XG4A-2634-8 Equivalent & Substitute Parts

Part Overview

The XG4A-2634-8 is a rectangular connector header manufactured by Omron Electronics Inc-EMC Div, classified as a connector component for board-to-cable/wire applications. This part is designated as Last Time Buy, indicating it has reached end-of-life status and is no longer in active production. Finding equivalent substitute parts is necessary to ensure continued availability for new designs, maintenance, and production continuity.

Substiute Parts

XG4A-2634-8

Omron Electronics Inc-EMC DivIn Stock: 1104XG4A-2634-8 Datasheet

Current PartRFQ

XG4A-2634

Omron Electronics Inc-EMC DivIn Stock: 1318XG4A-2634 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the XG4A-2634-8 is based on the following critical parameters derived from the Omron XG4 series specifications:

• Connector Type: Header
• Contact Type: Male Pin
• Pitch - Mating: 0.100" (2.54mm)
• Number of Positions: 26
• Number of Rows: 2
• Row Spacing - Mating: 0.100" (2.54mm)
• Mounting Type: Through Hole, Right Angle
• Shrouding: Shrouded - 4 Wall
• Termination: Solder
• Operating Temperature Range: -55°C ~ 105°C
• Voltage Rating: 300V
• Current Rating: 3A
• RoHS Status: RoHS Compliant

The XG4A-2634 is identified as the manufacturer-recommended substitute, maintaining identical electrical and mechanical specifications within the XG4 series platform.

Parameter Comparison

Engineering Selection Recommendations

The XG4A-2634 is the direct substitute for the XG4A-2634-8. Both parts maintain identical electrical and mechanical specifications, including connector geometry, contact configuration, pitch, position count, and operating parameters. The substitute part carries Active product status, ensuring long-term availability and continued manufacturing support. Both parts are RoHS Compliant and carry equivalent compliance certifications. The XG4A-2634 is available in higher inventory quantity (1292 Pcs) compared to the Last Time Buy XG4A-2634-8 (1071 Pcs), providing improved supply chain security for new production and design transitions.

Frequently Asked Questions (FAQ)

Q: What is the difference between XG4A-2634-8 and XG4A-2634?

A: Both parts are functionally identical rectangular connectors within the Omron XG4 series. The primary difference is product status: XG4A-2634-8 is Last Time Buy (end-of-life), while XG4A-2634 is Active (current production). All electrical and mechanical parameters are equivalent.

Q: Can XG4A-2634 be used as a direct replacement for XG4A-2634-8?

A: Yes. The XG4A-2634 is the manufacturer-recommended substitute. It maintains identical specifications for connector type, contact configuration, pitch (0.100" / 2.54mm), position count (26), row spacing, mounting type (Through Hole, Right Angle), shrouding (Shrouded - 4 Wall), and operating parameters (-55°C ~ 105°C, 300V, 3A).

Q: Are there packaging differences between these parts?

A: The XG4A-2634 is packaged in Tray format. Packaging specifications for XG4A-2634-8 were not provided in the available data.

Q: What compliance certifications apply to both parts?

A: Both parts are RoHS Compliant, carry UL94 V-0 material flammability rating, and are REACH Unaffected. Both maintain Moisture Sensitivity Level (MSL) 1 (Unlimited).

Q: Which part should be selected for new designs?

A: The XG4A-2634 should be selected for new designs due to its Active product status and assured long-term availability. The XG4A-2634-8 should be reserved for legacy system maintenance only.