XMLBWT-00-0000-000HT30Z5 Equivalent & Substitute Parts

Part Overview

The XMLBWT-00-0000-000HT30Z5 is a Cree XLamp® XM-L2 neutral white LED in 2020 (5050 metric) surface mount package. This part operates at 700mA with a forward voltage of 2.72V and delivers 230lm at 85°C. The product is currently active in production. Substitute parts may be required due to supply constraints, inventory availability, or specific application requirements where alternative electrical characteristics are acceptable within system design parameters.

Substiute Parts

XMLBWT-00-0000-000HT30Z5

CreeLED, Inc.In Stock: 880XMLBWT-00-0000-000HT30Z5 Datasheet

Current PartRFQ

PSL0102WBEB1

ROHM SemiconductorIn Stock: 2686PSL0102WBEB1 Datasheet

SimilarRFQ

PSL0102WBEC1

ROHM SemiconductorIn Stock: 1640PSL0102WBEC1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XMLBWT-00-0000-000HT30Z5 are identified based on the following allowable parameters:

• Package / Case: 2020 (5050 Metric) surface mount form factor
• Mounting Type: Surface Mount
• Size / Dimension: 0.197" L x 0.197" W (5.00mm x 5.00mm)
• Color: White (neutral or cool white acceptable)
• CRI (Color Rendering Index): 80 or higher
• RoHS Compliance: RoHS3 or RoHS Compliant

The substitute parts PSL0102WBEB1 and PSL0102WBEC1 from ROHM Semiconductor meet these mechanical and compliance criteria. However, these substitutes operate at different electrical parameters: lower test current (120mA vs. 700mA), higher forward voltage (3.3V vs. 2.72V), and significantly lower luminous flux (30lm–38lm vs. 230lm). These differences require circuit design modifications and are suitable only for applications where lower light output is acceptable.

Parameter Comparison

Engineering Selection Recommendations

The XMLBWT-00-0000-000HT30Z5 remains the primary selection for applications requiring 230lm output at 700mA test current with neutral white color temperature (4000K) and active product status.

PSL0102WBEB1 and PSL0102WBEC1 are obsolete products and should be selected only when the XMLBWT-00-0000-000HT30Z5 is unavailable and application requirements permit operation at significantly reduced luminous flux (30lm–38lm), higher forward voltage (3.3V), and lower test current (120mA). Both substitute parts meet RoHS3 compliance and maintain the 2020 (5050 metric) package footprint. PSL0102WBEC1 offers higher CRI (90 vs. 80) compared to PSL0102WBEB1, at the cost of lower luminous efficiency (75 lm/W vs. 95 lm/W).

Frequently Asked Questions (FAQ)

Q: Can PSL0102WBEB1 or PSL0102WBEC1 be used as direct drop-in replacements for XMLBWT-00-0000-000HT30Z5?

A: No. While all three parts share the same 2020 (5050 metric) package footprint and surface mount mounting type, the substitute parts operate at different electrical parameters. The ROHM parts require 120mA test current versus 700mA for the Cree part, have higher forward voltage (3.3V vs. 2.72V), and deliver significantly lower luminous flux (30lm–38lm vs. 230lm). Circuit design modifications are required.

Q: What is the primary difference between PSL0102WBEB1 and PSL0102WBEC1?

A: Both parts operate at identical electrical parameters (3.3V, 120mA test current, 200mA maximum current). PSL0102WBEC1 provides higher color rendering index (CRI 90 vs. CRI 80) but lower luminous efficiency (75 lm/W vs. 95 lm/W). PSL0102WBEB1 delivers higher luminous flux at test current (38lm vs. 30lm).

Q: Why are the substitute parts listed as obsolete?

A: Both PSL0102WBEB1 and PSL0102WBEC1 are marked as obsolete products. Inventory availability may be limited. The XMLBWT-00-0000-000HT30Z5 is the active product and should be the primary selection.

Q: Are all three parts RoHS compliant?

A: Yes. The XMLBWT-00-0000-000HT30Z5 is RoHS Compliant. PSL0102WBEB1 and PSL0102WBEC1 are ROHS3 Compliant. All three parts are REACH Unaffected.

Q: What is the height difference between the main part and substitutes?

A: The XMLBWT-00-0000-000HT30Z5 has a maximum seated height of 0.124" (3.15mm), while both ROHM substitute parts have a maximum seated height of 0.039" (1.00mm). This significant height difference may affect PCB layout and clearance considerations.