XC6192B310ER-G Equivalent & Substitute Parts

Part Overview

The XC6192B310ER-G is an active-status Power Management Integrated Circuit (PMIC) manufactured by Torex Semiconductor Ltd. This component functions as a Power Switch/Driver with 1:1 ratio configuration, P-Channel high-side output topology, and 400mA maximum output current capability. The device operates across a 2.5V to 6V load voltage range and integrates power good and shutdown features with short-circuit fault protection.

Substitute parts are necessary when the primary part number becomes unavailable, when inventory constraints require alternative sourcing, or when design flexibility permits selection from the XC6192 series variants that maintain identical electrical and mechanical specifications.

Substiute Parts

XC6192B310ER-G

Torex Semiconductor LtdIn Stock: 956XC6192B310ER-G Datasheet

Current PartRFQ

XC6192A103ER-G

Torex Semiconductor LtdIn Stock: 848XC6192A103ER-G Datasheet

Parametric EquivalentRFQ

XC6192A305ER-G

Torex Semiconductor LtdIn Stock: 1093XC6192A305ER-G Datasheet

Parametric EquivalentRFQ

XC6192A310ER-G

Torex Semiconductor LtdIn Stock: 918XC6192A310ER-G Datasheet

Parametric EquivalentRFQ

XC6192A510ER-G

Torex Semiconductor LtdIn Stock: 1180XC6192A510ER-G Datasheet

Parametric EquivalentRFQ

XC6192AA05ER-G

Torex Semiconductor LtdIn Stock: 1200XC6192AA05ER-G Datasheet

Parametric EquivalentRFQ

XC6192AA10ER-G

Torex Semiconductor LtdIn Stock: 5703XC6192AA10ER-G Datasheet

Parametric EquivalentRFQ

XC6192AA15ER-G

Torex Semiconductor LtdIn Stock: 1105XC6192AA15ER-G Datasheet

Parametric EquivalentRFQ

XC6192B3NNER-G

Torex Semiconductor LtdIn Stock: 949XC6192B3NNER-G Datasheet

Parametric EquivalentRFQ

XC6192BANNER-G

Torex Semiconductor LtdIn Stock: 5109XC6192BANNER-G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

All substitute parts listed for the XC6192B310ER-G maintain identical electrical performance and mechanical compatibility based on the following critical parameters:

Electrical Equivalence Criteria:

• Output Type: P-Channel
• Output Configuration: High Side
• Ratio - Input:Output: 1:1
• Current - Output (Max): 400mA
• Voltage - Load: 2.5V ~ 6V
• Rds On (Typ): 340mOhm
• Interface: On/Off
• Input Type: Non-Inverting
• Features: Power Good, Shutdown
• Fault Protection: Short Circuit
• Operating Temperature: -40°C ~ 85°C (TA)

Mechanical Compatibility Criteria:

• Mounting Type: Surface Mount
• Package / Case: 8-XFDFN Exposed Pad
• Base Product Number: XC6192 series

Compliance Equivalence:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected
• ECCN: EAR99

All substitute parts are manufactured by Torex Semiconductor Ltd and carry Active product status. Substitution is valid across all variants within the XC6192 series that satisfy these parameters.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are qualified for direct replacement based on the following engineering criteria:

Product Status Compliance: All substitute parts maintain Active product status from Torex Semiconductor Ltd, ensuring continued manufacturer support and availability.

Regulatory & Environmental Compliance: All parts are ROHS3 Compliant and REACH Unaffected, meeting current environmental and hazardous substance restrictions. Moisture Sensitivity Level (MSL) 1 designation indicates unlimited shelf life without moisture control requirements.

Electrical & Mechanical Interchangeability: All substitute parts share identical electrical specifications (400mA output current, 340mOhm Rds On, 2.5V–6V load voltage range) and mechanical form factor (8-XFDFN Exposed Pad, Surface Mount). Pin-to-pin compatibility is maintained across all variants.

Packaging Considerations: Most substitute parts are supplied in Tape & Reel (TR) format. XC6192AA05ER-G is supplied in Cut Tape (CT) & Digi-Reel® format. Selection between packaging types depends on assembly process requirements and order quantity thresholds.

Inventory Availability: XC6192AA10ER-G (5646 Pcs) and XC6192BANNER-G (5043 Pcs) offer the highest inventory levels for immediate procurement. All other variants maintain inventory above 800 units.

Frequently Asked Questions (FAQ)

Q: Can XC6192A310ER-G be used as a direct replacement for XC6192B310ER-G?

A: Yes. Both parts share identical electrical specifications (400mA output current, 340mOhm Rds On, 2.5V–6V load voltage), mechanical packaging (8-XFDFN Exposed Pad), and compliance certifications (ROHS3, REACH Unaffected). Pin-to-pin compatibility is maintained.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape (CT) & Digi-Reel® packaging provides individual tape segments for lower-volume applications. Electrical and mechanical specifications are identical; selection depends on assembly process and order quantity.

Q: Are all substitute parts manufactured by the same company?

A: Yes. All substitute parts listed are manufactured by Torex Semiconductor Ltd, ensuring consistent quality standards and design lineage within the XC6192 series.

Q: Do substitute parts require any design modifications or PCB layout changes?

A: No. All substitute parts maintain identical pin assignments, package dimensions (8-XFDFN Exposed Pad), and electrical interface specifications. No PCB layout or schematic modifications are required.

Q: What compliance certifications apply to all substitute parts?

A: All substitute parts are ROHS3 Compliant, REACH Unaffected, and classified as EAR99 for export control purposes. Moisture Sensitivity Level (MSL) 1 indicates unlimited shelf life without moisture-controlled storage.

Q: Which substitute part offers the best inventory availability?

A: XC6192AA10ER-G maintains the highest inventory level at 5646 units, followed by XC6192BANNER-G at 5043 units. Both are suitable for immediate procurement and high-volume applications.

Q: Can substitute parts be mixed within a single production batch?

A: Yes. All substitute parts are electrically and mechanically equivalent. Mixed sourcing from multiple part numbers within the XC6192 series does not affect circuit performance or reliability.