XC6118N40AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118N40AMR-G is an active voltage detector supervisor integrated circuit manufactured by Torex Semiconductor Ltd. This single-channel power management IC operates as a voltage monitoring device with open drain output configuration, designed for system supervision applications requiring reset signal generation. The device is classified as a PMIC (Power Management Integrated Circuit) and is currently in active product status with full RoHS3 compliance. Substitute parts are identified to address inventory availability, packaging preferences, or supply chain requirements while maintaining functional and electrical equivalence.

Substiute Parts

XC6118N40AMR-G

Torex Semiconductor LtdIn Stock: 776XC6118N40AMR-G Datasheet

Current PartRFQ

XC6118N40BMR-G

Torex Semiconductor LtdIn Stock: 1521XC6118N40BMR-G Datasheet

Parametric EquivalentRFQ

S-1009N40I-M5T1U

ABLIC Inc.In Stock: 780S-1009N40I-M5T1U Datasheet

Parametric EquivalentRFQ

S-80840CNMC-B8ZT2U

ABLIC Inc.In Stock: 1824S-80840CNMC-B8ZT2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6118N40AMR-G are qualified based on strict electrical and mechanical parameter equivalence. All identified substitutes maintain the following critical parameters:

• Single-channel voltage detection at 4V threshold
• Open drain or open collector output configuration
• Active low reset signal logic
• Operating temperature range of -40°C to 85°C
• Surface mount technology with SC-74A / SOT-753 package compatibility
• ROHS3 compliance and MSL Level 1 rating
• Active product status from qualified manufacturers

Substitutes are grouped by manufacturer and packaging format. The XC6118N40BMR-G represents a direct Torex Semiconductor variant. The S-1009N40I-M5T1U and S-80840CNMC-B8ZT2U are ABLIC Inc. equivalents supplied in cut tape format rather than tape and reel. All three substitute parts satisfy the parametric requirements for functional replacement in applications requiring 4V voltage supervision with active low reset output.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts are qualified for direct replacement based on electrical parameter equivalence and compliance certifications. Selection between substitutes is determined by packaging and supply requirements:

XC6118N40BMR-G (Torex Semiconductor Ltd): Select this substitute when maintaining the same manufacturer and tape & reel packaging format is preferred. This part provides identical electrical specifications and packaging configuration to the primary part number.

S-1009N40I-M5T1U (ABLIC Inc.): Select this substitute when ABLIC Inc. sourcing is acceptable and cut tape packaging is compatible with assembly processes. This part maintains all critical electrical parameters and compliance certifications.

S-80840CNMC-B8ZT2U (ABLIC Inc.): Select this substitute when ABLIC Inc. sourcing is acceptable and cut tape packaging is compatible with assembly processes. This part maintains all critical electrical parameters and compliance certifications.

All substitute parts carry active product status, ROHS3 compliance, and MSL Level 1 rating, confirming suitability for production applications without additional qualification testing.

Frequently Asked Questions (FAQ)

Q: Can the XC6118N40BMR-G replace the XC6118N40AMR-G in production designs?

A: Yes. The XC6118N40BMR-G is a parametric equivalent with identical electrical specifications, operating temperature range, voltage threshold, output configuration, and package type. The primary difference is packaging format (tape & reel for both), making this a direct substitution.

Q: What is the difference between tape & reel and cut tape packaging?

A: Tape & reel (TR) packaging supplies components on continuous carrier tape wound on reels, suitable for high-volume automated assembly. Cut tape (CT) packaging supplies components on cut segments of carrier tape, suitable for lower-volume or manual assembly processes. Both formats use the same physical package (SOT-25-5) and are electrically identical.

Q: Are the ABLIC Inc. parts (S-1009N40I-M5T1U and S-80840CNMC-B8ZT2U) fully compatible with the Torex XC6118N40AMR-G?

A: Yes. Both ABLIC parts are parametric equivalents meeting all critical electrical specifications: 4V voltage threshold, single-channel monitoring, open drain output, active low reset, and -40°C to 85°C operating range. Both are ROHS3 compliant with MSL Level 1 rating. The primary difference is manufacturer and packaging format (cut tape instead of tape & reel).

Q: What parameters determine substitution eligibility for this voltage detector?

A: Substitution eligibility is determined by: voltage threshold (4V), number of monitored channels (1), output type (open drain or open collector), reset logic (active low), operating temperature range (-40°C to 85°C), package type (SC-74A / SOT-753), and compliance certifications (ROHS3, MSL Level 1).

Q: Can I mix packaging formats in a single production run?

A: Packaging format selection depends on assembly equipment and process requirements. Tape & reel format is standard for high-speed automated pick-and-place equipment. Cut tape format is suitable for lower-volume or manual assembly. Verify compatibility with your specific assembly process before mixing formats.

Q: Are all substitute parts currently in stock?

A: Inventory status is subject to change. Refer to current inventory data: XC6118N40AMR-G (725 pcs), XC6118N40BMR-G (1492 pcs), S-1009N40I-M5T1U (758 pcs), S-80840CNMC-B8ZT2U (1729 pcs).

Q: Do these parts require different PCB layouts or footprints?

A: No. All parts use the same package type (SC-74A / SOT-753), requiring identical PCB footprints and layout considerations. No design modifications are necessary when substituting between these parts.