XMLAWT-00-0000-000HT30F6 Equivalent & Substitute Parts

Part Overview

The XMLAWT-00-0000-000HT30F6 is a CreeLED XLamp® XM-L warm white LED (3750K) in 2020 (5050 Metric) surface mount package. This part is classified as obsolete, making equivalent and substitute parts necessary for ongoing production and maintenance applications. The part delivers 230 lumens at 700mA test current with a forward voltage of 2.9V and 113 lm/W efficiency. Warm white 3750K color temperature with 80 CRI makes this suitable for general illumination applications requiring warm-toned light output.

Substiute Parts

XMLAWT-00-0000-000HT30F6

CreeLED, Inc.In Stock: 1094XMLAWT-00-0000-000HT30F6 Datasheet

Current PartRFQ

XMLBWT-00-0000-000HT30F6

CreeLED, Inc.In Stock: 906XMLBWT-00-0000-000HT30F6 Datasheet

DirectRFQ

PSL0102WBEB1

ROHM SemiconductorIn Stock: 2686PSL0102WBEB1 Datasheet

SimilarRFQ

PSL0102WBEC1

ROHM SemiconductorIn Stock: 1640PSL0102WBEC1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the XMLAWT-00-0000-000HT30F6 is determined by the following critical parameters:

Primary Substitution Criteria:

• Color temperature: 3750K warm white
• Package / Case: 2020 (5050 Metric) surface mount
• Mounting type: Surface mount
• Physical dimensions: 5.00mm x 5.00mm footprint
• Thermal resistance: 2.5°C/W
• RoHS compliance status

Direct Equivalent: XMLBWT-00-0000-000HT30F6 (CreeLED XLamp® XM-L2) meets all primary substitution criteria. This part maintains identical color temperature (3750K), package dimensions, mounting type, and thermal characteristics. The XM-L2 is an active product with improved efficiency (115 lm/W vs. 113 lm/W) and slightly lower forward voltage (2.72V vs. 2.9V).

Similar Substitutes: PSL0102WBEB1 and PSL0102WBEC1 (ROHM Semiconductor PSL0102 series) share the same 2020 (5050 Metric) package and surface mount configuration. However, these parts operate at 5000K (cool white) rather than 3750K (warm white), representing a different color temperature category. These are classified as similar substitutes due to package compatibility but with color temperature deviation.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Preferred): XMLBWT-00-0000-000HT30F6 is the recommended direct substitute. This part maintains all critical electrical and mechanical parameters including 3750K color temperature, 2020 (5050 Metric) package, 2.5°C/W thermal resistance, and unlimited moisture sensitivity level (MSL 1). The XMLBWT is an active product with RoHS compliance, providing supply continuity and improved efficiency characteristics compared to the obsolete XMLAWT.

For Alternative Applications (With Design Considerations): PSL0102WBEB1 and PSL0102WBEC1 are compatible from a mechanical and mounting perspective but operate at 5000K (cool white) instead of 3750K (warm white). These parts are suitable only for applications where cool white color temperature is acceptable. Both ROHM parts are obsolete products. PSL0102WBEB1 delivers 38 lumens at 120mA with 95 lm/W efficiency, while PSL0102WBEC1 delivers 30 lumens at 120mA with 75 lm/W efficiency and higher CRI (90). The ROHM parts operate at significantly lower current (120mA vs. 700mA) and deliver proportionally lower luminous flux, making them suitable only for low-power applications.

Compliance Considerations: All substitute parts maintain RoHS compliance. The XMLBWT-00-0000-000HT30F6 matches the MSL 1 rating of the original part, while ROHM PSL0102 variants are rated MSL 3, requiring stricter moisture control during storage and handling.

Frequently Asked Questions (FAQ)

Q: Can XMLBWT-00-0000-000HT30F6 be used as a direct replacement for XMLAWT-00-0000-000HT30F6? A: Yes. Both parts share identical color temperature (3750K), package dimensions (2020 / 5050 Metric), thermal resistance (2.5°C/W), and electrical operating parameters at 700mA test current. The XMLBWT is an active product, providing supply continuity for the obsolete XMLAWT.

Q: What are the key differences between XMLAWT and XMLBWT? A: The XMLBWT (XM-L2 generation) has a lower forward voltage (2.72V vs. 2.9V) and slightly higher efficiency (115 lm/W vs. 113 lm/W). Both deliver 230 lumens at 700mA. The XMLBWT is an active product while XMLAWT is obsolete.

Q: Can PSL0102 parts replace the XMLAWT in all applications? A: No. PSL0102 parts operate at 5000K (cool white) instead of 3750K (warm white), making them unsuitable for applications requiring warm white color temperature. Additionally, PSL0102 parts operate at 120mA with significantly lower luminous output (30-38 lumens) compared to XMLAWT at 700mA (230 lumens). PSL0102 is suitable only for low-power applications where cool white color temperature is acceptable.

Q: Are there package compatibility concerns when substituting? A: XMLBWT-00-0000-000HT30F6 is fully compatible with existing XMLAWT footprints. Both use 2020 (5050 Metric) surface mount packages with identical 5.00mm x 5.00mm dimensions and 3.15mm seated height. PSL0102 parts use the same footprint but have a lower seated height (1.00mm), which may require PCB layout verification for clearance in confined spaces.

Q: What moisture sensitivity level differences exist? A: XMLAWT and XMLBWT are rated MSL 1 (unlimited moisture sensitivity), allowing indefinite storage without desiccant. PSL0102 parts are rated MSL 3 (168 hours), requiring desiccant storage and limiting shelf life to 168 hours after bag opening under specified humidity conditions.

Q: Do all substitute parts meet RoHS compliance? A: Yes. XMLAWT, XMLBWT, and both PSL0102 variants are RoHS compliant. XMLAWT and XMLBWT are RoHS Compliant, while PSL0102 parts are ROHS3 Compliant.