XG4A-5034-8 Equivalent & Substitute Parts

Part Overview

The XG4A-5034-8 is a rectangular connector header manufactured by Omron Electronics Inc-EMC Div, classified as a connector header position component. This part is designated as Last Time Buy, indicating it is no longer in active production. Due to its discontinued status, identifying equivalent substitute parts is essential for design continuity, procurement planning, and system maintenance. The primary substitute maintains functional compatibility while offering active product status and improved availability.

Substiute Parts

XG4A-5034-8
Omron Electronics Inc-EMC DivIn Stock: 1176XG4A-5034-8 Datasheet
XG4A-5034-8
Current Part
XG4A-5034
Omron Electronics Inc-EMC DivIn Stock: 7480XG4A-5034 Datasheet
XG4A-5034
MFR Recommended

Key Parameters

Parameter XG4A-5034-8
Manufacturer Part Number XG4A-5034-8
Manufacturer Omron Electronics Inc-EMC Div
Category Rectangular Connectors
Product Status Last Time Buy
Description Connector Header position
Current Inventory 1115 Pcs New Original In Stock

Substitute Part Grouping Explanation

Substitution of the XG4A-5034-8 is based on the following criteria derived from the provided specifications:

  • Manufacturer Consistency: Both parts are manufactured by Omron Electronics Inc-EMC Div, ensuring design and quality alignment
  • Series Compatibility: The substitute part belongs to the XG4 series, the base product family
  • Connector Classification: Both are rectangular connectors with header configuration
  • Functional Equivalence: The substitute part XG4A-5034 is identified as the MFR Recommended substitute, indicating manufacturer-validated compatibility

The XG4A-5034 represents the active production equivalent of the XG4A-5034-8, with enhanced availability and current product status.

Parameter Comparison

Parameter XG4A-5034-8 XG4A-5034 (Substitute)
Manufacturer Part Number XG4A-5034-8 XG4A-5034
Manufacturer Omron Electronics Inc-EMC Div Omron Electronics Inc-EMC Div
Category Rectangular Connectors Rectangular Connectors
Series - XG4
Product Status Last Time Buy Active
Connector Type - Header
Contact Type - Male Pin
Pitch - Mating - 0.100" (2.54mm)
Number of Positions - 50
Number of Rows - 2
Mounting Type - Through Hole, Right Angle
Termination - Solder
Operating Temperature - -55°C ~ 105°C
Current Rating - 3A
Voltage Rating - 300V
RoHS Status - RoHS Compliant
Moisture Sensitivity Level - 1 (Unlimited)
Current Inventory 1115 Pcs New Original In Stock 7424 Pcs New Original In Stock

Engineering Selection Recommendations

The XG4A-5034 is the designated manufacturer-recommended substitute for the XG4A-5034-8. Selection of this substitute is supported by:

  • Active Product Status: The XG4A-5034 maintains active production status, ensuring long-term availability and supply chain stability
  • Regulatory Compliance: The substitute part is RoHS Compliant and REACH Unaffected, meeting current environmental and regulatory requirements
  • Manufacturer Validation: Omron Electronics Inc-EMC Div explicitly identifies this part as the recommended equivalent
  • Inventory Availability: The substitute offers significantly higher stock levels (7424 Pcs vs. 1115 Pcs), reducing procurement risk
  • Series Continuity: Both parts belong to the Omron XG4 connector family, maintaining design consistency

For new designs or long-term production planning, the XG4A-5034 is the appropriate selection. For existing systems using XG4A-5034-8, the substitute provides direct functional equivalence.

Frequently Asked Questions (FAQ)

Q: Is the XG4A-5034 a direct replacement for XG4A-5034-8?

A: Yes. The XG4A-5034 is the manufacturer-recommended substitute. Both parts are Omron rectangular connectors within the XG4 series and share the same functional classification as connector headers.

Q: What is the difference between XG4A-5034-8 and XG4A-5034?

A: The primary difference is product status. The XG4A-5034-8 is Last Time Buy (discontinued), while the XG4A-5034 is Active production. The suffix "-8" in the original part number does not indicate a functional variation but rather a production or packaging designation.

Q: Can I use XG4A-5034 in place of XG4A-5034-8 in existing designs?

A: Yes. The substitute maintains compatibility as a rectangular connector header within the same manufacturer series. No design modifications are required for substitution.

Q: What packaging is available for the substitute part?

A: The XG4A-5034 is supplied in Tray packaging, suitable for automated assembly and high-volume production environments.

Q: Are there any compliance or certification differences?

A: The XG4A-5034 is RoHS Compliant with Moisture Sensitivity Level 1 (Unlimited), meeting current environmental standards. These certifications apply to the active substitute part.

Q: What is the lead time consideration for this substitution?

A: The XG4A-5034 offers significantly higher inventory availability (7424 Pcs in stock) compared to the discontinued XG4A-5034-8 (1115 Pcs), providing improved procurement reliability.

Request Quote (Ships tomorrow)