XMLEZW-00-0000-0B0PT330H Equivalent & Substitute Parts

Part Overview

The XMLEZW-00-0000-0B0PT330H is a CreeLED EasyWhite™ XLamp® XM-L warm white LED with a color temperature of 3000K, designed for surface mount applications in the 2020 (5050 metric) package. This component is classified as obsolete, making identification of suitable substitute parts essential for ongoing production and design requirements. The part delivers 230 lumens at 85°C under 700mA test current with a forward voltage of 6V and a viewing angle of 115°.

Substiute Parts

XMLEZW-00-0000-0B0PT330H

CreeLED, Inc.In Stock: 1207XMLEZW-00-0000-0B0PT330H Datasheet

Current PartRFQ

XHP50B-00-0000-0D0UG230H

CreeLED, Inc.In Stock: 1028XHP50B-00-0000-0D0UG230H Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The XHP50B-00-0000-0D0UG230H qualifies as a substitute for the XMLEZW-00-0000-0B0PT330H based on the following alignment of critical parameters:

Matching Parameters:

• Color temperature: 3000K 2-Step MacAdam Ellipse (identical warm white specification)
• Package type: 2020 (5050 Metric) surface mount (identical physical footprint)
• Physical dimensions: 0.197" L x 0.197" W (5.00mm x 5.00mm) (identical)
• Mounting type: Surface Mount (identical)
• RoHS compliance: RoHS Compliant (identical regulatory status)
• REACH status: REACH Unaffected (identical)
• ECCN classification: EAR99 (identical)
• HTSUS code: 8541.41.0000 (identical)

Operational Compatibility: The substitute part operates at the same 6V forward voltage as the main part at 700mA test current, enabling direct circuit-level compatibility. Both parts support the same 2020 package footprint and mounting methodology, allowing PCB-level substitution without layout modifications.

Parameter Comparison

Engineering Selection Recommendations

The XHP50B-00-0000-0D0UG230H is an active product from CreeLED, Inc., providing continuity for applications currently using the obsolete XMLEZW-00-0000-0B0PT330H. Both parts maintain identical RoHS compliance, REACH status, and export classification (EAR99), ensuring regulatory alignment across supply chain transitions.

The substitute part operates within the same 6V forward voltage specification at 700mA test current, supporting direct electrical substitution in existing circuit designs. The identical 2020 (5050 metric) package footprint and surface mount configuration enable PCB-level compatibility without layout redesign.

Height variation between the parts (0.124" maximum for the main part versus 0.143" maximum for the substitute) must be evaluated against specific assembly clearance requirements. The substitute part exhibits improved thermal performance (1.2°C/W versus 2.5°C/W) and higher luminous efficacy (103 lm/W versus 55 lm/W), supporting enhanced thermal management in applications where heat dissipation is a design consideration.

Frequently Asked Questions (FAQ)

Q: Can the XHP50B-00-0000-0D0UG230H be used as a direct replacement for the XMLEZW-00-0000-0B0PT330H?

A: Yes, at the 700mA test current and 6V forward voltage specification. Both parts share identical color temperature (3000K), package type (2020/5050 metric), and physical footprint (5.00mm x 5.00mm). The substitute part is electrically compatible at this operating point.

Q: What are the key differences between these parts?

A: The substitute part (XHP50B) is an active product with higher luminous output (810lm versus 230lm at 85°C), improved color rendering index (90 versus 85), and superior thermal resistance (1.2°C/W versus 2.5°C/W). The substitute part also supports dual voltage operation (6V and 12V) and higher current ratings. Height differs by 0.019" (0.48mm) maximum.

Q: Are there any height clearance concerns?

A: The substitute part has a maximum seated height of 0.143" compared to 0.124" for the original part, representing a 0.019" (0.48mm) increase. Applications with tight vertical clearance constraints must verify this dimension against specific assembly requirements.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are RoHS Compliant, REACH Unaffected, and classified as EAR99 for export purposes. Regulatory compliance is maintained across the substitution.

Q: What is the packaging difference?

A: The original part is supplied in standard packaging, while the substitute part is available in Tape & Reel (TR) format. This affects supply chain logistics but does not impact component functionality or performance.

Q: Can the substitute part operate at higher currents?

A: Yes. The XHP50B-00-0000-0D0UG230H supports maximum currents of 3A at 6V and 1.5A at 12V, compared to the 2A maximum for the original part. However, substitution at the 700mA test current maintains electrical equivalence with the original design.