XMLAWT-02-0000-0000T5053 Equivalent & Substitute Parts

Part Overview

The XMLAWT-02-0000-0000T5053 is a CreeLED XLamp® XM-L cool white LED (6000K) in 2020 (5050 Metric) surface mount package. This part is classified as Obsolete. Finding equivalent and substitute parts is necessary due to product discontinuation and to ensure continued availability for new designs and production requirements.

Substiute Parts

XMLAWT-02-0000-0000T5053

CreeLED, Inc.In Stock: 1188XMLAWT-02-0000-0000T5053 Datasheet

Current PartRFQ

XMLBWT-02-0000-0000T5053

CreeLED, Inc.In Stock: 765XMLBWT-02-0000-0000T5053 Datasheet

DirectRFQ

XMLDWT-00-0000-0000U3051

CreeLED, Inc.In Stock: 936XMLDWT-00-0000-0000U3051 Datasheet

SimilarRFQ

XMLAWT-00-0000-0000T5053

CreeLED, Inc.In Stock: 888XMLAWT-00-0000-0000T5053 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

• Package / Case: 2020 (5050 Metric) surface mount form factor
• Color & CCT: White, Cool spectrum (6000K nominal)
• Test Current: 700mA nominal operation
• Maximum Current: 3A rating
• Mounting Type: Surface Mount
• Physical Dimensions: 0.197" L x 0.197" W (5.00mm x 5.00mm), Height 0.124" (3.15mm)
• Thermal Resistance: 2.5°C/W
• Compliance: RoHS Compliant, REACH Unaffected

Substitute parts are grouped into two categories:

Direct Manufacturer Substitute: XMLBWT-02-0000-0000T5053 (XLamp® XM-L2 series, Active status, same package and CCT)

Parametric Equivalent: XMLAWT-00-0000-0000T5053 (XLamp® XM-L series, identical electrical and thermal specifications, different packaging)

Similar Specification Alternative: XMLDWT-00-0000-0000U3051 (XLamp® XM-L2 series, Active status, same package, CCT variant at 6200K)

Parameter Comparison

Engineering Selection Recommendations

XMLBWT-02-0000-0000T5053 is the primary direct substitute. It maintains identical package geometry, CCT specification, test current, and thermal characteristics. The XLamp® XM-L2 series represents an active product line with improved efficiency (135 lm/W vs. 133 lm/W). Forward voltage is reduced from 2.9V to 2.72V, which may require circuit verification in current-limited designs. This part is RoHS Compliant and carries Active product status, ensuring long-term availability.

XMLAWT-00-0000-0000T5053 is a parametric equivalent within the same XLamp® XM-L series. All electrical and thermal specifications are identical to the main part. Packaging differs (Cut Tape & Digi-Reel® vs. Tape & Reel), which affects procurement and assembly logistics but not electrical performance. This part remains Obsolete, limiting future availability.

XMLDWT-00-0000-0000U3051 is a similar specification alternative with higher luminous flux (330lm vs. 270lm) at the same 700mA test current. CCT is shifted to 6200K, representing a cooler white spectrum. This part is Active and RoHS Compliant. Selection requires confirmation that the increased flux and CCT shift are acceptable for the application.

Frequently Asked Questions (FAQ)

Q: Can XMLBWT-02-0000-0000T5053 directly replace XMLAWT-02-0000-0000T5053 without circuit modification?

A: The parts share identical package, CCT, test current, and thermal specifications. Forward voltage differs (2.72V vs. 2.9V). In constant-current driver circuits, this difference is transparent. In voltage-regulated circuits, verify that the lower forward voltage does not cause excessive current draw or thermal stress.

Q: What is the significance of the XLamp® XM-L2 series upgrade in XMLBWT-02-0000-0000T5053?

A: The XM-L2 represents a newer generation with improved luminous efficacy (135 lm/W vs. 133 lm/W). All mechanical and thermal parameters remain compatible. The part is Active, ensuring continued manufacturing and supply.

Q: Why is XMLDWT-00-0000-0000U3051 listed as a similar alternative rather than a direct substitute?

A: While it maintains the same package and test current, the CCT specification differs (6200K vs. 6000K). The luminous flux is significantly higher (330lm vs. 270lm). These differences require application-level verification to confirm acceptability.

Q: Does packaging type (Tape & Reel vs. Cut Tape) affect electrical performance?

A: No. Packaging type affects procurement, storage, and assembly logistics only. Electrical and thermal performance is identical. XMLAWT-00-0000-0000T5053 (Cut Tape & Digi-Reel®) and XMLAWT-02-0000-0000T5053 (Tape & Reel) are electrically equivalent.

Q: Are all substitute parts RoHS Compliant?

A: Yes. XMLBWT-02-0000-0000T5053, XMLAWT-00-0000-0000T5053, and XMLDWT-00-0000-0000U3051 are all RoHS Compliant and REACH Unaffected.

Q: What is the impact of the main part being Obsolete?

A: Obsolete status indicates the manufacturer has discontinued active production. Existing inventory (1090 Pcs) is available, but long-term supply cannot be guaranteed. XMLBWT-02-0000-0000T5053 (Active status) is recommended for new designs to ensure sustained availability.