XMLBWT-00-0000-000PS60Z7 LED XLamp® XM-L2 Warm White 3000K Equivalent & Substitute Parts

Part Overview

The XMLBWT-00-0000-000PS60Z7 is a CreeLED XLamp® XM-L2 warm white LED with a correlated color temperature of 3000K, designed for surface mount applications in the 2020 (5050 metric) package. This part delivers 191 lumens at 85°C under 700mA test current with a forward voltage of 2.72V and maintains an active product status. Substitution becomes necessary when the primary part is unavailable, when inventory constraints require alternative sourcing, or when design flexibility permits operation within the electrical and mechanical tolerances of qualified alternatives.

Substiute Parts

XMLBWT-00-0000-000PS60Z7

CreeLED, Inc.In Stock: 862XMLBWT-00-0000-000PS60Z7 Datasheet

Current PartRFQ

PSL0102WBEB1

ROHM SemiconductorIn Stock: 2686PSL0102WBEB1 Datasheet

SimilarRFQ

PSL0102WBEC1

ROHM SemiconductorIn Stock: 1640PSL0102WBEC1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XMLBWT-00-0000-000PS60Z7 is evaluated based on the following critical parameters: package compatibility (2020/5050 metric), surface mount mounting type, mechanical dimensions (5.00mm × 5.00mm footprint, maximum seated height 3.15mm), and electrical operating characteristics within acceptable ranges.

The identified substitute parts PSL0102WBEB1 and PSL0102WBEC1 (both ROHM Semiconductor PSL0102 series) share the identical 2020 (5050 metric) package footprint and surface mount configuration. However, these substitutes operate at a different correlated color temperature (5000K cool white versus 3000K warm white), different forward voltage (3.3V versus 2.72V), different test current (120mA versus 700mA), and different maximum current ratings (200mA versus 3A). These differences establish that substitution is conditional and application-dependent, not universal.

Substitution is permissible only in applications where:

• The 2020 (5050 metric) package footprint and surface mount configuration are required
• The mechanical envelope (5.00mm × 5.00mm, maximum 3.15mm height) is compatible with the PCB layout
• The color temperature shift from 3000K warm white to 5000K cool white is acceptable for the end application
• The circuit design can accommodate the different forward voltage (3.3V) and lower operating current (120mA test current)
• The lower maximum current rating (200mA) meets the application's power budget

Parameter Comparison

Engineering Selection Recommendations

The XMLBWT-00-0000-000PS60Z7 maintains active product status with RoHS compliance, making it the preferred choice for new designs and ongoing production. The substitute parts PSL0102WBEB1 and PSL0102WBEC1 are classified as obsolete, which introduces supply chain risk and limits their suitability for long-term production commitments.

Both substitute parts achieve ROHS3 compliance and maintain the required 2020 (5050 metric) package footprint. However, the substitutes present significant electrical and photometric differences: the forward voltage increases from 2.72V to 3.3V, the test current decreases from 700mA to 120mA, and the maximum current rating drops from 3A to 200mA. These changes require circuit redesign to accommodate the different electrical characteristics.

The color temperature shift from 3000K warm white to 5000K cool white represents a fundamental change in light output characteristics and is not interchangeable in applications where warm white illumination is specified. PSL0102WBEC1 offers superior color rendering (CRI 90 versus 85) but lower luminous efficacy (75 lm/W versus 96 lm/W). PSL0102WBEB1 maintains comparable luminous efficacy (95 lm/W) with lower color rendering (CRI 80).

Substitution should be pursued only when the XMLBWT-00-0000-000PS60Z7 is unavailable and the application requirements permit operation at 5000K color temperature with the reduced current and power characteristics of the PSL0102 series.

Frequently Asked Questions (FAQ)

Q: Can PSL0102WBEB1 or PSL0102WBEC1 be used as direct drop-in replacements for XMLBWT-00-0000-000PS60Z7?

A: No. While all three parts share the identical 2020 (5050 metric) package footprint and surface mount configuration, the electrical characteristics differ significantly. The forward voltage increases from 2.72V to 3.3V, requiring circuit modifications. The test current decreases from 700mA to 120mA, and maximum current is limited to 200mA versus 3A. Additionally, the color temperature changes from 3000K warm white to 5000K cool white. These differences necessitate design review and potential circuit redesign before substitution.

Q: What is the primary limitation of the PSL0102 substitute parts?

A: Both PSL0102WBEB1 and PSL0102WBEC1 are classified as obsolete products. This status creates supply chain uncertainty and limits their viability for production quantities or long-term commitments. The XMLBWT-00-0000-000PS60Z7 remains in active production and is the recommended choice for new designs.

Q: How does the color temperature difference affect substitution?

A: The XMLBWT-00-0000-000PS60Z7 produces warm white light at 3000K, while both PSL0102 substitutes produce cool white light at 5000K. This represents a significant shift in light output characteristics. Substitution is permissible only in applications where cool white illumination is acceptable or where the end user can tolerate the color temperature change. Applications specifying warm white lighting cannot use these substitutes without compromising performance.

Q: Are the mechanical dimensions compatible?

A: The footprint dimensions are identical (5.00mm × 5.00mm). However, the seated height differs: the XMLBWT-00-0000-000PS60Z7 has a maximum seated height of 3.15mm, while the PSL0102 parts are limited to 1.00mm. This lower profile may affect thermal management and optical design in applications where the taller package height was factored into the design. Verify that the reduced height is compatible with the PCB layout and optical requirements.

Q: Which substitute part offers better color rendering?

A: PSL0102WBEC1 provides superior color rendering with a CRI of 90 compared to 85 for the main part and 80 for PSL0102WBEB1. However, PSL0102WBEC1 exhibits lower luminous efficacy (75 lm/W versus 96 lm/W for the main part). PSL0102WBEB1 maintains comparable luminous efficacy (95 lm/W) with lower color rendering (CRI 80). The choice between substitutes depends on whether color rendering or luminous efficacy is prioritized in the application.

Q: What compliance certifications apply to these parts?

A: The XMLBWT-00-0000-000PS60Z7 is RoHS Compliant. Both substitute parts are ROHS3 Compliant and carry MSL (Moisture Sensitivity Level) 3 ratings with a 168-hour specification window. All three parts are REACH Unaffected and classified under ECCN EAR99 and HTSUS 8541.41.0000.