XC6118C29AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C29AMR-G is a voltage detector supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This single-channel supervisor operates with a 2.9V threshold voltage and provides push-pull, totem pole output with active low reset functionality. The device is packaged in SOT-25-5 (SC-74A, SOT-753) surface mount configuration and is currently in active product status with full RoHS3 compliance.

Substitute parts are necessary when the original XC6118C29AMR-G becomes unavailable, when alternative packaging formats are required for manufacturing optimization, or when supply chain diversification is needed while maintaining identical electrical and mechanical performance specifications.

Substiute Parts

XC6118C29AMR-G

Torex Semiconductor LtdIn Stock: 778XC6118C29AMR-G Datasheet

Current PartRFQ

S-1000C29-M5T1U

ABLIC Inc.In Stock: 1123S-1000C29-M5T1U Datasheet

Parametric EquivalentRFQ

S-1002CA29I-M5T1U

ABLIC Inc.In Stock: 1038S-1002CA29I-M5T1U Datasheet

Parametric EquivalentRFQ

S-80829CLMC-B6OT2U

ABLIC Inc.In Stock: 1059S-80829CLMC-B6OT2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XC6118C29AMR-G is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Requirements:

• Voltage threshold: 2.9V (exact match required)
• Output type: Push-Pull, Totem Pole (exact match required)
• Reset polarity: Active Low (exact match required)
• Number of monitored voltages: 1 channel (exact match required)
• Operating temperature range: -40°C ~ 85°C (exact match required)

Mechanical & Compliance Equivalence Requirements:

• Package type: SC-74A, SOT-753 (exact match required)
• Mounting type: Surface Mount (exact match required)
• RoHS3 compliance (required)
• MSL rating: 1 (Unlimited) (exact match required)
• REACH unaffected status (required)

All three substitute parts listed below meet these strict equivalence criteria. Packaging format differences (Tape & Reel versus Cut Tape) do not affect electrical or mechanical compatibility and represent only supply chain variations.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are functionally and mechanically equivalent to the XC6118C29AMR-G and are suitable for direct replacement in applications requiring a 2.9V single-channel voltage detector with push-pull totem pole output and active low reset.

Selection Criteria Based on Provided Data:

For Tape & Reel Packaging Requirement: Select S-80829CLMC-B6OT2U (ABLIC Inc.) to maintain identical packaging format (Tape & Reel) as the original XC6118C29AMR-G. This part is in active status with 987 pcs inventory available.

For Cut Tape Packaging Requirement: Select either S-1000C29-M5T1U or S-1002CA29I-M5T1U (both ABLIC Inc.). S-1000C29-M5T1U offers 1028 pcs inventory; S-1002CA29I-M5T1U offers 956 pcs inventory. Both are in active status.

For Supply Chain Diversification: All three substitute parts are manufactured by ABLIC Inc., providing an alternative to the original Torex Semiconductor Ltd source while maintaining full electrical and mechanical equivalence. All parts carry identical compliance certifications (RoHS3, REACH unaffected, MSL 1).

Frequently Asked Questions (FAQ)

Q: Can S-1000C29-M5T1U replace XC6118C29AMR-G in existing PCB designs?

A: Yes. Both parts share identical electrical specifications (2.9V threshold, push-pull totem pole output, active low reset, 1-channel configuration) and mechanical compatibility (SC-74A/SOT-753 package, surface mount). The supplier device package designation differs (SOT-25-5 versus SOT-23-5), but both conform to the same physical case standard. No PCB redesign is required.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) and Cut Tape (CT) are supply format variations only. Both formats contain identical components in the same physical package. Tape & Reel is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape is supplied as individual segments. Electrical and mechanical performance are identical.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. XC6118C29AMR-G and all three substitute parts (S-1000C29-M5T1U, S-1002CA29I-M5T1U, S-80829CLMC-B6OT2U) are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Q: Can I mix substitute parts from different manufacturers in the same production run?

A: Yes. All substitute parts meet identical electrical and mechanical specifications. However, manufacturing best practices recommend consistency within a single production batch to simplify quality control and traceability documentation.

Q: What is the MSL rating and why does it matter?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life without moisture control requirements. All parts in this equivalence group carry MSL 1 rating, meaning they can be stored and handled under standard conditions without special moisture-barrier packaging or baking procedures prior to assembly.

Q: Are there any temperature or operating condition differences between these parts?

A: No. All parts operate identically across the -40°C to 85°C temperature range. Electrical performance, threshold accuracy, and output characteristics are equivalent across the full operating temperature specification.