XC6118N33AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118N33AMR-G is a single-channel voltage detector supervisor IC manufactured by Torex Semiconductor Ltd. This component functions as a power management integrated circuit (PMIC) with open drain or open collector output configuration. The device monitors a 3.3V threshold voltage and provides active low reset functionality. The part is currently in active product status with 17,300 units available in stock. Equivalent and substitute parts are necessary to address supply chain flexibility, packaging format requirements, and inventory availability across multiple manufacturers and distribution channels.

Substiute Parts

XC6118N33AMR-G

Torex Semiconductor LtdIn Stock: 17330XC6118N33AMR-G Datasheet

Current PartRFQ

S-1000N33-M5T1U

ABLIC Inc.In Stock: 1254S-1000N33-M5T1U Datasheet

Parametric EquivalentRFQ

S-1002NA33I-M5T1U

ABLIC Inc.In Stock: 1283S-1002NA33I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1009N33I-M5T1U

ABLIC Inc.In Stock: 771S-1009N33I-M5T1U Datasheet

Parametric EquivalentRFQ

S-80833CNMC-B8ST2U

ABLIC Inc.In Stock: 1052S-80833CNMC-B8ST2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XC6118N33AMR-G is determined by strict parametric matching across the following critical criteria:

Mandatory Matching Parameters:

• Single-channel voltage detector functionality
• 3.3V voltage threshold
• Open drain or open collector output configuration
• Active low reset operation
• Operating temperature range of -40°C ~ 85°C
• Surface mount technology
• SC-74A / SOT-753 package footprint compatibility
• ROHS3 compliance
• MSL rating of 1 (Unlimited)

All substitute parts listed maintain electrical and mechanical compatibility with the XC6118N33AMR-G across these parameters. Packaging format (Tape & Reel versus Cut Tape) and manufacturer differences do not affect functional substitution capability. All substitute parts are manufactured by ABLIC Inc. and are in active product status.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts are functionally equivalent to the XC6118N33AMR-G and meet the same electrical and mechanical specifications. Selection among these alternatives should be based on the following factors:

Packaging Format Considerations: The XC6118N33AMR-G is supplied in Tape & Reel format. Direct format compatibility is maintained with S-1009N33I-M5T1U and S-80833CNMC-B8ST2U, both supplied in Tape & Reel. The S-1000N33-M5T1U and S-1002NA33I-M5T1U are supplied in Cut Tape format and require alternative handling procedures.

Compliance and Certification: All substitute parts maintain ROHS3 compliance, REACH unaffected status, and identical ECCN and HTSUS classifications. All parts carry MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions.

Manufacturer Availability: The XC6118N33AMR-G is manufactured by Torex Semiconductor Ltd with 17,300 units in stock. ABLIC Inc. substitute parts provide alternative sourcing with varying inventory levels: S-1009N33I-M5T1U (714 Pcs), S-80833CNMC-B8ST2U (976 Pcs), S-1000N33-M5T1U (1,168 Pcs), and S-1002NA33I-M5T1U (1,243 Pcs).

Product Status: All parts maintain active product status, ensuring continued availability and manufacturer support.

Frequently Asked Questions (FAQ)

Q: Can S-1000N33-M5T1U replace XC6118N33AMR-G in a production assembly?

A: Yes. The S-1000N33-M5T1U is a parametric equivalent with identical electrical specifications, voltage threshold, output configuration, and operating temperature range. The primary difference is packaging format (Cut Tape versus Tape & Reel) and supplier device package designation (SOT-23-5 versus SOT-25-5). Both designations reference the same SC-74A / SOT-753 physical footprint. Assembly compatibility is maintained.

Q: What is the difference between SOT-25-5 and SOT-23-5 designations?

A: Both designations refer to the same physical package footprint (SC-74A, SOT-753) with five leads. The designations reflect different supplier naming conventions. The mechanical and electrical pin configurations are identical, ensuring direct PCB footprint compatibility.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts, including the XC6118N33AMR-G, maintain ROHS3 compliance. All parts are REACH unaffected and carry identical ECCN (EAR99) and HTSUS (8542.39.0001) classifications.

Q: Which substitute part should be selected for Tape & Reel supply continuity?

A: S-1009N33I-M5T1U and S-80833CNMC-B8ST2U are supplied in Tape & Reel format, matching the XC6118N33AMR-G packaging. S-1000N33-M5T1U and S-1002NA33I-M5T1U are supplied in Cut Tape format and require alternative handling and assembly procedures.

Q: Do all substitute parts have the same moisture sensitivity rating?

A: Yes. All parts, including the XC6118N33AMR-G, carry MSL rating of 1 (Unlimited), indicating no moisture sensitivity restrictions and unlimited shelf life under standard storage conditions.

Q: Are there any functional differences in reset behavior between the main part and substitutes?

A: No. All parts implement active low reset operation with identical functional behavior. Reset timeout specifications are not provided for any part in this product category.

Q: Can these parts be used interchangeably in existing designs?

A: Yes. All substitute parts maintain identical electrical specifications, voltage threshold (3.3V), output configuration (open drain or open collector), and operating temperature range (-40°C ~ 85°C). Direct substitution is supported at the circuit level.