XC6192BA15ER-G Equivalent & Substitute Parts

Part Overview

The XC6192BA15ER-G is an active-status Power Management Integrated Circuit (PMIC) manufactured by Torex Semiconductor Ltd. This component functions as a Power Switch/Driver with P-Channel output configuration, designed for high-side switching applications in the 2.5V to 6V load voltage range. The device delivers 400mA maximum output current with 340mOhm typical on-resistance and integrates Power Good and Shutdown features with short-circuit fault protection.

Substitute parts are identified when equivalent electrical specifications, mechanical packaging, and compliance certifications align with the main part number, enabling direct replacement in circuit designs without functional degradation.

Key Parameters

Parameter	Value
Manufacturer Part Number	XC6192BA15ER-G
Manufacturer	Torex Semiconductor Ltd
Category	Power Management (PMIC)
Series	XC6192
Switch Type	General Purpose
Output Type	P-Channel
Output Configuration	High Side
Number of Outputs	1
Ratio - Input:Output	1:1
Voltage - Load	2.5V ~ 6V
Current - Output (Max)	400mA
Rds On (Typ)	340mOhm
Interface	On/Off
Input Type	Non-Inverting
Features	Power Good, Shutdown
Fault Protection	Short Circuit
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package / Case	8-XFDFN Exposed Pad
Supplier Device Package	8-USP-B06 (2x2)
Product Status	Active
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)
REACH Status	REACH Unaffected

Substitute Part Grouping Explanation

Substitute parts for the XC6192BA15ER-G are identified within the XC6192 series based on strict electrical and mechanical parameter equivalence. All substitute candidates maintain identical specifications across the following critical parameters:

Electrical Equivalence Criteria:

Output Type: P-Channel
Output Configuration: High Side
Number of Outputs: 1
Ratio - Input:Output: 1:1
Voltage - Load: 2.5V ~ 6V
Current - Output (Max): 400mA
Rds On (Typ): 340mOhm
Interface: On/Off
Input Type: Non-Inverting
Features: Power Good, Shutdown
Fault Protection: Short Circuit
Operating Temperature: -40°C ~ 85°C (TA)

Mechanical & Compliance Equivalence Criteria:

Mounting Type: Surface Mount
Package / Case: 8-XFDFN Exposed Pad
Product Status: Active
RoHS Status: ROHS3 Compliant
Moisture Sensitivity Level (MSL): 1 (Unlimited)
REACH Status: REACH Unaffected
Manufacturer: Torex Semiconductor Ltd

Packaging variants (Tape & Reel vs. Cut Tape & Digi-Reel®) and supplier device package designations (8-USP-B06 vs. USP-8B06) do not affect electrical substitutability; these represent distribution format differences only.

Parameter Comparison

Part Number	Output Type	Voltage - Load	Current - Output (Max)	Rds On (Typ)	Operating Temperature	Package / Case	Product Status	Inventory (Pcs)
XC6192BA15ER-G	P-Channel	2.5V ~ 6V	400mA	340mOhm	-40°C ~ 85°C	8-XFDFN Exposed Pad	Active	1182
XC6192A103ER-G	P-Channel	2.5V ~ 6V	400mA	340mOhm	-40°C ~ 85°C	8-XFDFN Exposed Pad	Active	824
XC6192A305ER-G	P-Channel	2.5V ~ 6V	400mA	340mOhm	-40°C ~ 85°C	8-XFDFN Exposed Pad	Active	1075
XC6192A310ER-G	P-Channel	2.5V ~ 6V	400mA	340mOhm	-40°C ~ 85°C	8-XFDFN Exposed Pad	Active	837
XC6192A510ER-G	P-Channel	2.5V ~ 6V	400mA	340mOhm	-40°C ~ 85°C	8-XFDFN Exposed Pad	Active	1166
XC6192AA05ER-G	P-Channel	2.5V ~ 6V	400mA	340mOhm	-40°C ~ 85°C	8-XFDFN Exposed Pad	Active	1115
XC6192AA10ER-G	P-Channel	2.5V ~ 6V	400mA	340mOhm	-40°C ~ 85°C	8-XFDFN Exposed Pad	Active	5646
XC6192AA15ER-G	P-Channel	2.5V ~ 6V	400mA	340mOhm	-40°C ~ 85°C	8-XFDFN Exposed Pad	Active	1079
XC6192B3NNER-G	P-Channel	2.5V ~ 6V	400mA	340mOhm	-40°C ~ 85°C	8-XFDFN Exposed Pad	Active	904
XC6192BANNER-G	P-Channel	2.5V ~ 6V	400mA	340mOhm	-40°C ~ 85°C	8-XFDFN Exposed Pad	Active	5043

