XLL536200.000000I Equivalent & Substitute Parts

Part Overview

The XLL536200.000000I is a 200 MHz XO (Standard) LVDS Oscillator manufactured by Renesas Electronics Corporation. This component operates at 3.3V with Enable/Disable functionality in a 6-SMD, No Lead surface mount package. The part is Active status and widely used in applications requiring precision frequency generation with LVDS output signaling. Substitute parts are identified when equivalent electrical specifications and mechanical compatibility are maintained across the allowed parameter set.

Substiute Parts

XLL536200.000000I

Renesas Electronics CorporationIn Stock: 753XLL536200.000000I Datasheet

Current PartRFQ

510BBA200M000BAG

Skyworks Solutions Inc.In Stock: 1496510BBA200M000BAG Datasheet

DirectRFQ

511BBA200M000BAG

Skyworks Solutions Inc.In Stock: 23590511BBA200M000BAG Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XLL536200.000000I are qualified based on the following criteria:

• Frequency: 200 MHz (exact match required)
• Output: LVDS (exact match required)
• Supply Voltage: 3.3V (exact match required)
• Function: Enable/Disable (exact match required)
• Frequency Stability: ±25ppm (exact match required)
• Operating Temperature: -40°C ~ 85°C (exact match required)
• Package: 6-SMD, No Lead (exact match required)
• Mounting Type: Surface Mount (exact match required)
• RoHS Status: ROHS3 Compliant (compliance requirement)
• Moisture Sensitivity Level: 1 (Unlimited) (handling requirement)

The two identified substitutes—510BBA200M000BAG (Skyworks Si510 series) and 511BBA200M000BAG (Skyworks Si511 series)—meet all electrical and mechanical parameters. Both are manufactured by Skyworks Solutions Inc., maintain Active product status, and satisfy all regulatory compliance requirements.

Parameter Comparison

Engineering Selection Recommendations

All three oscillators meet the core electrical and mechanical requirements for 200 MHz LVDS operation at 3.3V with Enable/Disable functionality. Selection between the Renesas XLL536200.000000I and the Skyworks alternatives (510BBA200M000BAG or 511BBA200M000BAG) depends on supply chain availability and design constraints.

The Skyworks Si510 and Si511 substitutes offer lower maximum supply current (23mA vs. 100mA) and reduced physical dimensions, which may provide advantages in power-constrained or space-limited applications. Both Skyworks parts maintain identical electrical specifications and regulatory compliance (ROHS3, REACH Unaffected, EAR99 classification).

All parts are Active status products with unlimited moisture sensitivity handling (MSL 1), ensuring long-term availability and standard storage conditions.

Frequently Asked Questions (FAQ)

Q: Can 510BBA200M000BAG and 511BBA200M000BAG be used interchangeably with XLL536200.000000I?

A: Yes. Both Skyworks parts meet all specified electrical parameters (200 MHz, LVDS output, 3.3V supply, ±25ppm stability, -40°C to 85°C operation) and mechanical requirements (6-SMD No Lead package, surface mount). Physical dimensions are slightly smaller, and supply current is lower, but these differences do not prevent direct substitution in applications designed for the Renesas part.

Q: What are the key differences between the Skyworks Si510 and Si511 series?

A: The 510BBA200M000BAG (Si510) and 511BBA200M000BAG (Si511) are electrically identical for this 200 MHz LVDS configuration. Both deliver 23mA maximum supply current and 18mA disable current. The primary distinction is series designation and inventory availability (Si511 has significantly higher stock levels).

Q: Are there any package compatibility concerns?

A: The substitute parts use the same 6-SMD, No Lead package type. Skyworks parts are slightly smaller (5.00mm x 3.20mm vs. 5.15mm x 3.35mm) and lower profile (1.28mm vs. 1.40mm seated height). These dimensional differences are within typical PCB layout tolerances and do not require design modifications.

Q: Do all parts meet the same compliance standards?

A: Yes. XLL536200.000000I, 510BBA200M000BAG, and 511BBA200M000BAG are all ROHS3 Compliant, REACH Unaffected, and classified as EAR99 for export control purposes. All carry MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the supply current difference, and does it matter?

A: The Renesas part specifies 100mA maximum supply current, while both Skyworks substitutes specify 23mA. This represents a significant reduction in active power consumption. Applications with strict power budgets may benefit from the Skyworks alternatives. Disable current is specified only for Skyworks parts (18mA), providing additional power management capability.