XC6210C11AMR-G Equivalent & Substitute Parts

Part Overview

The XC6210C11AMR-G is a linear voltage regulator IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This device delivers a fixed positive output of 1.15V at 500mA with a maximum dropout voltage of 0.5V @ 100mA, housed in an SOT-25 surface mount package. The part is currently Active in product status and maintains full RoHS3 compliance with MSL Level 1 rating. Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the XC6210 base product family, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

XC6210C11AMR-G

Torex Semiconductor LtdIn Stock: 795XC6210C11AMR-G Datasheet

Current PartRFQ

XC6210A11AMR-G

Torex Semiconductor LtdIn Stock: 1222XC6210A11AMR-G Datasheet

Parametric EquivalentRFQ

XC6210B11AMR-G

Torex Semiconductor LtdIn Stock: 946XC6210B11AMR-G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6210C11AMR-G are identified within the XC6210 base product family based on strict parametric equivalence. The following electrical and mechanical parameters must remain constant for substitution eligibility:

• Output Configuration: Positive
• Output Type: Fixed
• Voltage - Output (Min/Fixed): 1.15V
• Voltage - Input (Max): 6V
• Current - Output: 500mA
• Voltage Dropout (Max): 0.5V @ 100mA
• Operating Temperature: -40°C ~ 85°C (TA)
• Package / Case: SC-74A, SOT-753
• Supplier Device Package: SOT-25
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Product Status: Active

The identified substitute parts XC6210A11AMR-G and XC6210B11AMR-G maintain all critical electrical specifications and physical packaging requirements, enabling direct functional replacement in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—XC6210C11AMR-G, XC6210A11AMR-G, and XC6210B11AMR-G—are Active products from Torex Semiconductor Ltd with identical electrical specifications and physical packaging. Each part maintains ROHS3 compliance, REACH Unaffected status, and MSL Level 1 rating, confirming suitability for standard manufacturing and storage environments.

The XC6210B11AMR-G exhibits a lower quiescent current specification of 55 µA compared to 61.5 µA in the XC6210C11AMR-G and XC6210A11AMR-G variants. This parameter difference does not affect substitution eligibility but may influence power consumption characteristics in battery-powered or low-power applications where quiescent current is a design consideration.

Selection between these parts should be based on availability and application-specific power consumption requirements. All three parts are functionally interchangeable for circuits requiring a 1.15V fixed positive output at 500mA with SOT-25 surface mount packaging.

Frequently Asked Questions (FAQ)

Q: Can XC6210A11AMR-G and XC6210B11AMR-G be used as direct replacements for XC6210C11AMR-G?

A: Yes. Both parts maintain identical output voltage (1.15V fixed), output current (500mA), input voltage rating (6V maximum), dropout voltage (0.5V @ 100mA), operating temperature range (-40°C ~ 85°C), and physical packaging (SOT-25). All three parts are Active products with ROHS3 compliance and identical control and protection features.

Q: What is the difference between these substitute parts?

A: The primary difference is quiescent current (Iq). XC6210C11AMR-G and XC6210A11AMR-G specify 61.5 µA, while XC6210B11AMR-G specifies 55 µA. All other electrical and mechanical parameters are identical. This difference may be relevant in applications where standby power consumption is critical.

Q: Are the packages identical across all three parts?

A: Yes. All three parts use SC-74A, SOT-753 package designation with SOT-25 supplier device package, confirming identical PCB footprint and mounting requirements.

Q: Do all parts meet the same compliance standards?

A: Yes. XC6210C11AMR-G, XC6210A11AMR-G, and XC6210B11AMR-G are all ROHS3 compliant, REACH Unaffected, and carry MSL Level 1 (Unlimited) moisture sensitivity rating.

Q: Can I mix these parts in the same production batch?

A: Yes, from a functional and compliance perspective. However, if quiescent current specifications are critical to your application, maintain consistency within a design to ensure uniform power consumption characteristics across all units.