XC6118C34AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C34AMR-G is a voltage detector supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This single-channel supervisor operates with a 3.4V threshold voltage and provides push-pull, totem pole output with active low reset functionality. The device is housed in a SOT-25-5 package and is designed for surface mount applications across industrial and commercial temperature ranges (-40°C to 85°C). The part maintains Active product status with full RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent substitute parts are identified based on matching electrical specifications, output characteristics, and thermal operating parameters to ensure functional interchangeability in voltage monitoring applications.

Substiute Parts

XC6118C34AMR-G

Torex Semiconductor LtdIn Stock: 833XC6118C34AMR-G Datasheet

Current PartRFQ

S-1002CA34I-M5T1U

ABLIC Inc.In Stock: 985S-1002CA34I-M5T1U Datasheet

Parametric EquivalentRFQ

S-80834CLMC-B6TT2U

ABLIC Inc.In Stock: 1157S-80834CLMC-B6TT2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6118C34AMR-G are qualified based on strict electrical and mechanical parameter matching. The substitution criteria are defined by the following key parameters:

Critical Matching Parameters:

• Voltage Threshold: 3.4V (exact match required)
• Number of Voltages Monitored: 1 channel
• Output Configuration: Push-Pull, Totem Pole
• Reset Function: Active Low
• Operating Temperature Range: -40°C to 85°C
• Mounting Type: Surface Mount
• Package Classification: SC-74A, SOT-753 family
• RoHS3 Compliance: Required
• MSL Rating: 1 (Unlimited)

The identified substitute parts S-1002CA34I-M5T1U and S-80834CLMC-B6TT2U, both manufactured by ABLIC Inc., meet all critical electrical specifications and compliance requirements. Both substitutes operate identically within the specified voltage threshold, output topology, and temperature parameters. The primary distinction between the main part and substitutes is the supplier device package designation (SOT-23-5 versus SOT-25-5), which represents equivalent physical footprints within the SC-74A, SOT-753 classification suitable for direct board-level substitution.

Parameter Comparison

Engineering Selection Recommendations

Selection between the XC6118C34AMR-G and its substitute parts should be based on the following engineering criteria:

Product Status and Availability: All three parts maintain Active product status, ensuring continued manufacturing support and supply chain stability. Current inventory levels show 776 units for the XC6118C34AMR-G, 912 units for S-1002CA34I-M5T1U, and 1054 units for S-80834CLMC-B6TT2U.

Compliance and Regulatory: All parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for industrial applications. MSL 1 rating indicates unlimited shelf life under standard storage conditions.

Electrical Equivalence: The three parts are electrically identical across all specified parameters: 3.4V threshold voltage, single-channel monitoring, push-pull totem pole output, active low reset, and -40°C to 85°C operating range.

Packaging Considerations: The XC6118C34AMR-G uses SOT-25-5 packaging while both ABLIC substitutes use SOT-23-5 packaging. Both designations fall within the SC-74A, SOT-753 classification and are mechanically compatible for surface mount PCB applications. Verify PCB footprint compatibility with design specifications before final selection.

Supply Chain Strategy: ABLIC parts may be selected for supply chain diversification or when preferred supplier agreements exist. Torex parts maintain original design specifications and may be preferred for design continuity.

Frequently Asked Questions (FAQ)

Q: Can S-1002CA34I-M5T1U and S-80834CLMC-B6TT2U be used interchangeably with XC6118C34AMR-G?

A: Yes. All three parts meet identical electrical specifications for voltage threshold (3.4V), output configuration (push-pull totem pole), reset function (active low), and operating temperature range (-40°C to 85°C). Functional interchangeability is confirmed across these parameters.

Q: What is the difference between SOT-25-5 and SOT-23-5 packaging?

A: Both designations represent 5-pin surface mount packages within the SC-74A, SOT-753 classification. The primary difference is physical footprint dimensions. Verify that your PCB design accommodates the specific package variant before substitution.

Q: Are all three parts RoHS3 compliant?

A: Yes. XC6118C34AMR-G, S-1002CA34I-M5T1U, and S-80834CLMC-B6TT2U are all ROHS3 compliant and REACH unaffected, meeting current environmental regulations.

Q: What does MSL 1 (Unlimited) mean?

A: MSL 1 indicates the lowest moisture sensitivity level. These parts have unlimited shelf life under standard storage conditions and do not require special moisture control during handling or storage.

Q: Can I substitute based on manufacturer preference alone?

A: No. Substitution must be based on matching electrical and mechanical parameters. While all three parts are functionally equivalent, PCB footprint compatibility with the specific package variant (SOT-25-5 versus SOT-23-5) must be verified for each application.

Q: Are there any temperature or voltage derating considerations between these parts?

A: No. All three parts operate identically across the specified -40°C to 85°C temperature range with the same 3.4V threshold voltage. No derating or performance variation is specified across the provided parameters.

Q: What is the reset timeout specification?

A: Reset timeout is not specified for any of the three parts in the provided parameters. Consult detailed datasheets for timing specifications if required for your application.