XC6118C26AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C26AMR-G is an active low voltage detector supervisor integrated circuit manufactured by Torex Semiconductor Ltd. This single-channel power management IC operates as a push-pull, totem pole output device with a 2.6V threshold voltage. The device is housed in a SOT-25-5 surface mount package and is designed for applications requiring voltage monitoring and reset signal generation.

The XC6118C26AMR-G maintains active product status with full RoHS3 compliance and unlimited moisture sensitivity rating. Equivalent substitute parts are available from ABLIC Inc. to support design flexibility, inventory management, and supply chain continuity for voltage detector applications requiring identical electrical and mechanical specifications.

Substiute Parts

XC6118C26AMR-G

Torex Semiconductor LtdIn Stock: 807XC6118C26AMR-G Datasheet

Current PartRFQ

S-1000C26-M5T1U

ABLIC Inc.In Stock: 2955S-1000C26-M5T1U Datasheet

Parametric EquivalentRFQ

S-1002CA26I-M5T1U

ABLIC Inc.In Stock: 1059S-1002CA26I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6118C26AMR-G are qualified based on strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Single-channel voltage detector topology
• 2.6V threshold voltage specification
• Push-pull, totem pole output configuration
• Active low reset signal logic
• Identical operating temperature range (-40°C to 85°C)

Mechanical & Compliance Equivalence Criteria:

• Surface mount technology
• SC-74A package designation (SOT-753)
• RoHS3 compliance certification
• Moisture sensitivity level 1 (unlimited)
• EAR99 export classification
• REACH unaffected status

The substitute parts S-1000C26-M5T1U and S-1002CA26I-M5T1U, both manufactured by ABLIC Inc., meet all specified electrical and mechanical parameters. These devices are functionally interchangeable with the XC6118C26AMR-G in applications requiring voltage supervision and reset generation at 2.6V threshold.

Parameter Comparison

Engineering Selection Recommendations

All three parts—XC6118C26AMR-G, S-1000C26-M5T1U, and S-1002CA26I-M5T1U—are active products with full regulatory compliance. Selection between these devices is based on availability, packaging format, and supply chain requirements rather than electrical or mechanical differences.

XC6118C26AMR-G (Torex Semiconductor Ltd): Primary device with 742 units in stock. Supplied in tape and reel packaging format. Recommended for new designs when Torex supply is available.

S-1000C26-M5T1U (ABLIC Inc.): Parametric equivalent with 2880 units in stock. Supplied in cut tape packaging format. Suitable for applications where ABLIC sourcing is preferred or when higher inventory availability is required.

S-1002CA26I-M5T1U (ABLIC Inc.): Parametric equivalent with 993 units in stock. Supplied in cut tape packaging format. Functionally identical to S-1000C26-M5T1U with alternative series designation (S-1002 vs. S-1000).

All three devices maintain identical electrical performance, temperature ratings, and compliance certifications. PCB layout and schematic integration remain unchanged across substitutions.

Frequently Asked Questions (FAQ)

Q: Are the ABLIC S-1000C26-M5T1U and S-1002CA26I-M5T1U devices truly interchangeable with the Torex XC6118C26AMR-G?

A: Yes. Both ABLIC devices meet all specified electrical parameters (2.6V threshold, push-pull output, active low reset, -40°C to 85°C operation) and mechanical requirements (SOT-25-5 package, surface mount, RoHS3 compliance). Pin-to-pin compatibility and functional behavior are identical.

Q: What is the difference between the S-1000C26-M5T1U and S-1002CA26I-M5T1U?

A: Both devices are parametric equivalents with identical electrical specifications and package format. The primary difference is the series designation (S-1000 vs. S-1002). Both are active products with full compliance certifications. Selection between them is based on inventory availability and supply chain preference.

Q: Does the packaging format difference (tape & reel vs. cut tape) affect electrical performance?

A: No. Packaging format affects only handling, storage, and assembly processes. Electrical specifications, performance characteristics, and reliability remain identical regardless of whether the device is supplied in tape and reel or cut tape format.

Q: Can I use these substitute parts in existing designs without PCB modifications?

A: Yes. All three devices share identical pin configurations, package designations (SC-74A, SOT-753), and electrical characteristics. No schematic or PCB layout changes are required for substitution.

Q: Are all three devices RoHS3 compliant?

A: Yes. The XC6118C26AMR-G, S-1000C26-M5T1U, and S-1002CA26I-M5T1U all carry RoHS3 compliance certification and are REACH unaffected. All devices meet current environmental and regulatory requirements.

Q: What is the moisture sensitivity rating for these devices?

A: All three devices carry moisture sensitivity level 1 (unlimited), indicating no moisture sensitivity restrictions during storage or handling. Standard PCB assembly processes are applicable without special precautions.