XMLEZW-02-0000-0B0PT330F Equivalent & Substitute Parts

Part Overview

The XMLEZW-02-0000-0B0PT330F is a CreeLED EasyWhite™ XLamp® XM-L warm white LED (3000K) in 2020 (5050 metric) surface mount package. This component is classified as obsolete, making identification of compatible substitute parts essential for ongoing production and maintenance applications. The part delivers 230lm at 85°C under 700mA test current with a forward voltage of 6V and 115° viewing angle. Due to its obsolete status, equivalent parts from the active product portfolio must be evaluated based on matching electrical and mechanical parameters.

Substiute Parts

XMLEZW-02-0000-0B0PT330F

CreeLED, Inc.In Stock: 1170XMLEZW-02-0000-0B0PT330F Datasheet

Current PartRFQ

XHP50B-00-0000-0D0UG230G

CreeLED, Inc.In Stock: 828XHP50B-00-0000-0D0UG230G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XMLEZW-02-0000-0B0PT330F is based on the following critical parameters:

Mechanical Compatibility:

• Package type: 2020 (5050 metric) surface mount
• Physical dimensions: 5.00mm x 5.00mm footprint
• Height constraint: Maximum seated height must not exceed application clearance

Electrical Compatibility:

• Color temperature: Warm white 3000K (±MacAdam ellipse tolerance)
• Forward voltage: 6V nominal operation
• Current rating: 700mA test current with 2A maximum rating
• Luminous flux: Minimum 220lm at 85°C under test conditions
• Color rendering: CRI ≥ 85

Regulatory & Environmental:

• RoHS compliance required
• MSL rating: 1 (Unlimited moisture sensitivity)
• REACH unaffected status

The substitute part XHP50B-00-0000-0D0UG230G meets these criteria while offering improved performance characteristics and active product status.

Parameter Comparison

Engineering Selection Recommendations

The XHP50B-00-0000-0D0UG230G is a direct substitute for the obsolete XMLEZW-02-0000-0B0PT330F based on the following engineering criteria:

Mechanical Fit: Both components use identical 2020 (5050 metric) surface mount packages with 5.00mm x 5.00mm footprints. The substitute has a maximum seated height of 3.63mm compared to 3.15mm for the original part. Height clearance in the application must be verified to accommodate this 0.48mm increase.

Electrical Operation: The substitute supports 6V operation at 700mA, matching the original part's primary operating point. At this current level, the substitute delivers superior performance with higher luminous flux and efficiency. The substitute's dual voltage capability (6V and 12V) provides design flexibility for future applications.

Color Specification: Both parts deliver warm white 3000K color temperature within acceptable MacAdam ellipse tolerances. The substitute offers improved color rendering (CRI 90 versus 85) and wider viewing angle (120° versus 115°).

Regulatory Compliance: Both parts are RoHS compliant and manufactured by CreeLED, Inc. The substitute carries active product status, ensuring long-term availability and supply chain stability.

Thermal Performance: The substitute exhibits superior thermal characteristics with 1.2°C/W thermal resistance compared to 2.5°C/W for the original part, enabling better heat dissipation in thermal-constrained applications.

Frequently Asked Questions (FAQ)

Q: Can the XHP50B-00-0000-0D0UG230G be used as a direct drop-in replacement for the XMLEZW-02-0000-0B0PT330F?

A: The substitute is mechanically and electrically compatible for 6V 700mA operation. The primary consideration is the 0.48mm increase in maximum seated height (3.63mm versus 3.15mm). PCB layout and enclosure clearance must be verified before implementation.

Q: What are the key differences in performance between these two parts?

A: At 700mA test current, the substitute delivers 810lm compared to 230lm for the original part, representing a 4.6x increase in luminous flux. Efficiency improves from 55 lm/W to 103 lm/W. Color rendering index increases from 85 to 90, and viewing angle expands from 115° to 120°.

Q: Are both parts suitable for the same thermal environment?

A: The substitute has superior thermal performance with 1.2°C/W thermal resistance versus 2.5°C/W for the original. This allows the substitute to operate at lower junction temperatures under identical power dissipation conditions, extending component life and reliability.

Q: What is the significance of the MacAdam ellipse specification difference?

A: The original part specifies 4-step MacAdam ellipse tolerance while the substitute specifies 3-step. Both maintain 3000K warm white color temperature. The 3-step tolerance represents tighter color consistency control, resulting in more uniform color appearance across production batches.

Q: Does the substitute support dual voltage operation?

A: Yes, the XHP50B-00-0000-0D0UG230G supports both 6V and 12V operation with corresponding current ratings (700mA or 1.4A at 6V; 700mA at 12V). The original XMLEZW part is rated for 6V operation only.

Q: What packaging format is available for the substitute part?

A: The XHP50B-00-0000-0D0UG230G is supplied in Tape & Reel (TR) format, suitable for automated assembly processes. Reel specifications and quantity per reel should be confirmed with the supplier for production planning.

Q: Are there any moisture sensitivity or storage requirement differences?

A: The original part specifies MSL 1 (Unlimited moisture sensitivity). The substitute's MSL rating is not specified in the provided data. Storage and handling procedures should follow CreeLED guidelines for both components.