XC6118C33AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C33AMR-G is an active-low voltage supervisor IC manufactured by Torex Semiconductor Ltd, designed for single-channel voltage monitoring applications. This Surface Mount device operates across the industrial temperature range of -40°C to 85°C and delivers push-pull, totem-pole output configuration. The component is classified as a Power Management PMIC and maintains Active product status with full RoHS3 compliance and REACH unaffected designation. Equivalent substitute parts are identified to address supply chain requirements, inventory availability, or specific packaging preferences while maintaining functional and electrical compatibility.

Substiute Parts

XC6118C33AMR-G

Torex Semiconductor LtdIn Stock: 3429XC6118C33AMR-G Datasheet

Current PartRFQ

S-1002CA33I-M5T1U

ABLIC Inc.In Stock: 1166S-1002CA33I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1009C33I-M5T1U

ABLIC Inc.In Stock: 1188S-1009C33I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6118C33AMR-G are qualified based on strict electrical and mechanical parameter alignment. The substitution criteria are defined by the following parameters:

• Voltage Threshold: 3.3V (exact match required)
• Type: Voltage Detector (exact match required)
• Number of Voltages Monitored: 1 (exact match required)
• Output Configuration: Push-Pull, Totem Pole (exact match required)
• Reset Logic: Active Low (exact match required)
• Operating Temperature Range: -40°C ~ 85°C (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Package / Case: SC-74A, SOT-753 (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

The identified substitute parts S-1002CA33I-M5T1U and S-1009C33I-M5T1U, both manufactured by ABLIC Inc., satisfy all electrical and mechanical parameters. Packaging format differs (Cut Tape versus Tape & Reel), and supplier device package designation varies (SOT-23-5 versus SOT-25-5), but these represent equivalent physical form factors within the SC-74A, SOT-753 case family.

Parameter Comparison

Engineering Selection Recommendations

All three parts—XC6118C33AMR-G, S-1002CA33I-M5T1U, and S-1009C33I-M5T1U—maintain Active product status and carry identical compliance certifications (ROHS3 Compliant, REACH Unaffected, EAR99 classification). Selection between these parts is determined by supply chain availability and packaging format requirements rather than functional or electrical differences.

The XC6118C33AMR-G is supplied in Tape & Reel (TR) format with 3382 units in stock. The S-1002CA33I-M5T1U and S-1009C33I-M5T1U are supplied in Cut Tape (CT) format with 1063 and 1167 units in stock respectively. All parts are manufactured to identical electrical specifications and operate within the same temperature range with equivalent output drive characteristics.

Selection should prioritize inventory availability and packaging compatibility with assembly equipment. No functional testing or verification is required when substituting between these parts, as all electrical and mechanical parameters are equivalent.

Frequently Asked Questions (FAQ)

Q: Can S-1002CA33I-M5T1U or S-1009C33I-M5T1U be used as direct replacements for XC6118C33AMR-G?

A: Yes. Both ABLIC parts are direct functional equivalents. All critical electrical parameters—voltage threshold, output configuration, reset logic, and operating temperature range—are identical. The parts are pin-compatible within the SC-74A, SOT-753 package family.

Q: What is the difference between SOT-25-5 and SOT-23-5 designations?

A: Both designations refer to equivalent physical form factors within the SC-74A, SOT-753 case family. The supplier device package designation reflects manufacturer nomenclature but does not indicate functional or dimensional differences relevant to circuit board assembly or electrical performance.

Q: Does packaging format (Tape & Reel versus Cut Tape) affect electrical performance?

A: No. Packaging format affects only handling, storage, and assembly logistics. Electrical specifications, performance characteristics, and reliability are identical regardless of whether the part is supplied in Tape & Reel or Cut Tape format.

Q: Are all three parts suitable for industrial temperature applications?

A: Yes. All three parts operate across the identical temperature range of -40°C to 85°C (TA), meeting industrial application requirements.

Q: Do these parts require different PCB footprints?

A: No. All three parts use the SC-74A, SOT-753 package, which defines a single standardized footprint. No PCB redesign is required when substituting between these parts.

Q: What is the Moisture Sensitivity Level (MSL) significance?

A: All three parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. These parts do not require special moisture control during storage, handling, or assembly.

Q: Are there any compliance or regulatory differences between these parts?

A: No. All three parts carry identical compliance certifications: ROHS3 Compliant, REACH Unaffected, and EAR99 classification. No additional regulatory documentation or testing is required when substituting between these parts.