XC6118N10BMR-G Equivalent & Substitute Parts

Part Overview

The XC6118N10BMR-G is a voltage detector supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This single-channel supervisor operates as an open drain or open collector output device with active low reset functionality. The device is designed for system monitoring applications requiring voltage threshold detection at 1V. The XC6118N10BMR-G maintains active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical parameters, functional characteristics, and compliance certifications align with the original specification, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

XC6118N10BMR-G

Torex Semiconductor LtdIn Stock: 974XC6118N10BMR-G Datasheet

Current PartRFQ

XC6118N10AMR-G

Torex Semiconductor LtdIn Stock: 1152XC6118N10AMR-G Datasheet

Parametric EquivalentRFQ

S-1004NA10I-M5T1U

ABLIC Inc.In Stock: 1028S-1004NA10I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1009N10I-M5T1U

ABLIC Inc.In Stock: 1240S-1009N10I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6118N10BMR-G are identified based on strict parametric equivalence across the following critical criteria:

Functional Equivalence Parameters:

• Single-channel voltage detector with 1V threshold detection
• Open drain or open collector output configuration
• Active low reset function
• Operating temperature range of -40°C to 85°C

Compliance & Environmental Parameters:

• RoHS3 compliance certification
• MSL 1 (unlimited moisture sensitivity)
• REACH unaffected status
• EAR99 export classification

Physical & Packaging Parameters:

• Surface mount technology
• SC-74A / SOT-753 package family (includes SOT-25-5 and SOT-23-5 variants)

All identified substitute parts maintain identical electrical specifications and compliance certifications. Packaging variants (SOT-25-5 versus SOT-23-5) represent different physical implementations within the same SC-74A / SOT-753 family, both suitable for surface mount assembly with equivalent pin functionality.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute (Same Manufacturer, Same Package): XC6118N10AMR-G is the direct parametric equivalent from Torex Semiconductor Ltd, maintaining identical electrical specifications and SOT-25-5 packaging. This part shares the same base product number (XC6118) and offers the highest compatibility with existing circuit designs. Selection of this substitute requires no PCB layout modifications.

Alternative Substitutes (Different Manufacturer, Package Variant): S-1004NA10I-M5T1U and S-1009N10I-M5T1U are manufactured by ABLIC Inc. and implement the same functional specifications within SOT-23-5 packaging. Both parts maintain full electrical equivalence and compliance certifications. Selection of these alternatives requires verification of PCB footprint compatibility, as SOT-23-5 represents a different physical implementation within the SC-74A / SOT-753 family compared to SOT-25-5.

Selection Criteria:

• All substitute parts maintain active product status with confirmed availability
• All parts carry ROHS3 compliance and MSL 1 certification
• Packaging selection (SOT-25-5 versus SOT-23-5) depends on existing PCB design constraints
• Manufacturer selection (Torex versus ABLIC) depends on supply chain and qualification requirements

Frequently Asked Questions (FAQ)

Q: Can XC6118N10AMR-G directly replace XC6118N10BMR-G without PCB modifications?

A: Yes. XC6118N10AMR-G is a parametric equivalent with identical electrical specifications, operating temperature range, output configuration, and SOT-25-5 packaging. No PCB layout changes are required for direct substitution.

Q: What is the difference between SOT-25-5 and SOT-23-5 packages?

A: Both packages belong to the SC-74A / SOT-753 family and provide equivalent electrical functionality. SOT-25-5 and SOT-23-5 differ in physical dimensions and pin spacing. PCB footprints are not interchangeable; verify your design uses the correct footprint before selecting a substitute with a different package variant.

Q: Are ABLIC Inc. parts (S-1004NA10I-M5T1U and S-1009N10I-M5T1U) fully equivalent to Torex parts?

A: Yes, from an electrical and functional standpoint. Both ABLIC parts maintain identical voltage threshold (1V), output configuration (open drain/collector), reset function (active low), operating temperature range (-40°C to 85°C), and compliance certifications (ROHS3, MSL 1). Package variant differences require PCB footprint verification.

Q: What compliance certifications apply to all substitute parts?

A: All substitute parts carry ROHS3 compliance, MSL 1 (unlimited moisture sensitivity), REACH unaffected status, and EAR99 export classification. These certifications are equivalent across all identified substitutes.

Q: Can I use S-1009N10I-M5T1U instead of S-1004NA10I-M5T1U?

A: Yes. Both ABLIC parts are parametric equivalents with identical electrical specifications and SOT-23-5 packaging. Selection between these two depends on supply availability and inventory requirements, as both maintain active product status.

Q: What should I verify before implementing a substitute part?

A: Verify PCB footprint compatibility with the selected package variant (SOT-25-5 or SOT-23-5). Confirm that your circuit design does not include manufacturer-specific features or device-specific firmware dependencies. All electrical parameters, compliance certifications, and functional characteristics are equivalent across identified substitutes.