XC6135C17C9R-G Equivalent & Substitute Parts

Part Overview

The XC6135C17C9R-G is a voltage detector supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This single-channel supervisor operates with a 1.7V threshold voltage and delivers push-pull, totem pole output configuration. The device is designed for surface mount applications in the 4-XDFN Exposed Pad package format.

The XC6135C17C9R-G maintains Active product status with 886 units currently in stock. Identification of equivalent substitute parts is necessary to ensure supply chain continuity, optimize inventory management, and provide design flexibility for production environments where primary part availability may be constrained.

Substiute Parts

XC6135C17C9R-G

Torex Semiconductor LtdIn Stock: 961XC6135C17C9R-G Datasheet

Current PartRFQ

XC6135C17D9R-G

Torex Semiconductor LtdIn Stock: 988XC6135C17D9R-G Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6135C17C9R-G are identified based on strict parametric equivalence across the following critical criteria:

Electrical Parameters:

• Voltage threshold: 1.7V
• Single-channel voltage monitoring configuration
• Push-pull, totem pole output topology
• Active High reset function
• 44µs typical reset timeout

Mechanical & Package Parameters:

• 4-XDFN Exposed Pad package format
• 4-USPQ-B05 (1x1) supplier device package
• Surface mount mounting type

Compliance & Environmental Parameters:

• ROHS3 compliance
• MSL Level 1 (Unlimited moisture sensitivity)
• REACH Unaffected status
• Operating temperature range: -40°C ~ 105°C

Product Status:

• Active product status only

Parts meeting all these parameters are classified as parametric equivalents and direct substitutes. No deviations from specified parameters are permitted for substitution classification.

Parameter Comparison

Engineering Selection Recommendations

The XC6135C17D9R-G is a direct parametric equivalent to the XC6135C17C9R-G. Both parts are manufactured by Torex Semiconductor Ltd and share identical electrical, mechanical, and compliance specifications.

Selection Basis:

Both parts maintain Active product status, ensuring long-term availability and manufacturing support. Both are ROHS3 compliant and REACH Unaffected, meeting current environmental and regulatory requirements for industrial and commercial applications.

The XC6135C17D9R-G currently maintains higher inventory availability (938 units versus 886 units), providing supply chain advantage without compromising technical performance or compliance posture.

Selection between these parts should be based on inventory availability, lead time requirements, and supply chain logistics. No technical differentiation exists between the two parts.

Frequently Asked Questions (FAQ)

Q: Are XC6135C17C9R-G and XC6135C17D9R-G electrically interchangeable?

A: Yes. Both parts are voltage detectors with identical threshold voltage (1.7V), output configuration (push-pull, totem pole), reset function (Active High), and reset timeout (44µs typical). Electrical performance is equivalent.

Q: Do these parts use the same package?

A: Yes. Both parts use the 4-XDFN Exposed Pad package with 4-USPQ-B05 (1x1) supplier device package designation. PCB footprints and mounting procedures are identical.

Q: Are there compliance differences between these parts?

A: No. Both parts are ROHS3 compliant, REACH Unaffected, and carry MSL Level 1 (Unlimited) moisture sensitivity rating. Compliance posture is identical.

Q: What is the operating temperature range for both parts?

A: Both parts operate across -40°C to 105°C ambient temperature range (TA). Thermal performance specifications are identical.

Q: Can I substitute XC6135C17D9R-G for XC6135C17C9R-G in existing designs?

A: Yes. The parts are parametric equivalents with identical electrical and mechanical specifications. No design modifications are required for substitution.

Q: What determines substitution eligibility for these supervisor ICs?

A: Substitution eligibility is determined by matching voltage threshold, channel count, output topology, reset function, package format, and compliance certifications. All these parameters are identical between the two parts.