XC6136N27ANR-G Equivalent & Substitute Parts

Part Overview

The XC6136N27ANR-G is an active low voltage detector supervisor integrated circuit manufactured by Torex Semiconductor Ltd. This single-channel power management IC operates as an open drain or open collector output device with a 2.7V threshold voltage. The device is designed for system supervision applications requiring voltage monitoring and reset signal generation.

The XC6136N27ANR-G maintains active product status with 894 units in current inventory. Equivalent substitute parts are identified based on matching electrical specifications, mechanical packaging, and compliance certifications to support component procurement flexibility and supply chain continuity.

Substiute Parts

XC6136N27ANR-G

Torex Semiconductor LtdIn Stock: 982XC6136N27ANR-G Datasheet

Current PartRFQ

XC6136N27BNR-G

Torex Semiconductor LtdIn Stock: 838XC6136N27BNR-G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6136N27ANR-G are identified through direct parametric equivalence. The substitution logic is based on the following critical parameters that must remain constant across all equivalent devices:

Electrical Specifications:

• Voltage threshold detection: 2.7V
• Output configuration: Open Drain or Open Collector
• Reset signal polarity: Active Low
• Reset timeout duration: 40µs Typical
• Single-channel voltage monitoring capability

Mechanical & Packaging Specifications:

• Package type: SC-82 (SSOT-24)
• Mounting technology: Surface Mount
• Packaging format: Tape & Reel (TR)

Environmental & Compliance Specifications:

• Operating temperature range: -40°C ~ 105°C (TA)
• RoHS3 Compliance
• REACH Unaffected status
• Moisture Sensitivity Level 1 (Unlimited)

Parts meeting all specified parameters are classified as parametric equivalents and direct substitutes for the XC6136N27ANR-G.

Parameter Comparison

Engineering Selection Recommendations

Both the XC6136N27ANR-G and XC6136N27BNR-G are active product offerings from Torex Semiconductor Ltd with identical electrical and mechanical specifications. Selection between these parts is based on the following engineering criteria:

Product Status & Availability: Both devices maintain active product status with current inventory availability. The XC6136N27ANR-G has 894 units in stock, while the XC6136N27BNR-G has 824 units available.

Compliance & Regulatory: Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and distribution.

Packaging & Handling: Both devices are supplied in Tape & Reel format with SC-82 (SSOT-24) surface mount packaging. Moisture Sensitivity Level 1 (Unlimited) indicates no special moisture control requirements during storage or handling.

Functional Equivalence: The devices are electrically and mechanically interchangeable for all applications requiring single-channel voltage supervision at 2.7V threshold with active low reset output.

Frequently Asked Questions (FAQ)

Q: Are the XC6136N27ANR-G and XC6136N27BNR-G directly interchangeable?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, output characteristics, operating temperature range, and package configuration. They are direct substitutes for each other in circuit applications.

Q: What does the voltage threshold of 2.7V indicate?

A: The 2.7V threshold specifies the supply voltage level at which the supervisor detects an out-of-specification condition. When the monitored voltage falls below 2.7V, the device generates a reset signal.

Q: How does the active low reset output function?

A: The active low reset output means the reset signal is asserted (driven low) when a voltage fault condition is detected. The output remains in the inactive (high impedance or high) state during normal operation.

Q: What is the significance of the 40µs typical reset timeout?

A: The reset timeout specifies the duration for which the reset signal remains asserted after the monitored voltage returns to normal operating levels. This timing ensures system stabilization before normal operation resumes.

Q: Are there any differences in the part numbers between XC6136N27ANR-G and XC6136N27BNR-G?

A: The part numbers differ only in the middle character designation (A versus B). Both parts share the same base product number XC6136 and identical electrical specifications. The designation difference does not affect functional or electrical performance.

Q: What does SSOT-24 packaging mean?

A: SSOT-24 refers to a Shrink Small Outline Transistor package with 24 pins. The SC-82 case designation identifies this as a surface mount package suitable for automated assembly processes.

Q: Is special handling required for these components?

A: No special moisture control handling is required. Both devices have Moisture Sensitivity Level 1 (Unlimited), indicating they can be stored and handled under standard conditions without moisture bake-out procedures.

Q: Can these parts be used in applications requiring -40°C to 105°C operation?

A: Yes. Both the XC6136N27ANR-G and XC6136N27BNR-G are rated for the full -40°C to 105°C operating temperature range, making them suitable for industrial and automotive applications.