XG-2102CA 100.0000M-LGPAL0 Equivalent & Substitute Parts

Part Overview

The XG-2102CA 100.0000M-LGPAL0 is a 100 MHz SO (SAW) LVDS oscillator manufactured by EPSON, designed for applications requiring precision frequency generation with LVDS output. This part operates at 3.3V supply voltage with Enable/Disable functionality and is housed in a 6-SMD, No Lead package. The product maintains Active status with full RoHS3 compliance and REACH unaffected certification. Substitute parts are identified to address inventory availability, alternative voltage requirements, or specific packaging revision needs while maintaining electrical and mechanical compatibility.

Substiute Parts

XG-2102CA 100.0000M-LGPAL0

EPSONIn Stock: 1144XG-2102CA 100.0000M-LGPAL0 Datasheet

Current PartRFQ

EG-2121CA 100.0000M-LGPAL3

EPSONIn Stock: 1695EG-2121CA 100.0000M-LGPAL3 Datasheet

SimilarRFQ

XG-2102CA 100.0000M-LGPAL3

EPSONIn Stock: 1709XG-2102CA 100.0000M-LGPAL3 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XG-2102CA 100.0000M-LGPAL0 are identified based on the following critical parameters that determine functional and mechanical compatibility:

Primary Compatibility Criteria:

• Frequency: 100 MHz (exact match required)
• Output Type: LVDS (exact match required)
• Package Type: 6-SMD, No Lead (exact match required)
• Package Dimensions: 7.00mm x 5.00mm (exact match required)
• Function: Enable/Disable (exact match required)
• Frequency Stability: ±50ppm (exact match required)
• Operating Temperature: 0°C ~ 70°C (exact match required)
• Mounting Type: Surface Mount (exact match required)

Secondary Compatibility Criteria (Allowable Variations):

• Supply Voltage: 3.3V or 2.5V (voltage-dependent substitution)
• Maximum Supply Current: 30mA (main part) or 30mA (substitute)
• Disable Mode Current: 15mA (main part) or 20mA (substitute)
• Packaging Revision: LGPAL0 or LGPAL3 variants

Parameter Comparison

Engineering Selection Recommendations

XG-2102CA 100.0000M-LGPAL3 (Parametric Equivalent)

This part is a direct parametric equivalent to the main part, differing only in packaging revision (LGPAL3 versus LGPAL0). All electrical specifications, frequency characteristics, supply voltage, and thermal operating range are identical. This substitute is suitable for applications where packaging revision compatibility is not a constraint. Both parts maintain Active product status with identical RoHS3 and REACH compliance certifications.

EG-2121CA 100.0000M-LGPAL3 (Voltage-Dependent Substitute)

This part shares identical frequency, output type, package dimensions, and functional characteristics with the main part. The primary difference is the reduced supply voltage requirement of 2.5V compared to the 3.3V specification of the main part. This substitute is applicable only in circuit designs where the 2.5V supply voltage is compatible with system requirements. The disable mode current specification is 20mA versus 15mA for the main part. Both parts maintain Active product status with identical RoHS3 and REACH compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can the EG-2121CA 100.0000M-LGPAL3 be used as a direct replacement for the XG-2102CA 100.0000M-LGPAL0?

A: The EG-2121CA operates at 2.5V supply voltage while the main part requires 3.3V. Direct substitution is possible only if the circuit design supports 2.5V operation. All other electrical and mechanical parameters are compatible.

Q: What is the difference between the XG-2102CA 100.0000M-LGPAL0 and XG-2102CA 100.0000M-LGPAL3?

A: These parts are parametrically identical. The difference is the packaging revision designation (LGPAL0 versus LGPAL3). Both parts meet the same electrical specifications and physical dimensions.

Q: Are all substitute parts in the same physical package?

A: Yes. All listed parts use the 6-SMD, No Lead package with identical dimensions of 7.00mm x 5.00mm and maximum height of 1.40mm. They are mechanically interchangeable on the PCB.

Q: Do all substitute parts have the same frequency stability?

A: Yes. All parts listed maintain ±50ppm frequency stability across the 0°C to 70°C operating temperature range.

Q: Are there any compliance differences between the main part and substitutes?

A: No. All parts are ROHS3 compliant, REACH unaffected, and maintain MSL 1 (Unlimited) moisture sensitivity level. All parts carry Active product status.

Q: What is the maximum current consumption difference between parts?

A: The main part and XG-2102CA 100.0000M-LGPAL3 both draw 30mA maximum supply current with 15mA in disable mode. The EG-2121CA draws 30mA maximum supply current with 20mA in disable mode, a 5mA difference in disable mode operation.