XC6501C30B0R-G Equivalent & Substitute Parts

Part Overview

The XC6501C30B0R-G is a linear voltage regulator IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This device delivers a fixed positive output of 3.05V at 200mA with a maximum dropout voltage of 0.36V, designed for surface mount applications in the WLP-4-01 package. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified to provide design flexibility, inventory alternatives, and continuity of supply for applications requiring identical electrical and mechanical specifications.

Substiute Parts

XC6501C30B0R-G

Torex Semiconductor LtdIn Stock: 1154XC6501C30B0R-G Datasheet

Current PartRFQ

XC6501D30B0R-G

Torex Semiconductor LtdIn Stock: 1176XC6501D30B0R-G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6501C30B0R-G are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

• Output voltage configuration: Positive, fixed 3.05V
• Output current rating: 200mA
• Maximum input voltage: 6V
• Dropout voltage specification: 0.36V @ 200mA
• Quiescent current: 20 µA
• Power supply rejection ratio: 50dB (1kHz)
• Package and pinout: 4-XFBGA, WLBGA (WLP-4-01)
• Operating temperature range: -40°C ~ 85°C
• Control and protection features: Enable control with Over Current protection
• Compliance certifications: ROHS3, REACH Unaffected, MSL 1

Only parts meeting all these criteria are classified as direct substitutes. Variations in any of these parameters disqualify a part from this equivalence group.

Parameter Comparison

Engineering Selection Recommendations

Both the XC6501C30B0R-G and XC6501D30B0R-G are active production parts from Torex Semiconductor Ltd with identical electrical specifications and package configurations. Selection between these parts is based on availability and supply chain considerations rather than functional differences.

The XC6501C30B0R-G variant is suitable for applications requiring the C-grade device designation. The XC6501D30B0R-G variant is suitable for applications requiring the D-grade device designation. Both parts maintain full compliance with ROHS3 and REACH requirements, with unlimited moisture sensitivity rating (MSL 1) suitable for standard storage and handling conditions.

For applications where either variant is acceptable, selection should be based on current inventory availability and procurement lead times. Both parts are qualified for the same operating temperature range (-40°C ~ 85°C) and deliver identical performance in 3.05V, 200mA linear regulation applications.

Frequently Asked Questions (FAQ)

Q: Can XC6501D30B0R-G be used as a direct replacement for XC6501C30B0R-G?

A: Yes. Both parts are parametrically equivalent across all electrical specifications, output voltage, current rating, dropout voltage, quiescent current, PSRR, and package configuration. The difference between C-grade and D-grade designations does not affect functional performance in this product line.

Q: Are the package dimensions and pinout identical between these parts?

A: Yes. Both parts use the 4-XFBGA, WLBGA package type with WLP-4-01 supplier device package designation. Pinout and physical dimensions are identical, allowing direct PCB layout compatibility.

Q: What is the significance of the C and D grade designations?

A: The C and D designations represent different manufacturing batches or quality grades from Torex Semiconductor Ltd. Both grades meet identical electrical specifications and compliance requirements for this linear regulator series.

Q: Are there any temperature or environmental differences between these substitutes?

A: No. Both parts operate across the identical temperature range of -40°C ~ 85°C (TA) and carry the same moisture sensitivity level (MSL 1), indicating unlimited shelf life under standard storage conditions.

Q: Can these parts be used interchangeably in production?

A: Yes. Both parts are active production components with identical specifications, compliance certifications (ROHS3, REACH Unaffected), and performance characteristics. They are suitable for interchangeable use in manufacturing environments.

Q: What compliance certifications apply to both parts?

A: Both the XC6501C30B0R-G and XC6501D30B0R-G are ROHS3 compliant, REACH unaffected, and carry ECCN EAR99 classification with HTSUS code 8542.39.0001.