XC6210C33AMR-G Equivalent & Substitute Parts

Part Overview

The XC6210C33AMR-G is a linear voltage regulator IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This device delivers a fixed positive output of 3.35V at 700mA with a maximum dropout voltage of 0.075V @ 100mA, housed in an SOT-25 surface mount package. The regulator features an enable control function and over-current protection, operating across the temperature range of -40°C to 85°C. Currently in active production status with 685 units in stock, this component is ROHS3 compliant and MSL Level 1 rated. Identifying equivalent substitute parts is essential for supply chain continuity, design flexibility, and inventory optimization when the primary part becomes unavailable or when alternative sourcing is required.

Substiute Parts

XC6210C33AMR-G

Torex Semiconductor LtdIn Stock: 722XC6210C33AMR-G Datasheet

Current PartRFQ

XC6210A33AMR-G

Torex Semiconductor LtdIn Stock: 1185XC6210A33AMR-G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6210C33AMR-G are identified based on strict parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is governed by the following key parameters:

Electrical Specifications:

• Fixed output voltage of 3.35V
• Output current capacity of 700mA
• Maximum input voltage of 6V
• Voltage dropout of 0.075V @ 100mA
• Quiescent current of 67.5 µA
• PSRR of 60dB (1kHz)
• Operating temperature range of -40°C to 85°C

Mechanical & Packaging Specifications:

• Surface mount mounting type
• SOT-25 package configuration (SC-74A, SOT-753 case)
• Positive output configuration with fixed output type
• Single regulator configuration

Functional Features:

• Enable control capability
• Over-current protection

Compliance & Environmental:

• ROHS3 compliance
• MSL Level 1 rating
• Active product status

Only parts matching all of these parameters across electrical performance, physical packaging, functional features, and regulatory compliance are classified as parametric equivalents.

Parameter Comparison

Engineering Selection Recommendations

The XC6210A33AMR-G is a direct parametric equivalent to the XC6210C33AMR-G. Both components are manufactured by Torex Semiconductor Ltd and share identical electrical specifications, package configurations, and functional features. The distinction between these parts lies in the internal revision level (C versus A), which does not affect electrical performance or mechanical compatibility.

Selection Criteria:

Both parts maintain active product status and full ROHS3 compliance with MSL Level 1 rating, ensuring regulatory and environmental compatibility across applications. The XC6210A33AMR-G currently has higher inventory availability (1119 units versus 685 units), making it a viable alternative for supply chain optimization without compromising design specifications or performance characteristics.

Pin-to-pin compatibility, electrical performance under identical operating conditions, and thermal characteristics remain unchanged between these variants. Direct substitution is permissible in all applications where the XC6210C33AMR-G is specified, provided that the design does not contain revision-specific constraints documented in the original design documentation.

Frequently Asked Questions (FAQ)

Q: Can the XC6210A33AMR-G be used as a direct replacement for the XC6210C33AMR-G?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, output voltage (3.35V), output current (700mA), dropout voltage (0.075V @ 100mA), quiescent current (67.5 µA), PSRR (60dB @ 1kHz), and operating temperature range (-40°C to 85°C). The internal revision designation does not affect functional performance or mechanical compatibility.

Q: Are the package dimensions and pin configurations identical?

A: Yes. Both the XC6210C33AMR-G and XC6210A33AMR-G use the SOT-25 package (SC-74A, SOT-753 case) with surface mount configuration. Pin-to-pin compatibility is guaranteed, allowing direct PCB substitution without layout modifications.

Q: Do both parts meet the same compliance and environmental standards?

A: Yes. Both components are ROHS3 compliant, carry MSL Level 1 (Unlimited) moisture sensitivity rating, and maintain active product status. Regulatory and environmental requirements are identical.

Q: What is the difference between the XC6210C33AMR-G and XC6210A33AMR-G?

A: The difference is the internal revision level (C versus A). This revision designation reflects manufacturing process updates or internal design refinements by Torex Semiconductor Ltd but does not alter electrical performance, mechanical specifications, or functional features visible to the end user.

Q: Can I mix these parts in the same production batch?

A: Yes. Since both parts are parametric equivalents with identical electrical and mechanical specifications, they can be used interchangeably within the same design and production environment without functional or performance degradation.

Q: What should I verify before substituting these parts in an existing design?

A: Verify that your design does not contain revision-specific constraints or undocumented dependencies on the XC6210C33AMR-G revision level. Confirm that the application operates within the specified electrical parameters: 3.35V output, 700mA maximum current, 6V maximum input, and -40°C to 85°C operating temperature range.