LED XLAMP Warm White 3250K SMD XMLBWT-00-0000-000HT30F7 Equivalent & Substitute Parts

Part Overview

The XMLBWT-00-0000-000HT30F7 is a CreeLED XLamp® XM-L2 series warm white LED with a correlated color temperature of 3250K, designed for surface mount applications in the 2020 (5050 Metric) package. This component is currently active in production with 881 units in stock. Substitute parts may be required due to supply constraints, design revisions, or specific application requirements that demand alternative electrical or thermal characteristics.

Substiute Parts

XMLBWT-00-0000-000HT30F7

CreeLED, Inc.In Stock: 948XMLBWT-00-0000-000HT30F7 Datasheet

Current PartRFQ

XMLBWT-00-0000-000HT30E7

CreeLED, Inc.In Stock: 2171XMLBWT-00-0000-000HT30E7 Datasheet

Parametric EquivalentRFQ

PSL0102WBEB1

ROHM SemiconductorIn Stock: 2686PSL0102WBEB1 Datasheet

SimilarRFQ

PSL0102WBEC1

ROHM SemiconductorIn Stock: 1640PSL0102WBEC1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XMLBWT-00-0000-000HT30F7 is determined by the following critical parameters:

Parametric Equivalent Classification: Parts that maintain identical or functionally equivalent electrical characteristics within the same series (XLamp® XM-L2) and package form factor (2020/5050 Metric). Acceptable variations include correlated color temperature (CCT) within the warm white spectrum (2700K–4000K range) while maintaining forward voltage (2.72V typical), test current (700mA), maximum current rating (3A), and thermal resistance (2.5°C/W).

Similar Manufacturer Classification: Parts from alternative manufacturers that share the same package footprint (2020/5050 Metric) and surface mount mounting type but may differ in electrical performance, color temperature, current ratings, or thermal characteristics. These parts are suitable only when application requirements permit deviations in luminous flux, forward voltage, or operating current.

The XMLBWT-00-0000-000HT30F7 lists the following substitutes based on these criteria:

• XMLBWT-00-0000-000HT30E7 (Parametric Equivalent)
• PSL0102WBEC1 (Similar Manufacturer)
• PSL0102WBEB1 (Similar Manufacturer)

Parameter Comparison

Engineering Selection Recommendations

XMLBWT-00-0000-000HT30E7 (Parametric Equivalent): This part is the primary substitute for the XMLBWT-00-0000-000HT30F7. Both components are manufactured by CreeLED, Inc., belong to the XLamp® XM-L2 series, and share identical electrical specifications including forward voltage (2.72V), test current (700mA), maximum current (3A), and thermal resistance (2.5°C/W). The only difference is the correlated color temperature: 3000K versus 3250K. Both are RoHS Compliant and Active in production status. This substitute is suitable for applications where a slight shift toward cooler warm white tones is acceptable. Inventory availability is higher (2061 units) compared to the primary part.

PSL0102WBEB1 and PSL0102WBEC1 (Similar Manufacturer): These ROHM Semiconductor PSL0102 series components share the same 2020 (5050 Metric) package footprint and surface mount mounting type. However, they differ significantly in electrical performance: forward voltage is 3.3V (versus 2.72V), test current is 120mA (versus 700mA), and maximum current is 200mA (versus 3A). Both parts are classified as Obsolete and packaged in Cut Tape (CT) format rather than Tape & Reel. The PSL0102WBEB1 delivers 38lm at 25°C with 95 lm/W efficiency, while the PSL0102WBEC1 delivers 30lm at 25°C with 75 lm/W efficiency and a higher CRI of 90. Both operate at 5000K (cool white), representing a significant color temperature shift from the warm white primary part. These substitutes are suitable only for applications with substantially different power budgets and where cool white color temperature is acceptable. Both are ROHS3 Compliant.

Selection priority: Use XMLBWT-00-0000-000HT30E7 for direct functional replacement. Consider PSL0102 series parts only when application constraints require lower operating current, different color temperature, or when the primary and parametric equivalent parts are unavailable.

Frequently Asked Questions (FAQ)

Q: Can XMLBWT-00-0000-000HT30E7 be used as a direct replacement for XMLBWT-00-0000-000HT30F7?

A: Yes. Both parts are CreeLED XLamp® XM-L2 components with identical electrical specifications (2.72V forward voltage, 700mA test current, 3A maximum current, 2.5°C/W thermal resistance, 115 lm/W efficiency). The only difference is correlated color temperature: 3000K versus 3250K. Both are Active products with RoHS Compliance. This substitution requires only verification that the application tolerates a 250K shift toward cooler warm white tones.

Q: Why are PSL0102WBEB1 and PSL0102WBEC1 classified as similar rather than equivalent?

A: These ROHM Semiconductor parts differ substantially from the primary component in forward voltage (3.3V versus 2.72V), operating current (120mA versus 700mA), maximum current (200mA versus 3A), color temperature (5000K cool white versus 3250K warm white), and thermal characteristics. While they share the same 2020 (5050 Metric) package footprint, they require different circuit design and are suitable only for applications with fundamentally different power and color requirements.

Q: What is the impact of the 250K color temperature difference between XMLBWT-00-0000-000HT30F7 and XMLBWT-00-0000-000HT30E7?

A: The shift from 3250K to 3000K represents a move toward warmer tones. Both fall within the warm white spectrum and maintain identical CRI (80). Visual perception of this difference depends on application context and observer sensitivity. Applications requiring precise color matching should evaluate this shift against design specifications.

Q: Are the PSL0102 parts suitable for high-current applications?

A: No. The PSL0102WBEB1 and PSL0102WBEC1 are rated for maximum 200mA current, compared to 3A for the XMLBWT series. These parts are designed for low-power applications and cannot replace the primary component in circuits requiring 700mA or higher operating current.

Q: What is the significance of the packaging difference between Tape & Reel and Cut Tape formats?

A: Tape & Reel (TR) packaging is suitable for automated pick-and-place assembly processes. Cut Tape (CT) packaging is typically used for manual assembly or lower-volume applications. The PSL0102 parts are supplied in Cut Tape format, which may require different handling procedures and assembly equipment compared to the Tape & Reel format of the XMLBWT series.

Q: Why are PSL0102WBEB1 and PSL0102WBEC1 marked as Obsolete?

A: Obsolete status indicates these parts are no longer in active production. While inventory may be available from distributors, long-term supply cannot be guaranteed. For new designs or long-term production requirements, the Active status parts (XMLBWT-00-0000-000HT30F7 or XMLBWT-00-0000-000HT30E7) are recommended.

Q: What is the thermal resistance difference between the XMLBWT and PSL0102 series?

A: The XMLBWT series specifies 2.5°C/W thermal resistance. The PSL0102 series does not provide thermal resistance data. This parameter is critical for applications requiring thermal management calculations. The absence of this specification for PSL0102 parts indicates they are designed for lower-power operation where thermal management is less critical.