XC6118N09AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118N09AMR-G is an active low voltage detector supervisor integrated circuit manufactured by Torex Semiconductor Ltd. This single-channel power management IC operates as an open drain or open collector output device with a 0.9V threshold voltage. The device is classified as a voltage detector within the Power Management (PMIC) category and is housed in a SOT-25-5 surface mount package.

The XC6118N09AMR-G maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when equivalent electrical performance and functional characteristics are required, particularly when the primary part experiences supply constraints or when alternative packaging formats are preferred for manufacturing optimization.

Substiute Parts

XC6118N09AMR-G

Torex Semiconductor LtdIn Stock: 1053XC6118N09AMR-G Datasheet

Current PartRFQ

S-1009N09I-M5T1U

ABLIC Inc.In Stock: 1031S-1009N09I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the XC6118N09AMR-G is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Single-channel voltage detector functionality
• 0.9V threshold voltage specification
• Open drain or open collector output configuration
• Active low reset logic
• Operating temperature range of -40°C to 85°C

Compliance & Regulatory Equivalence:

• RoHS3 compliance status
• REACH unaffected classification
• Moisture sensitivity level MSL 1 (unlimited)

Functional Equivalence:

• Voltage detector device type classification
• Power Management (PMIC) category
• Surface mount technology

The substitute part S-1009N09I-M5T1U from ABLIC Inc. meets all electrical, functional, and compliance criteria. The primary distinction between the main part and substitute is the packaging format: the XC6118N09AMR-G utilizes SOT-25-5 tape and reel packaging, while the S-1009N09I-M5T1U is supplied in SOT-23-5 cut tape format. Both packages are mechanically and electrically compatible for the specified application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the XC6118N09AMR-G and S-1009N09I-M5T1U are Active status products with full RoHS3 compliance and REACH unaffected classification, confirming regulatory alignment for current and future manufacturing requirements.

Selection based on supply and packaging requirements:

The XC6118N09AMR-G (Torex Semiconductor Ltd) is the primary specification when tape and reel packaging is required for automated assembly processes. Current inventory status shows 944 pieces in stock.

The S-1009N09I-M5T1U (ABLIC Inc.) serves as a direct functional equivalent when cut tape packaging is acceptable or preferred. This substitute maintains identical electrical performance and compliance certifications. Current inventory status shows 983 pieces in stock.

Both devices are suitable for direct substitution in applications requiring single-channel voltage detection at 0.9V threshold with active low reset output. The selection between these parts should be based on packaging format requirements, supply chain availability, and manufacturing process specifications rather than electrical performance differences.

Frequently Asked Questions (FAQ)

Q: Can the S-1009N09I-M5T1U replace the XC6118N09AMR-G in existing designs?

A: Yes. The S-1009N09I-M5T1U is electrically and functionally equivalent to the XC6118N09AMR-G. Both devices feature identical voltage threshold (0.9V), output configuration (open drain or open collector), reset logic (active low), and operating temperature range (-40°C to 85°C). The primary difference is packaging format: tape and reel versus cut tape.

Q: Are there any package compatibility concerns between these parts?

A: Both parts use the same physical package type (SC-74A, SOT-753) with identical pin configurations. The difference lies in the supply format: the XC6118N09AMR-G is supplied on tape and reel, while the S-1009N09I-M5T1U is supplied on cut tape. This distinction affects procurement and assembly processes but not circuit-level compatibility.

Q: Do both parts meet current regulatory requirements?

A: Yes. Both the XC6118N09AMR-G and S-1009N09I-M5T1U are RoHS3 compliant and REACH unaffected. Both maintain Active product status, confirming ongoing manufacturer support and regulatory alignment.

Q: What is the moisture sensitivity rating for these devices?

A: Both parts carry MSL 1 (Unlimited) moisture sensitivity level, indicating no moisture-related handling restrictions during storage or assembly.

Q: Can these parts be used interchangeably in automated pick-and-place assembly?

A: Electrical and functional interchangeability is confirmed. However, packaging format differences (tape and reel versus cut tape) may require different feeder configurations in automated assembly equipment. Verify feeder compatibility with your assembly process specifications.

Q: Are there any differences in the threshold voltage specification between these parts?

A: No. Both devices are specified with a 0.9V threshold voltage. This parameter is identical across both the XC6118N09AMR-G and S-1009N09I-M5T1U.

Q: What is the reset timeout specification for these devices?

A: Reset timeout is not specified for either the XC6118N09AMR-G or S-1009N09I-M5T1U. Both devices feature active low reset logic without a defined timeout parameter.