XMLAWT-00-0000-000HT30F7 Equivalent & Substitute Parts

Part Overview

The XMLAWT-00-0000-000HT30F7 is a CreeLED XLamp® XM-L warm white LED (3250K) in 2020 (5050 Metric) surface mount package. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing production and maintenance applications. The part delivers 230 lumens at 700mA test current with a forward voltage of 2.9V and 113 lm/W efficiency. Warm white color temperature (3250K) with 80 CRI makes it suitable for general illumination applications requiring warm-toned light output.

Substiute Parts

XMLAWT-00-0000-000HT30F7

CreeLED, Inc.In Stock: 1103XMLAWT-00-0000-000HT30F7 Datasheet

Current PartRFQ

XMLBWT-00-0000-000HT30F7

CreeLED, Inc.In Stock: 948XMLBWT-00-0000-000HT30F7 Datasheet

DirectRFQ

PSL0102WBEB1

ROHM SemiconductorIn Stock: 2686PSL0102WBEB1 Datasheet

SimilarRFQ

PSL0102WBEC1

ROHM SemiconductorIn Stock: 1640PSL0102WBEC1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following critical parameters:

• Color temperature (CCT): 3250K warm white
• Package / Case: 2020 (5050 Metric) surface mount
• Mounting type: Surface mount
• Physical dimensions: 5.00mm × 5.00mm footprint
• CRI: 80 or higher
• Thermal resistance: 2.5°C/W
• RoHS compliance status

The XMLBWT-00-0000-000HT30F7 (CreeLED XLamp® XM-L2) is a direct equivalent from the same manufacturer, maintaining identical color temperature, package, and thermal characteristics while offering improved efficiency (115 lm/W vs. 113 lm/W) and active product status.

The PSL0102WBEB1 and PSL0102WBEC1 (ROHM Semiconductor) are similar parts sharing the same 2020 package and surface mount configuration. However, these parts operate at 5000K (cool white) rather than 3250K (warm white), representing a different color temperature category. These are listed as similar alternatives only where color temperature flexibility exists in the application.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Recommended for 3250K Warm White Applications):

XMLBWT-00-0000-000HT30F7 is the primary substitute. Both parts maintain identical color temperature (3250K), package dimensions (2020/5050 Metric), thermal resistance (2.5°C/W), and CRI (80). The XMLBWT offers active product status versus the obsolete XMLAWT, ensuring long-term availability. Forward voltage is slightly lower (2.72V vs. 2.9V), resulting in marginally improved efficiency (115 lm/W vs. 113 lm/W). Both parts carry RoHS compliance and MSL 1 rating. This substitution requires no circuit redesign.

Alternative Parts (5000K Cool White Only):

PSL0102WBEB1 and PSL0102WBEC1 share the 2020 package footprint but operate at 5000K (cool white) instead of 3250K (warm white). These parts are suitable only where application requirements permit color temperature change. Both are obsolete products with ROHS3 compliance and MSL 3 rating. Significantly lower flux output (30–38 lm vs. 230 lm) and reduced maximum current (200mA vs. 3A) indicate these are lower-power alternatives. Height is substantially lower (1.00mm vs. 3.15mm), which may affect thermal management in high-current applications.

Frequently Asked Questions (FAQ)

Q: Can XMLBWT-00-0000-000HT30F7 be used as a direct replacement for XMLAWT-00-0000-000HT30F7?

A: Yes. Both parts share identical color temperature (3250K), package (2020/5050 Metric), thermal resistance (2.5°C/W), and CRI (80). The XMLBWT operates at slightly lower forward voltage (2.72V vs. 2.9V) and higher efficiency (115 lm/W vs. 113 lm/W). No circuit modifications are required.

Q: What is the key difference between the CreeLED XLamp® XM-L and XM-L2 series?

A: The XM-L2 (XMLBWT) represents an improved generation with higher lumens-per-watt efficiency and lower forward voltage while maintaining the same color temperature, package, and thermal characteristics. The XM-L (XMLAWT) is obsolete; the XM-L2 is active.

Q: Are PSL0102 parts suitable replacements?

A: PSL0102 parts are not direct replacements. They operate at 5000K (cool white) versus 3250K (warm white), produce significantly lower flux (30–38 lm vs. 230 lm), and support lower maximum current (200mA vs. 3A). Use only if application requirements permit cool white color temperature and lower light output.

Q: What are the packaging differences between these parts?

A: All four parts use the 2020 (5050 Metric) surface mount package with 5.00mm × 5.00mm footprint. CreeLED parts (XMLAWT, XMLBWT) have 3.15mm maximum height; ROHM PSL0102 parts have 1.00mm maximum height. The lower profile of PSL0102 parts may affect thermal dissipation in high-current applications.

Q: What is the moisture sensitivity level (MSL) difference?

A: XMLAWT and XMLBWT carry MSL 1 (unlimited shelf life without desiccant). PSL0102 parts carry MSL 3 (168-hour maximum exposure to 85°C/85% RH before reflow). MSL 1 parts offer superior storage flexibility.

Q: Are all parts RoHS compliant?

A: Yes. XMLAWT and XMLBWT are RoHS Compliant. PSL0102 parts are ROHS3 Compliant. Both certifications meet current regulatory requirements.