XC6118C24AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C24AMR-G is a voltage detector supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This single-channel supervisor operates with a 2.4V threshold voltage and provides push-pull, totem pole output with active low reset functionality. The device is packaged in SOT-25-5 (SC-74A, SOT-753) surface mount configuration and is currently in active product status with full RoHS3 compliance.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the same functional category. Alternative models become necessary due to inventory availability, supply chain optimization, or manufacturing discontinuation planning.

Substiute Parts

XC6118C24AMR-G

Torex Semiconductor LtdIn Stock: 770XC6118C24AMR-G Datasheet

Current PartRFQ

S-1002CA24I-M5T1U

ABLIC Inc.In Stock: 812S-1002CA24I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1009C24I-M5T1U

ABLIC Inc.In Stock: 845S-1009C24I-M5T1U Datasheet

Parametric EquivalentRFQ

S-80824CLMC-B6JT2U

ABLIC Inc.In Stock: 1196S-80824CLMC-B6JT2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XC6118C24AMR-G is determined by strict equivalence across the following critical parameters:

Mandatory Equivalence Criteria:

• Voltage threshold: 2.4V
• Output type: Push-Pull, Totem Pole
• Reset polarity: Active Low
• Operating temperature range: -40°C ~ 85°C (TA)
• Mounting type: Surface Mount
• Package classification: SC-74A, SOT-753
• Number of monitored voltages: 1 channel
• Compliance: ROHS3 Compliant, REACH Unaffected

All identified substitute parts meet these electrical and mechanical requirements. Packaging format variations (Tape & Reel vs. Cut Tape) do not affect functional equivalence and represent logistics-level differences only.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full functional and electrical equivalence to the XC6118C24AMR-G. Selection between the main part and substitutes should be based on the following factors:

Compliance & Certification: All parts carry identical RoHS3 compliance, REACH unaffected status, and MSL 1 rating. No compliance-based restrictions apply to any substitution.

Product Status: All parts maintain active product status, ensuring continued availability and manufacturer support.

Packaging Considerations: The XC6118C24AMR-G and S-80824CLMC-B6JT2U are supplied in Tape & Reel format, while S-1002CA24I-M5T1U and S-1009C24I-M5T1U are supplied in Cut Tape format. Packaging format selection depends on assembly line requirements and volume specifications.

Supplier Device Package: The main part uses SOT-25-5 designation, while all ABLIC substitutes use SOT-23-5 designation. Both designations reference the same physical SC-74A, SOT-753 package footprint and are mechanically and electrically interchangeable.

Inventory Availability: S-80824CLMC-B6JT2U offers the highest current stock level (1181 Pcs), followed by S-1009C24I-M5T1U (763 Pcs), S-1002CA24I-M5T1U (726 Pcs), and XC6118C24AMR-G (725 Pcs).

Frequently Asked Questions (FAQ)

Q: Can S-1002CA24I-M5T1U, S-1009C24I-M5T1U, and S-80824CLMC-B6JT2U be used interchangeably with XC6118C24AMR-G?

A: Yes. All parts are functionally equivalent voltage detectors with identical 2.4V threshold, push-pull totem pole output, active low reset, and operating temperature range. They share the same physical package footprint (SC-74A, SOT-753) and are pin-compatible for direct substitution.

Q: What is the difference between SOT-25-5 and SOT-23-5 designations?

A: SOT-25-5 and SOT-23-5 are supplier-specific package designations that both reference the same standardized SC-74A, SOT-753 physical package. The designations differ by manufacturer convention but represent identical mechanical and electrical specifications. No design changes are required for substitution.

Q: Does packaging format (Tape & Reel vs. Cut Tape) affect electrical performance?

A: No. Packaging format is a logistics and assembly consideration only. Tape & Reel and Cut Tape formats contain identical components with no electrical or functional differences. Selection depends on assembly equipment compatibility and volume requirements.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The XC6118C24AMR-G and all listed substitutes are ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating and REACH unaffected status.

Q: Can I substitute based on manufacturer preference?

A: Substitution is determined by electrical and mechanical parameter equivalence, not manufacturer preference. All listed parts meet identical functional specifications and are suitable for direct replacement.

Q: What parameters must remain constant for valid substitution?

A: The following parameters must match: voltage threshold (2.4V), output type (push-pull totem pole), reset polarity (active low), operating temperature range (-40°C ~ 85°C), number of monitored channels (1), and physical package (SC-74A, SOT-753). All listed substitutes maintain these specifications.