XC6118C40AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C40AMR-G is an active-low voltage detector supervisor integrated circuit manufactured by Torex Semiconductor Ltd. This single-channel PMIC operates as a push-pull, totem-pole output device with a 4V threshold voltage and is housed in a SOT-25-5 surface-mount package. The device is classified as a voltage detector within the power management category and maintains active product status with full RoHS3 compliance.

Substitute parts are identified when equivalent electrical and mechanical parameters align with the main part specification, enabling direct functional replacement in circuit applications. Alternative sources and packaging formats may be required due to inventory availability, supply chain considerations, or design flexibility requirements.

Substiute Parts

XC6118C40AMR-G

Torex Semiconductor LtdIn Stock: 991XC6118C40AMR-G Datasheet

Current PartRFQ

S-1000C40-M5T1U

ABLIC Inc.In Stock: 3825S-1000C40-M5T1U Datasheet

Parametric EquivalentRFQ

S-1002CA40I-M5T1U

ABLIC Inc.In Stock: 944S-1002CA40I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1009C40I-M5T1U

ABLIC Inc.In Stock: 4193S-1009C40I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XC6118C40AMR-G is determined by strict alignment of the following electrical and mechanical parameters:

Critical Matching Parameters:

• Single-channel voltage detector topology
• 4V threshold voltage specification
• Push-pull, totem-pole output configuration
• Active-low reset logic
• Operating temperature range of -40°C to 85°C
• Surface-mount technology
• SC-74A / SOT-753 package footprint compatibility
• RoHS3 compliance status
• MSL Level 1 rating

All identified substitute parts meet these criteria. Variations in packaging format (Tape & Reel versus Cut Tape) and supplier device package designation (SOT-25-5 versus SOT-23-5) do not affect functional equivalence, as both package types share identical SC-74A / SOT-753 physical footprints and pin configurations.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts—S-1000C40-M5T1U, S-1002CA40I-M5T1U, and S-1009C40I-M5T1U—are parametrically equivalent to the XC6118C40AMR-G and maintain active product status with full regulatory compliance.

Selection Criteria Based on Provided Parameters:

S-1000C40-M5T1U (ABLIC Inc.): This part is supplied in Tape & Reel format, matching the packaging format of the primary part. It is manufactured by ABLIC Inc. and carries the S-1000 base product number. All electrical specifications, compliance certifications, and operating parameters are identical to the XC6118C40AMR-G.

S-1009C40I-M5T1U (ABLIC Inc.): This part is also supplied in Tape & Reel format and represents the S-1009 series from ABLIC Inc. Electrical and compliance parameters are fully equivalent to the primary part.

S-1002CA40I-M5T1U (ABLIC Inc.): This part is supplied in Cut Tape format rather than Tape & Reel. The Cut Tape packaging format may be selected when smaller quantity requirements or alternative handling procedures are preferred. All electrical and compliance specifications remain equivalent.

All three substitute parts are RoHS3 compliant, REACH unaffected, and rated for the same operating temperature range. Selection between these options should be based on packaging format requirements, inventory availability, and supply chain logistics rather than electrical performance considerations.

Frequently Asked Questions (FAQ)

Q: Can S-1000C40-M5T1U, S-1002CA40I-M5T1U, and S-1009C40I-M5T1U be used interchangeably with XC6118C40AMR-G?

A: Yes. All three parts share identical electrical specifications, including 4V threshold voltage, push-pull totem-pole output, active-low reset logic, and -40°C to 85°C operating temperature range. The SC-74A / SOT-753 package footprint is common across all parts, enabling direct board-level substitution.

Q: What is the difference between Tape & Reel and Cut Tape packaging formats?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, suitable for high-volume automated assembly. Cut Tape packaging supplies components on cut segments of carrier tape, typically used for lower-volume applications or manual assembly. Both formats contain identical components with the same electrical performance and package footprint.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The XC6118C40AMR-G and all three substitute parts (S-1000C40-M5T1U, S-1002CA40I-M5T1U, S-1009C40I-M5T1U) are RoHS3 compliant and REACH unaffected.

Q: Do the substitute parts have the same moisture sensitivity rating?

A: Yes. All parts, including the primary XC6118C40AMR-G and the three substitutes, are rated at MSL Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: What determines whether a part can substitute for the XC6118C40AMR-G?

A: Substitution is determined by matching the following parameters: single-channel voltage detector topology, 4V threshold voltage, push-pull totem-pole output, active-low reset logic, -40°C to 85°C operating temperature, surface-mount technology, SC-74A / SOT-753 package footprint, RoHS3 compliance, and MSL Level 1 rating. All identified substitutes meet these criteria.

Q: Can I use S-1002CA40I-M5T1U (Cut Tape) in place of XC6118C40AMR-G (Tape & Reel)?

A: Yes. The packaging format difference does not affect functional equivalence. Both formats contain the same component with identical electrical specifications and physical footprint. Selection between formats depends on assembly process requirements and quantity needs.

Q: Are there any temperature or compliance differences between the main part and substitutes?

A: No. All parts operate across the identical temperature range of -40°C to 85°C and carry the same RoHS3 compliance and REACH unaffected status.