XC6118N31AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118N31AMR-G is an active low voltage detector supervisor IC manufactured by Torex Semiconductor Ltd, designed for single-channel voltage monitoring applications. This Surface Mount Device (SMD) operates across the industrial temperature range of -40°C to 85°C and features an open drain or open collector output configuration. The component is classified as a Power Management PMIC and maintains Active product status with full RoHS3 compliance and REACH unaffected designation. Substitute parts are identified when equivalent electrical parameters, functional characteristics, and compliance certifications align with the original specification, enabling direct replacement in circuit designs where package compatibility is maintained.

Substiute Parts

XC6118N31AMR-G

Torex Semiconductor LtdIn Stock: 3351XC6118N31AMR-G Datasheet

Current PartRFQ

XC6118N31BMR-G

Torex Semiconductor LtdIn Stock: 1229XC6118N31BMR-G Datasheet

Parametric EquivalentRFQ

S-1009N31I-M5T1U

ABLIC Inc.In Stock: 10216S-1009N31I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6118N31AMR-G are identified based on strict electrical and mechanical parameter alignment. The substitution criteria are defined by the following key parameters:

Electrical Parameters:

• Single-channel voltage monitoring capability
• 3.1V voltage threshold setting
• Open drain or open collector output configuration
• Active low reset logic
• Operating temperature range of -40°C to 85°C

Mechanical & Compliance Parameters:

• Surface mount mounting type
• SC-74A or SOT-753 package family designation
• RoHS3 compliance status
• REACH unaffected classification
• Moisture sensitivity level 1 (unlimited)

Parts meeting all these criteria are classified as parametric equivalents and direct substitutes. Package variations within the SOT family (SOT-25-5 and SOT-23-5) are acceptable provided the pin configuration and electrical characteristics remain functionally identical.

Parameter Comparison

Engineering Selection Recommendations

All three parts—XC6118N31AMR-G, XC6118N31BMR-G, and S-1009N31I-M5T1U—maintain Active product status and satisfy RoHS3 and REACH compliance requirements. Selection between these voltage detector supervisors is determined by availability and package footprint requirements.

XC6118N31AMR-G (Primary Part): Torex Semiconductor Ltd manufacture with SOT-25-5 package configuration. Inventory availability: 3300 units.

XC6118N31BMR-G (Torex Equivalent): Identical electrical specifications and package designation to the primary part. Torex Semiconductor Ltd manufacture. Inventory availability: 1219 units. Direct substitution without circuit modification.

S-1009N31I-M5T1U (Cross-Manufacturer Equivalent): ABLIC Inc. manufacture with SOT-23-5 package configuration. Maintains all electrical parameters and compliance certifications. Inventory availability: 10120 units. Package footprint differs from primary part; PCB layout verification required prior to implementation.

Frequently Asked Questions (FAQ)

Q: Can XC6118N31BMR-G replace XC6118N31AMR-G without circuit modification?

A: Yes. Both parts are manufactured by Torex Semiconductor Ltd with identical electrical specifications, voltage threshold (3.1V), output configuration (open drain or open collector), reset logic (active low), and operating temperature range (-40°C to 85°C). Both use SOT-25-5 package configuration. Direct substitution is supported.

Q: What is the difference between SOT-25-5 and SOT-23-5 packages?

A: SOT-25-5 and SOT-23-5 are distinct package designations within the SOT family. Both are surface mount packages with five pins and SC-74A or SOT-753 case dimensions. The primary difference lies in pin spacing and footprint geometry. PCB layout compatibility must be verified before substituting S-1009N31I-M5T1U (SOT-23-5) for XC6118N31AMR-G (SOT-25-5).

Q: Are all three parts RoHS3 compliant?

A: Yes. XC6118N31AMR-G, XC6118N31BMR-G, and S-1009N31I-M5T1U all carry RoHS3 Compliant designation and REACH Unaffected status.

Q: What voltage threshold do these supervisor ICs monitor?

A: All three parts monitor a 3.1V voltage threshold. This parameter is identical across XC6118N31AMR-G, XC6118N31BMR-G, and S-1009N31I-M5T1U.

Q: Can these parts be used interchangeably in high-temperature applications?

A: All three parts operate across the identical temperature range of -40°C to 85°C (TA). Selection is not differentiated by temperature performance.

Q: What is the moisture sensitivity level for these components?

A: All three parts carry Moisture Sensitivity Level (MSL) 1, indicating unlimited shelf life without moisture control requirements.

Q: Which manufacturer should I select for supply chain continuity?

A: XC6118N31AMR-G and XC6118N31BMR-G are both Torex Semiconductor Ltd products, supporting supply chain consistency within the same manufacturer. S-1009N31I-M5T1U is manufactured by ABLIC Inc. and represents a cross-manufacturer alternative.