XLS.M22.GLAA Equivalent & Substitute Parts

Part Overview

The XLS.M22.GLAA is a 22-position circular connector receptacle with male pins, manufactured by LEMO. This component features solder cup termination, panel mount configuration with bulkhead rear side nut fastening, and gold-plated mating contacts. The part operates across an industrial temperature range of -50°C to 170°C and is rated for 2A current capacity with IP50 dust protection.

The XLS.M22.GLAA is classified as obsolete. Identifying equivalent substitute parts ensures design continuity and supply chain reliability for applications requiring 22-position circular connector receptacles with identical electrical and mechanical specifications.

Substiute Parts

XLS.M22.GLAA

LEMOIn Stock: 921XLS.M22.GLAA Datasheet

Current PartRFQ

SLS.M22.GLAA

LEMOIn Stock: 976SLS.M22.GLAA Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XLS.M22.GLAA are identified based on strict equivalence across the following critical parameters:

• Connector type and pin configuration (Receptacle, Male Pins, 22 positions)
• Shell size and insert designation (M22)
• Mounting configuration (Panel Mount, Bulkhead - Rear Side Nut)
• Termination method (Solder Cup)
• Fastening mechanism (Push-Pull)
• Electrical ratings (2A current, gold-plated mating contacts)
• Environmental specifications (IP50 ingress protection, -50°C ~ 170°C operating range)
• Material composition (PEEK insert, Sulfone shell)
• Regulatory compliance (ROHS3 Compliant, REACH Unaffected)

The SLS.M22.GLAA meets all these criteria and qualifies as a direct substitute for the obsolete XLS.M22.GLAA.

Parameter Comparison

Engineering Selection Recommendations

The SLS.M22.GLAA is the direct substitute for the obsolete XLS.M22.GLAA. Both parts are manufactured by LEMO and maintain identical electrical, mechanical, and environmental specifications. The substitute part is currently in active production status, ensuring long-term supply availability.

Both parts comply with ROHS3 regulations and carry REACH Unaffected status, meeting current environmental and regulatory requirements. The substitute part carries Moisture Sensitivity Level (MSL) 1 (Unlimited), indicating superior moisture handling characteristics compared to the main part's Not Applicable designation.

Selection of the SLS.M22.GLAA eliminates obsolescence risk while maintaining full functional and physical compatibility with existing designs utilizing the XLS.M22.GLAA.

Frequently Asked Questions (FAQ)

Q: Are the XLS.M22.GLAA and SLS.M22.GLAA mechanically interchangeable?

A: Yes. Both parts share identical shell size (M22), mounting configuration (panel mount with bulkhead rear side nut), and fastening mechanism (push-pull). Physical dimensions and mounting footprints are equivalent.

Q: Do these parts have the same electrical ratings?

A: Yes. Both parts are rated for 2A current capacity with gold-plated mating contacts, unshielded configuration, and operate across the identical temperature range of -50°C to 170°C.

Q: What is the difference between the XLS.M22.GLAA and SLS.M22.GLAA?

A: The primary difference is product status. The XLS.M22.GLAA is obsolete, while the SLS.M22.GLAA is active production. The substitute part also specifies MSL 1 (Unlimited) moisture sensitivity, whereas the main part lists Not Applicable. All other specifications are identical.

Q: Can I use the SLS.M22.GLAA as a direct replacement in existing designs?

A: Yes. The SLS.M22.GLAA provides full functional and physical compatibility with the XLS.M22.GLAA across all specified parameters, including connector type, pin count, shell size, termination method, and electrical ratings.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both the XLS.M22.GLAA and SLS.M22.GLAA are ROHS3 Compliant and REACH Unaffected, meeting current environmental regulations.

Q: What applications are these connectors suitable for?

A: The XLS.M22.GLAA is specified for industrial, medical, and testing equipment applications. The SLS.M22.GLAA extends application coverage to include automotive environments while maintaining all other application categories.