XC6118C30AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C30AMR-G is a voltage detector supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This single-channel supervisor operates as a push-pull, totem pole output device with active low reset functionality. The device is designed for applications requiring voltage monitoring and system reset control across industrial and consumer electronics platforms.

The XC6118C30AMR-G maintains Active product status with full RoHS3 compliance and REACH unaffected classification. Substitute parts are identified based on matching electrical parameters, output topology, and thermal operating ranges. Alternative models are necessary to accommodate supply chain variations, packaging preferences, and inventory availability while maintaining functional equivalence.

Substiute Parts

XC6118C30AMR-G

Torex Semiconductor LtdIn Stock: 3131XC6118C30AMR-G Datasheet

Current PartRFQ

XC6118C30BMR-G

Torex Semiconductor LtdIn Stock: 1147XC6118C30BMR-G Datasheet

Parametric EquivalentRFQ

S-1000C30-M5T1U

ABLIC Inc.In Stock: 4057S-1000C30-M5T1U Datasheet

Parametric EquivalentRFQ

S-1002CA30I-M5T1U

ABLIC Inc.In Stock: 3349S-1002CA30I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1003CA30I-M5T1U

ABLIC Inc.In Stock: 1031S-1003CA30I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1004CA30I-M5T1U

ABLIC Inc.In Stock: 890S-1004CA30I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1009C30I-M5T1U

ABLIC Inc.In Stock: 1219S-1009C30I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XC6118C30AMR-G is determined by strict parameter matching across the following criteria:

Mandatory Matching Parameters:

• Voltage Threshold: 3V
• Number of Voltages Monitored: 1
• Output Configuration: Push-Pull, Totem Pole
• Reset Logic: Active Low
• Operating Temperature Range: -40°C ~ 85°C (TA)
• Mounting Type: Surface Mount
• Package / Case: SC-74A, SOT-753
• RoHS Status: RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

All identified substitute parts meet these electrical and mechanical requirements. Variations in packaging format (Tape & Reel versus Cut Tape) and supplier device package designation (SOT-25-5 versus SOT-23-5) do not affect functional equivalence, as both represent the same physical form factor with identical pin configurations and electrical characteristics.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain Active product status and full RoHS3 compliance, ensuring regulatory alignment with the original XC6118C30AMR-G specification. Selection between equivalent models should be based on the following factors:

Manufacturer Continuity: The XC6118C30BMR-G provides direct manufacturer equivalence from Torex Semiconductor Ltd, maintaining supply chain consistency with the primary part.

Packaging Format Availability: Tape & Reel (TR) formatted parts—S-1000C30-M5T1U and S-1009C30I-M5T1U—are suitable for high-volume automated assembly operations. Cut Tape (CT) formatted parts—S-1002CA30I-M5T1U, S-1003CA30I-M5T1U, and S-1004CA30I-M5T1U—accommodate lower-volume or mixed-component procurement scenarios.

Inventory Levels: S-1000C30-M5T1U (3975 Pcs) and S-1002CA30I-M5T1U (3280 Pcs) offer the highest stock availability for immediate deployment. XC6118C30BMR-G (1058 Pcs) and S-1009C30I-M5T1U (1168 Pcs) provide secondary sourcing options with moderate availability.

Cross-Manufacturer Sourcing: ABLIC Inc. S-series devices provide alternative sourcing from a qualified manufacturer, reducing single-source dependency while maintaining identical electrical and thermal performance characteristics.

Frequently Asked Questions (FAQ)

Q: Can S-1000C30-M5T1U replace XC6118C30AMR-G in production assemblies?

A: Yes. The S-1000C30-M5T1U meets all mandatory electrical parameters: 3V threshold, single-channel monitoring, push-pull totem pole output, active low reset, and -40°C to 85°C operating range. Both devices use SC-74A, SOT-753 package form factors with identical pin configurations. Functional substitution is direct.

Q: What is the difference between Tape & Reel and Cut Tape packaging formats?

A: Tape & Reel (TR) packaging is optimized for automated pick-and-place assembly systems and high-volume production runs. Cut Tape (CT) packaging provides individual component access and is suitable for manual assembly, prototyping, or lower-volume applications. Electrical and thermal performance are identical between formats.

Q: Are SOT-25-5 and SOT-23-5 designations interchangeable?

A: Yes. Both designations reference the same physical package form factor with five leads in a surface-mount configuration. The SC-74A, SOT-753 package classification confirms mechanical and electrical compatibility across all listed parts.

Q: Does switching from Torex to ABLIC affect system reliability?

A: No. All substitute parts maintain identical RoHS3 compliance, Moisture Sensitivity Level 1 (Unlimited), and Active product status. Both manufacturers meet the same regulatory and environmental standards. Electrical performance across voltage threshold, output topology, and thermal range is functionally equivalent.

Q: Which substitute part offers the best inventory availability?

A: S-1000C30-M5T1U provides the highest stock level at 3975 Pcs in Tape & Reel format, suitable for immediate high-volume deployment. S-1002CA30I-M5T1U offers 3280 Pcs in Cut Tape format for alternative packaging requirements.

Q: Can multiple substitute parts be used interchangeably within the same design?

A: Yes. All listed substitutes are parametrically equivalent and pin-compatible. PCB layout and schematic integration remain unchanged. Component selection can be determined by packaging format preference, inventory availability, and supply chain sourcing strategy without design modification.