XC6216BC02ER-G Linear Voltage Regulator Equivalent & Substitute Parts

Part Overview

The XC6216BC02ER-G is an active linear voltage regulator IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This positive fixed output regulator delivers 150mA at 12V with a maximum input voltage of 28V and is housed in a 6-USPC surface mount package. The device is currently in active production status with 869 units in stock inventory. Substitute parts are identified when component availability is limited, supply chain disruptions occur, or inventory requirements necessitate alternative sourcing from the same manufacturer's product line.

Substiute Parts

XC6216BC02ER-G

Torex Semiconductor LtdIn Stock: 900XC6216BC02ER-G Datasheet

Current PartRFQ

XC6701BC02ER-G

Torex Semiconductor LtdIn Stock: 6686XC6701BC02ER-G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6216BC02ER-G are identified based on strict electrical and mechanical parameter matching within the Torex Semiconductor product portfolio. The substitution criteria are limited to the following parameters:

Critical Matching Parameters:

• Output voltage: 12V fixed
• Output current capability: 150mA
• Input voltage maximum: 28V
• Package type: 6-UFDFN Exposed Pad (6-USPC 1.8x2)
• Mounting type: Surface Mount
• Output configuration: Positive fixed
• Protection features: Over Current, Over Temperature
• Control features: Enable function
• Operating temperature range: -40°C to 85°C
• Compliance: ROHS3, MSL 1

The XC6701BC02ER-G qualifies as a parametric equivalent substitute because it maintains identical specifications across all critical electrical and mechanical parameters. Both devices are manufactured by Torex Semiconductor Ltd and share the same base functional architecture within the linear regulator category.

Parameter Comparison

Engineering Selection Recommendations

Both the XC6216BC02ER-G and XC6701BC02ER-G are active production devices manufactured by Torex Semiconductor Ltd with identical compliance certifications (ROHS3, MSL 1, REACH Unaffected, EAR99 ECCN classification). Selection between these parts is determined by application-specific requirements for quiescent current and power supply rejection ratio (PSRR) performance.

XC6216BC02ER-G Selection Criteria:

• Applications requiring minimum quiescent current consumption (9µA)
• Battery-powered or ultra-low-power systems where standby current is critical
• Designs where lower PSRR (30dB) is acceptable

XC6701BC02ER-G Selection Criteria:

• Applications requiring superior noise rejection (50dB PSRR)
• Systems with higher acceptable quiescent current budget (115µA)
• Designs prioritizing power supply noise filtering over standby current efficiency
• Higher inventory availability (6600 units vs. 869 units)

Both devices are pin-compatible, package-compatible, and functionally interchangeable for the core 12V/150mA regulation function. The choice between them depends solely on whether the application prioritizes low quiescent current or superior PSRR performance.

Frequently Asked Questions (FAQ)

Q: Are XC6216BC02ER-G and XC6701BC02ER-G pin-compatible?

A: Yes. Both devices use the 6-UFDFN Exposed Pad package with identical pinout and control features (Enable function). Direct PCB substitution is possible without layout modification.

Q: What is the primary difference between these two regulators?

A: The XC6216BC02ER-G features lower quiescent current (9µA) and lower PSRR (30dB), while the XC6701BC02ER-G features higher quiescent current (115µA) and superior PSRR (50dB). All other electrical and mechanical specifications are identical.

Q: Can I use XC6701BC02ER-G as a direct replacement for XC6216BC02ER-G?

A: Direct substitution is possible if the application can tolerate the higher quiescent current (106µA difference) and does not require the lower noise floor of the XC6216BC02ER-G. Verify that the additional quiescent current does not impact system power budget or thermal performance.

Q: Can I use XC6216BC02ER-G as a direct replacement for XC6701BC02ER-G?

A: Direct substitution is possible if the application does not require the superior PSRR performance of the XC6701BC02ER-G. The XC6216BC02ER-G will provide lower quiescent current consumption, which may improve overall system efficiency.

Q: Are both parts RoHS compliant?

A: Yes. Both XC6216BC02ER-G and XC6701BC02ER-G are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the package designation 6-USPC?

A: 6-USPC (1.8x2) is the supplier device package designation for the 6-UFDFN Exposed Pad package type. This is a 6-pin ultra-fine pitch package with exposed thermal pad, measuring 1.8mm × 2.0mm.

Q: Do these parts require any special handling or storage considerations?

A: Both devices have MSL 1 rating, indicating unlimited shelf life without moisture sensitivity restrictions. Standard ESD precautions for surface mount components apply.

Q: What is PSRR and why does it differ between these parts?

A: Power Supply Rejection Ratio (PSRR) measures the regulator's ability to reject noise and ripple from the input power supply. The XC6701BC02ER-G provides 50dB PSRR versus 30dB for the XC6216BC02ER-G, making it more effective at filtering input noise. Applications with noisy power sources benefit from higher PSRR.