XC6118C20AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C20AMR-G is a voltage detector supervisor IC manufactured by Torex Semiconductor Ltd, classified as a Power Management (PMIC) component. This single-channel supervisor operates with a 2V threshold voltage and provides push-pull, totem pole output with active low reset functionality. The device is packaged in SOT-25-5 (SC-74A, SOT-753) surface mount configuration and is suitable for applications requiring voltage monitoring and system reset control.

The XC6118C20AMR-G maintains Active product status with ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Equivalent substitute parts are necessary when the primary part experiences supply constraints, extended lead times, or when design flexibility permits component sourcing from alternative manufacturers while maintaining functional and electrical compatibility.

Substiute Parts

XC6118C20AMR-G

Torex Semiconductor LtdIn Stock: 30717XC6118C20AMR-G Datasheet

Current PartRFQ

S-1000C20-M5T1U

ABLIC Inc.In Stock: 1082S-1000C20-M5T1U Datasheet

Parametric EquivalentRFQ

S-1002CA20I-M5T1U

ABLIC Inc.In Stock: 1029S-1002CA20I-M5T1U Datasheet

Parametric EquivalentRFQ

S-80820CLMC-B6FT2U

ABLIC Inc.In Stock: 3790S-80820CLMC-B6FT2U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the XC6118C20AMR-G is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Type: Voltage Detector
• Number of Voltages Monitored: 1 channel
• Voltage - Threshold: 2V
• Output Configuration: Push-Pull, Totem Pole
• Reset Function: Active Low
• Operating Temperature Range: -40°C ~ 85°C (TA)
• Mounting Type: Surface Mount
• Package / Case: SC-74A, SOT-753
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected

Allowable Variations:

• Manufacturer: Different manufacturers permitted
• Supplier Device Package: SOT-25-5 or SOT-23-5 (both SC-74A, SOT-753 case variants)
• Packaging Format: Tape & Reel (TR) or Cut Tape (CT)
• Inventory availability: No restriction

All three substitute parts (S-1000C20-M5T1U, S-1002CA20I-M5T1U, S-80820CLMC-B6FT2U) meet these criteria and are manufactured by ABLIC Inc., maintaining full functional and electrical compatibility with the primary XC6118C20AMR-G device.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are functionally equivalent to the XC6118C20AMR-G and are suitable for direct replacement in applications requiring a single-channel voltage detector with 2V threshold, push-pull totem pole output, and active low reset functionality.

Selection Criteria Based on Provided Parameters:

1. S-1000C20-M5T1U (ABLIC Inc.): Maintains identical electrical specifications and Tape & Reel packaging format. Suitable for high-volume production environments requiring standard reel quantities.

2. S-1002CA20I-M5T1U (ABLIC Inc.): Provides equivalent electrical performance with Cut Tape packaging format. Appropriate for applications requiring smaller order quantities or custom tape configurations.

3. S-80820CLMC-B6FT2U (ABLIC Inc.): Delivers full functional equivalence with Tape & Reel packaging. Highest current inventory availability (3732 Pcs) among substitute options.

All substitute parts maintain:

• Active product status with ongoing manufacturer support
• ROHS3 compliance for environmental regulatory requirements
• REACH Unaffected status for chemical substance regulations
• Unlimited moisture sensitivity rating (MSL 1) for storage and handling flexibility
• Identical operating temperature range (-40°C ~ 85°C)
• Surface mount configuration compatible with standard PCB assembly processes

Selection between substitutes should be based on packaging format requirements (Tape & Reel versus Cut Tape), inventory availability, and supply chain lead time considerations.

Frequently Asked Questions (FAQ)

Q1: Can S-1000C20-M5T1U, S-1002CA20I-M5T1U, or S-80820CLMC-B6FT2U be used as direct replacements for XC6118C20AMR-G?

A: Yes. All three ABLIC parts are parametric equivalents meeting the mandatory electrical and functional specifications: single-channel voltage detection at 2V threshold, push-pull totem pole output, active low reset, and identical operating temperature range. The SC-74A, SOT-753 package footprint is identical across all parts, enabling direct PCB-level substitution.

Q2: What is the difference between SOT-25-5 and SOT-23-5 package designations?

A: Both designations refer to the same physical package form factor (SC-74A, SOT-753) with five leads. The nomenclature variation reflects different manufacturer naming conventions for the identical package geometry. Pin count, spacing, and PCB footprint requirements are identical, permitting interchangeable use in circuit designs.

Q3: Does packaging format (Tape & Reel versus Cut Tape) affect electrical performance or compatibility?

A: No. Packaging format (Tape & Reel or Cut Tape) affects only supply chain logistics, order quantities, and handling procedures. Electrical specifications, functional performance, and PCB-level compatibility remain unchanged. S-1002CA20I-M5T1U (Cut Tape) provides identical electrical equivalence to Tape & Reel variants.

Q4: Are all substitute parts subject to the same regulatory compliance requirements?

A: Yes. All substitute parts maintain ROHS3 compliance, REACH Unaffected status, and identical moisture sensitivity rating (MSL 1). Regulatory and environmental compliance profiles are equivalent across the primary part and all substitutes.

Q5: What inventory considerations should guide part selection?

A: Current inventory levels are: XC6118C20AMR-G (30707 Pcs), S-80820CLMC-B6FT2U (3732 Pcs), S-1000C20-M5T1U (1031 Pcs), and S-1002CA20I-M5T1U (961 Pcs). Selection should account for project volume requirements, lead time constraints, and supply chain availability. Higher inventory levels may reduce procurement delays for time-sensitive applications.

Q6: Can these parts be intermixed within a single production run?

A: Yes. All parts are functionally and electrically equivalent with identical package footprints. Mixed sourcing from multiple manufacturers is permissible when supply constraints necessitate component substitution during production.