XC6118C43AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C43AMR-G is a voltage detector supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This single-channel supervisor operates with a 4.3V threshold voltage and provides push-pull, totem pole output with active low reset functionality. The device is packaged in SOT-25-5 (SC-74A, SOT-753) surface mount configuration and is currently in active product status with RoHS3 compliance. Substitute parts are identified when equivalent electrical parameters and mechanical compatibility requirements are met across alternative manufacturers.

Substiute Parts

XC6118C43AMR-G

Torex Semiconductor LtdIn Stock: 1025XC6118C43AMR-G Datasheet

Current PartRFQ

S-1002CA43I-M5T1U

ABLIC Inc.In Stock: 908S-1002CA43I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1009C43I-M5T1U

ABLIC Inc.In Stock: 1064S-1009C43I-M5T1U Datasheet

Parametric EquivalentRFQ

S-80843CLMC-B64T2U

ABLIC Inc.In Stock: 1209S-80843CLMC-B64T2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6118C43AMR-G are qualified based on strict parameter equivalence in the following critical areas:

Electrical Parameters (Must Match):

• Voltage threshold: 4.3V
• Output configuration: Push-Pull, Totem Pole
• Reset polarity: Active Low
• Number of monitored voltages: 1 channel
• Operating temperature range: -40°C ~ 85°C (TA)

Mechanical Parameters (Must Match):

• Package type: SC-74A, SOT-753
• Mounting type: Surface Mount
• Pin count and configuration: SOT-25-5 or SOT-23-5 (functionally equivalent pinout)

Compliance Parameters (Must Match):

• RoHS3 Compliant
• REACH Unaffected
• ECCN: EAR99
• HTSUS: 8542.39.0001

All three substitute parts (S-1002CA43I-M5T1U, S-1009C43I-M5T1U, S-80843CLMC-B64T2U) meet these criteria and are manufactured by ABLIC Inc. Substitution is valid when all electrical, mechanical, and compliance parameters align with the original specification.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are functionally equivalent to the XC6118C43AMR-G based on electrical and mechanical parameter alignment. Selection among these alternatives should be based on the following factors:

Packaging Format Consideration: The XC6118C43AMR-G is supplied in Tape & Reel (TR) format. Among substitutes, S-1009C43I-M5T1U and S-80843CLMC-B64T2U are also supplied in Tape & Reel format, while S-1002CA43I-M5T1U is supplied in Cut Tape (CT) format. For high-volume production requiring automated assembly, TR packaging is preferred.

Inventory Availability: All parts maintain active product status with current inventory. S-80843CLMC-B64T2U has the highest inventory level (1127 Pcs), followed by S-1009C43I-M5T1U (985 Pcs) and S-1002CA43I-M5T1U (866 Pcs).

Compliance Certification: All substitute parts maintain identical compliance status: RoHS3 Compliant, REACH Unaffected, ECCN EAR99, and HTSUS 8542.39.0001. No compliance advantage exists among alternatives.

Manufacturer Continuity: Substitution involves transition from Torex Semiconductor Ltd to ABLIC Inc. Both manufacturers produce equivalent voltage detector supervisors with identical electrical specifications and package compatibility.

Frequently Asked Questions (FAQ)

Q: Can S-1002CA43I-M5T1U replace XC6118C43AMR-G in production?

A: Yes. S-1002CA43I-M5T1U meets all electrical and mechanical parameter requirements. The primary difference is packaging format (Cut Tape vs. Tape & Reel). For manual assembly or small-batch operations, Cut Tape packaging is acceptable. For automated high-volume production, Tape & Reel format is preferred.

Q: What is the difference between SOT-25-5 and SOT-23-5 packages?

A: Both packages use the SC-74A, SOT-753 physical form factor with identical pin configuration and spacing. SOT-25-5 and SOT-23-5 designations refer to supplier-specific package naming conventions but represent functionally equivalent mechanical packages suitable for the same PCB footprint.

Q: Are all substitute parts from the same manufacturer?

A: Yes. All three substitute parts (S-1002CA43I-M5T1U, S-1009C43I-M5T1U, S-80843CLMC-B64T2U) are manufactured by ABLIC Inc. The original part is manufactured by Torex Semiconductor Ltd.

Q: Do substitute parts have the same operating temperature range?

A: Yes. All substitute parts operate across the identical temperature range of -40°C ~ 85°C (TA), matching the original XC6118C43AMR-G specification.

Q: Which substitute part should be selected for maximum inventory availability?

A: S-80843CLMC-B64T2U offers the highest current inventory level at 1127 Pcs. This part is supplied in Tape & Reel format, matching the original packaging preference.

Q: Are there any differences in RoHS or REACH compliance between the original and substitute parts?

A: No. All parts maintain identical compliance status: RoHS3 Compliant, REACH Unaffected, ECCN EAR99, and HTSUS 8542.39.0001.

Q: Can substitute parts be mixed in the same production batch?

A: Yes. All three substitute parts are electrically and mechanically equivalent. However, maintaining single-part sourcing per production batch is recommended for traceability and supply chain documentation purposes.