirements.

Regulatory Compliance: RoHS and REACH compliance status must be maintained for end-product certification.

The substitute parts listed (PSL0102WBEB1 and PSL0102WBEC1) share the same package footprint (2020/5050 Metric) and surface mount configuration. However, these parts operate at substantially different electrical parameters (3.3V forward voltage, 120mA test current) and different color temperature (5000K cool white versus 3000K warm white). These differences indicate that direct functional substitution is not supported by the provided electrical and optical parameters.

Parameter Comparison

Engineering Selection Recommendations

The XMLHVW-Q0-0000-0000HT2E7 maintains active product status with full RoHS and REACH compliance. The listed substitute parts (PSL0102WBEB1 and PSL0102WBEC1) are both marked as obsolete, which presents a significant constraint for long-term supply chain planning.

From a compliance perspective, all three parts meet RoHS and REACH requirements. The ROHM PSL0102 series parts carry ROHS3 compliance with Moisture Sensitivity Level 3 (168 Hours), whereas the Cree part specifies standard RoHS compliance.

The critical divergence between the main part and substitute parts lies in electrical architecture: the XMLHVW operates as a high-voltage device (46V), while the PSL0102 series are low-voltage devices (3.3V). This fundamental difference in forward voltage means these parts cannot be directly substituted in the same circuit without complete redesign of the power supply and current-limiting circuitry.

Additionally, the color temperature difference (3000K warm white versus 5000K cool white) and the height variance (3.30mm versus 1.00mm) represent optical and mechanical incompatibilities that extend beyond simple component swapping.

Frequently Asked Questions (FAQ)

Q: Can PSL0102WBEB1 or PSL0102WBEC1 be used as direct replacements for XMLHVW-Q0-0000-0000HT2E7?

A: No. While both substitute parts share the same 2020 (5050 Metric) package footprint and surface mount configuration, they differ fundamentally in forward voltage (3.3V versus 46V), color temperature (5000K cool white versus 3000K warm white), and mounted height (1.00mm versus 3.30mm). Direct substitution would require circuit redesign.

Q: What are the key parameters that determine substitution compatibility?

A: Substitution compatibility is determined by: package type and footprint (2020/5050 Metric), mounting type (Surface Mount), forward voltage (Vf), test current, color temperature (CCT), and physical height. All of these must align with the application requirements.

Q: Why are the substitute parts listed as obsolete?

A: Both PSL0102WBEB1 and PSL0102WBEC1 are marked as obsolete products. This status indicates these parts are no longer in active production and may have limited availability. For new designs, the active XMLHVW-Q0-0000-0000HT2E7 is the recommended choice.

Q: Are there compliance differences between the main part and substitutes?

A: All three parts meet RoHS and REACH requirements. The ROHM PSL0102 series specifies ROHS3 compliance with MSL 3 (168 Hours) moisture sensitivity, while the Cree part specifies standard RoHS compliance. Both are acceptable for regulated applications.

Q: What is the impact of the height difference between these parts?

A: The XMLHVW has a maximum seated height of 3.30mm, while the PSL0102 series have a maximum seated height of 1.00mm. This 2.30mm difference affects PCB clearance, thermal management, and optical beam path in the application. Height compatibility must be verified for each specific design.

Q: How do the luminous flux and efficiency ratings compare?

A: The XMLHVW delivers 210lm at 85°C with 104 lm/W efficiency at 44mA test current. The PSL0102WBEB1 delivers 38lm at 25°C with 95 lm/W efficiency, and the PSL0102WBEC1 delivers 30lm at 25°C with 75 lm/W efficiency. These significant differences in output and efficiency reflect the different voltage classes and applications these parts are designed for.