XC6701B852PR-G Equivalent & Substitute Parts

Part Overview

The XC6701B852PR-G is an active linear voltage regulator IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This device functions as a positive fixed output regulator delivering 150mA at 8.5V with integrated over-current and over-temperature protection. The regulator operates across an input voltage range up to 28V and is housed in a SOT-89-5 surface mount package.

Finding equivalent and substitute parts for the XC6701B852PR-G is necessary to address supply chain continuity, inventory optimization, and design flexibility while maintaining electrical and mechanical compatibility within the specified application parameters.

Substiute Parts

XC6701B852PR-G

Torex Semiconductor LtdIn Stock: 868XC6701B852PR-G Datasheet

Current PartRFQ

XC6216B852PR-G

Torex Semiconductor LtdIn Stock: 1098XC6216B852PR-G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6701B852PR-G are identified based on strict parametric equivalence across the following critical specifications:

Electrical Compatibility Criteria:

• Fixed output voltage of 8.5V
• Maximum output current of 150mA
• Maximum input voltage of 28V
• Voltage dropout of 0.95V @ 100mA
• Operating temperature range of -40°C to 85°C
• Integrated over-current and over-temperature protection

Mechanical Compatibility Criteria:

• SOT-89-5 surface mount package
• Tape & Reel (TR) packaging format

Compliance Criteria:

• ROHS3 compliance
• Active product status
• Moisture Sensitivity Level (MSL) of 1

The XC6216B852PR-G qualifies as a parametric equivalent substitute, meeting all electrical and mechanical requirements while maintaining identical output voltage, current rating, input voltage tolerance, dropout voltage, temperature range, protection features, package type, and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the XC6701B852PR-G and XC6216B852PR-G are active products manufactured by Torex Semiconductor Ltd with full ROHS3 compliance and identical electrical and mechanical specifications for the primary application parameters.

The XC6216B852PR-G substitute part demonstrates lower quiescent current consumption (9 µA versus 115 µA), which provides improved power efficiency in standby or low-power operating modes. This characteristic makes the XC6216B852PR-G advantageous for battery-powered or energy-conscious applications where standby current is a design consideration.

The XC6701B852PR-G maintains higher power supply rejection ratio (PSRR) at 50dB (1kHz) compared to the substitute's 30dB (1kHz), which provides superior noise rejection in applications with high-frequency input noise or ripple.

Both parts are suitable for direct substitution in applications where the primary requirements are fixed 8.5V output at 150mA with SOT-89-5 surface mount packaging. Selection between these parts should be based on specific application requirements regarding quiescent current performance or noise rejection characteristics.

Frequently Asked Questions (FAQ)

Q: Can the XC6216B852PR-G directly replace the XC6701B852PR-G in existing designs?

A: Yes. Both parts share identical output voltage (8.5V), output current (150mA), input voltage rating (28V), dropout voltage (0.95V @ 100mA), operating temperature range (-40°C to 85°C), SOT-89-5 package, and protection features. Pin-to-pin compatibility and electrical performance for primary application parameters are maintained.

Q: What are the differences between these two parts?

A: The primary differences are quiescent current and power supply rejection ratio. The XC6216B852PR-G operates with 9 µA quiescent current compared to 115 µA for the XC6701B852PR-G, resulting in lower standby power consumption. The XC6701B852PR-G provides 50dB PSRR at 1kHz versus 30dB for the XC6216B852PR-G, offering superior input noise rejection.

Q: Are both parts available in the same packaging format?

A: Yes. Both the XC6701B852PR-G and XC6216B852PR-G are supplied in Tape & Reel (TR) format with SOT-89-5 surface mount package configuration, ensuring identical PCB assembly compatibility.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant with Moisture Sensitivity Level (MSL) of 1 (Unlimited), REACH Unaffected status, and identical ECCN and HTSUS classifications.

Q: Which part should be selected for low-power applications?

A: The XC6216B852PR-G is the appropriate selection for applications prioritizing low quiescent current consumption, as it operates at 9 µA compared to 115 µA for the XC6701B852PR-G. This difference is significant in battery-powered or always-on standby scenarios.

Q: Which part should be selected for high-noise environments?

A: The XC6701B852PR-G is the appropriate selection for applications requiring superior noise rejection, as it provides 50dB PSRR at 1kHz compared to 30dB for the XC6216B852PR-G. This higher rejection ratio is beneficial in systems with significant input voltage ripple or high-frequency noise.