Engineering Selection Recommendations

All identified substitute parts maintain full electrical and mechanical compatibility with the XC6192BA15ER-G. Selection among equivalent parts is determined by:

Product Status & Compliance: All substitute candidates carry Active product status and maintain ROHS3 compliance, REACH Unaffected designation, and MSL Level 1 (Unlimited) moisture sensitivity rating, ensuring regulatory alignment with the original part.

Inventory Availability: XC6192AA10ER-G (5646 Pcs) and XC6192BANNER-G (5043 Pcs) offer the highest stock levels for applications requiring extended supply assurance. XC6192A310ER-G (837 Pcs) and XC6192B3NNER-G (904 Pcs) represent lower-inventory alternatives.

Packaging Format: Parts designated with 8-USP-B06 (2x2) supplier device package are supplied in Tape & Reel format. Parts designated with USP-8B06 supplier device package are supplied in Cut Tape & Digi-Reel® format. Both formats are mechanically and electrically equivalent; selection depends on assembly process requirements.

Part Number Variants: Differences in part number suffixes (BA15, A103, A305, A310, A510, AA05, AA10, AA15, B3NN, BAN) reflect internal Torex design variants or manufacturing date codes that do not affect functional performance within the specified electrical parameters.

Frequently Asked Questions (FAQ)

Q: Can XC6192AA10ER-G directly replace XC6192BA15ER-G in existing circuit designs?

A: Yes. Both parts are electrically and mechanically equivalent across all specified parameters: P-Channel output, 400mA maximum current, 340mOhm on-resistance, 2.5V to 6V load voltage range, -40°C to 85°C operating temperature, and 8-XFDFN Exposed Pad package. Direct substitution is supported without circuit modification.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel® packaging?

A: Tape & Reel and Cut Tape & Digi-Reel® represent distribution formats only. Both formats contain electrically identical components in the same 8-XFDFN Exposed Pad package. Tape & Reel is optimized for high-volume automated assembly; Cut Tape & Digi-Reel® accommodates lower-volume or mixed-component pick-and-place operations. Electrical performance is identical.

Q: Are all substitute parts manufactured by Torex Semiconductor Ltd?

A: Yes. All substitute parts listed are manufactured by Torex Semiconductor Ltd and belong to the XC6192 series, ensuring consistent design, quality, and reliability standards.

Q: Do part number suffixes (BA15, A103, A305, etc.) indicate functional differences?

A: No. Part number suffixes reflect internal design variants or manufacturing date codes within the XC6192 series. All listed parts maintain identical electrical specifications, output characteristics, protection features, and operating ranges. Functional performance is equivalent.

Q: What compliance certifications apply to all substitute parts?

A: All substitute parts maintain ROHS3 compliance, REACH Unaffected status, and Moisture Sensitivity Level 1 (Unlimited). These certifications are consistent across the entire substitute list and match the original XC6192BA15ER-G.

Q: Can I mix Tape & Reel and Cut Tape & Digi-Reel® formats in the same production run?

A: Yes. Both packaging formats contain identical components. Format selection depends on assembly equipment compatibility and supply chain logistics. No electrical or mechanical incompatibility exists between formats.

Q: Which substitute part offers the best inventory availability?

A: XC6192AA10ER-G provides the highest inventory level at 5646 pieces, followed by XC6192BANNER-G at 5043 pieces. Both are suitable for applications requiring extended supply assurance or high-volume production.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message