XMLBWT-00-0000-000HT30Z6 LED XLamp® XM-L2 Warm White 3500K Equivalent & Substitute Parts

Part Overview

The XMLBWT-00-0000-000HT30Z6 is a Cree LED XLamp® XM-L2 warm white LED with a correlated color temperature (CCT) of 3500K, designed for surface mount applications in the 2020 (5050 metric) package. This part is currently active in production. Substitute parts may be required due to inventory constraints, supply chain discontinuations, or specific application requirements that align with alternative electrical and mechanical parameters.

Substiute Parts

XMLBWT-00-0000-000HT30Z6

CreeLED, Inc.In Stock: 1166XMLBWT-00-0000-000HT30Z6 Datasheet

Current PartRFQ

XMLBWT-00-0000-000HT30E7

CreeLED, Inc.In Stock: 2171XMLBWT-00-0000-000HT30E7 Datasheet

Parametric EquivalentRFQ

PSL0102WBEB1

ROHM SemiconductorIn Stock: 2686PSL0102WBEB1 Datasheet

SimilarRFQ

PSL0102WBEC1

ROHM SemiconductorIn Stock: 1640PSL0102WBEC1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XMLBWT-00-0000-000HT30Z6 are classified based on the following allowed substitution criteria:

Parametric Equivalent: Parts that maintain identical or near-identical electrical characteristics (forward voltage, test current, maximum current, luminous flux output, and thermal resistance) while differing only in color temperature (CCT). These parts are direct functional replacements within the same product series and package.

Similar Parts: Parts that share the same physical package (2020/5050 metric), mounting type (surface mount), and general application category but differ significantly in electrical parameters (forward voltage, current ratings, flux output, efficiency) and color temperature. These parts require circuit design review and are suitable only when application requirements permit parameter variation.

The key parameters determining substitution eligibility are:

• Package / Case (2020/5050 Metric)
• Mounting Type (Surface Mount)
• Forward Voltage (Vf) compatibility with circuit design
• Current ratings (test and maximum)
• Luminous flux output and efficiency
• Color temperature (CCT) and CRI requirements

Parameter Comparison

Engineering Selection Recommendations

XMLBWT-00-0000-000HT30E7 (Parametric Equivalent): This part is the primary substitute for the XMLBWT-00-0000-000HT30Z6. Both parts are manufactured by CreeLED, Inc., belong to the XLamp® XM-L2 series, and share identical electrical specifications (2.72V forward voltage, 700mA test current, 3A maximum current, 115 lm/W efficiency, 2.5°C/W thermal resistance). The only difference is the color temperature: 3000K versus 3500K. This part is active in production and maintains full RoHS and REACH compliance. Selection of this substitute is appropriate when a slightly warmer color temperature (3000K) is acceptable within application requirements.

PSL0102WBEB1 and PSL0102WBEC1 (Similar Parts): These ROHM Semiconductor PSL0102 series LEDs share the same 2020 (5050 metric) package and surface mount configuration but differ substantially in electrical performance. Both parts operate at 3.3V forward voltage (0.58V higher than the main part), 120mA test current (83% lower), and 200mA maximum current (93% lower). Luminous flux output is significantly reduced (38lm and 30lm respectively versus 230lm), and efficiency is lower (95 lm/W and 75 lm/W versus 115 lm/W). Additionally, both parts are marked as obsolete and operate at 5000K (cool white) rather than warm white. These parts are suitable only for applications where lower current operation, reduced light output, and cool color temperature are acceptable. Circuit design modifications are required to accommodate the higher forward voltage and lower current ratings.

Frequently Asked Questions (FAQ)

Q: Can XMLBWT-00-0000-000HT30E7 be used as a direct replacement for XMLBWT-00-0000-000HT30Z6?

A: Yes. Both parts are manufactured by CreeLED, Inc., share the XLamp® XM-L2 series designation, and have identical electrical specifications (forward voltage, current ratings, thermal resistance, and efficiency). The only difference is color temperature (3000K versus 3500K). No circuit modifications are required. Compatibility depends on whether the application can accept the warmer color temperature.

Q: Why are PSL0102WBEB1 and PSL0102WBEC1 classified as similar rather than equivalent?

A: These ROHM parts differ significantly in electrical parameters. Forward voltage is 0.58V higher (3.3V versus 2.72V), test current is 83% lower (120mA versus 700mA), and maximum current is 93% lower (200mA versus 3A). Luminous flux output is reduced by approximately 84–87%, and efficiency is lower. These parts also operate at 5000K (cool white) instead of warm white. Circuit design review and modifications are necessary before substitution.

Q: What is the physical compatibility between the main part and substitute parts?

A: All parts in this comparison use the 2020 (5050 metric) package with identical footprint dimensions (0.197" L × 0.197" W / 5.00mm × 5.00mm). However, the PSL0102 series parts have a significantly lower seated height (0.039" / 1.00mm versus 0.124" / 3.15mm). This difference may affect PCB layout clearance and thermal management considerations.

Q: Are there compliance or regulatory differences between these parts?

A: The main part and XMLBWT-00-0000-000HT30E7 are both RoHS Compliant and REACH Unaffected. The PSL0102 series parts are ROHS3 Compliant and REACH Unaffected. All parts carry EAR99 ECCN classification and 8541.41.0000 HTSUS code. The PSL0102 series parts have a Moisture Sensitivity Level (MSL) rating of 3 (168 hours), which is not specified for the XLamp® XM-L2 parts.

Q: What is the inventory status of these parts?

A: XMLBWT-00-0000-000HT30Z6 has 1,096 pieces in stock. XMLBWT-00-0000-000HT30E7 has 2,061 pieces in stock. PSL0102WBEB1 has 2,638 pieces in stock. PSL0102WBEC1 has 1,627 pieces in stock. Product status should be verified before final procurement decisions, as the PSL0102 series parts are marked as obsolete.

Q: What packaging format differences exist?

A: XMLBWT-00-0000-000HT30Z6 and XMLBWT-00-0000-000HT30E7 are supplied in Tape & Reel (TR) format. PSL0102WBEB1 and PSL0102WBEC1 are supplied in Cut Tape (CT) format. This difference may affect handling, storage, and assembly line compatibility.