XC6118N14AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118N14AMR-G is a single-channel voltage supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This device functions as a voltage detector with open drain or open collector output, designed to monitor supply voltage and generate an active-low reset signal. The part is currently in active product status with RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Finding equivalent substitute parts is necessary to ensure supply chain flexibility, manage inventory across multiple suppliers, and maintain design continuity when the primary part becomes unavailable.

Substiute Parts

XC6118N14AMR-G

Torex Semiconductor LtdIn Stock: 1107XC6118N14AMR-G Datasheet

Current PartRFQ

S-1009N14I-M5T1U

ABLIC Inc.In Stock: 897S-1009N14I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XC6118N14AMR-G is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Number of Voltages Monitored: 1 channel
• Voltage - Threshold: 1.4V
• Output Type: Open Drain or Open Collector
• Reset Logic: Active Low
• Operating Temperature Range: -40°C ~ 85°C (TA)
• Mounting Type: Surface Mount
• Product Status: Active

Compliance & Regulatory Parameters:

• RoHS3 Compliance
• REACH Unaffected status
• Moisture Sensitivity Level (MSL): 1

Package Compatibility: The XC6118N14AMR-G uses SOT-25-5 supplier device package (SC-74A, SOT-753 case). Substitute parts must accommodate the same pinout and footprint requirements for direct board-level replacement.

The S-1009N14I-M5T1U from ABLIC Inc. meets all mandatory electrical and functional parameters, with identical voltage threshold, output configuration, reset behavior, and operating temperature specifications. Both parts are active products with equivalent compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Primary Part: XC6118N14AMR-G

The XC6118N14AMR-G remains the primary selection when available. This part is actively manufactured by Torex Semiconductor Ltd with confirmed inventory of 1013 pieces in stock. It carries full RoHS3 compliance and REACH unaffected status, meeting all regulatory requirements for industrial and commercial applications.

Substitute Part: S-1009N14I-M5T1U

The S-1009N14I-M5T1U from ABLIC Inc. is a direct functional equivalent suitable for applications where XC6118N14AMR-G supply is constrained. This substitute maintains identical electrical specifications across all critical parameters: 1.4V threshold voltage, active-low reset output, open drain or open collector configuration, and -40°C to 85°C operating temperature range. Both parts share SC-74A (SOT-753) case designation with compatible pinout.

Compliance Verification:

Both parts are RoHS3 compliant and REACH unaffected, ensuring regulatory compliance for end-use applications. Both carry MSL 1 (unlimited) moisture sensitivity rating, indicating no special handling requirements during storage or assembly.

Packaging Consideration:

The primary part is supplied in Tape & Reel (TR) format, while the substitute is available in Cut Tape (CT) format. This difference affects procurement and assembly logistics but does not impact electrical or functional compatibility.

Frequently Asked Questions (FAQ)

Q: Can S-1009N14I-M5T1U be used as a direct replacement for XC6118N14AMR-G?

A: Yes. Both parts are single-channel voltage detectors with identical 1.4V threshold voltage, active-low reset output, open drain or open collector configuration, and -40°C to 85°C operating temperature range. The SC-74A (SOT-753) package and pinout are compatible, enabling direct board-level substitution.

Q: Are there differences in the supplier device package designation?

A: The XC6118N14AMR-G uses SOT-25-5 package designation, while the S-1009N14I-M5T1U uses SOT-23-5. Both designations refer to the same physical case style (SC-74A, SOT-753) with identical pinout and footprint. The package designation difference reflects manufacturer nomenclature conventions and does not affect compatibility.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both the XC6118N14AMR-G and S-1009N14I-M5T1U are RoHS3 compliant and REACH unaffected. Both carry MSL 1 (unlimited) moisture sensitivity rating, requiring no special handling during storage or assembly processes.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging supplies components on continuous tape in reel format, suitable for high-volume automated assembly. Cut Tape (CT) packaging supplies components on tape segments, typically used for lower-volume orders or manual assembly. This difference affects procurement and assembly logistics but does not impact component functionality or electrical performance.

Q: Are there any temperature or operating condition limitations that differ between these parts?

A: No. Both parts operate across the identical temperature range of -40°C to 85°C (TA). All electrical specifications, including voltage threshold, output behavior, and reset timing, remain consistent across this operating range for both parts.

Q: Can these parts be used interchangeably in new designs?

A: Yes. Both parts meet identical functional and electrical specifications. New designs may select either part based on supplier availability, packaging preference, and procurement lead times. No design modifications are required when switching between these parts.