XC6118C22AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C22AMR-G is a voltage supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This single-channel supervisor operates as a voltage detector with push-pull, totem pole output configuration and active low reset functionality. The device is designed for surface mount applications in the SC-74A (SOT-753) package format and is currently in active product status with full RoHS3 compliance. Equivalent substitute parts are necessary to address supply chain flexibility, inventory availability, and design optimization across manufacturing batches while maintaining identical electrical and mechanical performance parameters.

Substiute Parts

XC6118C22AMR-G

Torex Semiconductor LtdIn Stock: 1284XC6118C22AMR-G Datasheet

Current PartRFQ

S-1000C22-M5T1U

ABLIC Inc.In Stock: 1069S-1000C22-M5T1U Datasheet

Parametric EquivalentRFQ

S-1002CA22I-M5T1U

ABLIC Inc.In Stock: 974S-1002CA22I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6118C22AMR-G are qualified based on strict electrical and mechanical parameter equivalence. The substitution criteria are defined by the following parameters:

Critical Equivalence Parameters:

• Voltage Threshold: 2.2V (exact match required)
• Number of Voltages Monitored: 1 channel
• Output Configuration: Push-Pull, Totem Pole
• Reset Function: Active Low
• Operating Temperature Range: -40°C ~ 85°C (TA)
• Package / Case: SC-74A, SOT-753
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)

The substitute parts S-1000C22-M5T1U and S-1002CA22I-M5T1U, both manufactured by ABLIC Inc., meet all critical electrical parameters and mechanical specifications. Both devices are voltage detectors with identical threshold voltage, output topology, reset polarity, and temperature operating range. The primary distinction is packaging format: the main part is supplied in Tape & Reel (TR) format, while substitutes are available in Cut Tape (CT) format. Both packaging formats are compatible with standard surface mount assembly processes.

Parameter Comparison

Engineering Selection Recommendations

All three parts—XC6118C22AMR-G, S-1000C22-M5T1U, and S-1002CA22I-M5T1U—are active products with full regulatory compliance. Selection between these parts is based on the following engineering criteria:

Supply Chain and Inventory Considerations: The XC6118C22AMR-G (Torex) has 1215 units in stock. The S-1000C22-M5T1U (ABLIC) has 1025 units available, and the S-1002CA22I-M5T1U (ABLIC) has 958 units in stock. All three parts maintain active product status, ensuring long-term availability and support.

Packaging Format Compatibility: The XC6118C22AMR-G is supplied in Tape & Reel (TR) format, suitable for high-volume automated assembly operations. The substitute parts S-1000C22-M5T1U and S-1002CA22I-M5T1U are supplied in Cut Tape (CT) format, appropriate for lower-volume production runs or manual assembly processes. Both packaging formats are compatible with standard surface mount assembly equipment.

Regulatory and Compliance Status: All three parts are RoHS3 compliant, REACH unaffected, and classified under ECCN EAR99 with HTSUS code 8542.39.0001. Moisture sensitivity level is identical across all parts at MSL 1 (Unlimited), indicating no special storage or handling requirements.

Electrical and Mechanical Equivalence: The parts are functionally equivalent across all critical parameters: 2.2V threshold voltage, single-channel monitoring, push-pull totem pole output, active low reset, and -40°C to 85°C operating temperature range. The SC-74A (SOT-753) package footprint is identical, ensuring direct PCB compatibility.

Frequently Asked Questions (FAQ)

Q: Can S-1000C22-M5T1U or S-1002CA22I-M5T1U be used as direct replacements for XC6118C22AMR-G on existing PCBs?

A: Yes. All three parts share identical package footprints (SC-74A, SOT-753) and electrical specifications. Direct PCB substitution is supported without layout modifications.

Q: What is the difference between SOT-25-5 and SOT-23-5 package designations?

A: Both designations refer to the same physical package form factor (SC-74A, SOT-753) with 5 leads. The different naming conventions reflect manufacturer-specific package nomenclature but result in identical pin configurations and footprints.

Q: Are there any temperature or environmental performance differences between the Torex and ABLIC parts?

A: No. All three parts operate across the identical temperature range of -40°C to 85°C (TA) and share the same moisture sensitivity level (MSL 1, Unlimited). Environmental performance is equivalent.

Q: What is the significance of the packaging format difference (Tape & Reel vs. Cut Tape)?

A: Tape & Reel (TR) format is optimized for high-volume automated pick-and-place assembly. Cut Tape (CT) format is suitable for lower-volume production or manual assembly processes. Both formats are compatible with standard surface mount assembly equipment. Selection depends on production volume and assembly methodology.

Q: Do all three parts meet the same regulatory compliance standards?

A: Yes. All parts are RoHS3 compliant, REACH unaffected, and carry identical ECCN (EAR99) and HTSUS (8542.39.0001) classifications. Regulatory compliance is equivalent across all three options.

Q: Is there a performance difference in the push-pull, totem pole output between these parts?

A: No. All three parts implement identical push-pull, totem pole output topology with active low reset functionality. Output electrical characteristics are equivalent.

Q: Can these parts be mixed in the same production batch?

A: Yes. Since all parts meet identical electrical and mechanical specifications, they can be used interchangeably within the same design. However, assembly process parameters (such as reflow profiles) should be verified with each manufacturer's datasheet to ensure optimal soldering results.