XC6118C15AMR-G Equivalent & Substitute Parts

Part Overview

The XC6118C15AMR-G is an active low voltage detector supervisor integrated circuit manufactured by Torex Semiconductor Ltd. This single-channel power management IC operates as a push-pull, totem pole output device with a 1.5V threshold voltage monitoring capability. The device is housed in a SOT-25-5 package and is classified as a voltage detector within the Power Management (PMIC) category. The XC6118C15AMR-G maintains active product status with 792 units currently in stock. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity for applications requiring identical electrical and mechanical specifications.

Substiute Parts

XC6118C15AMR-G

Torex Semiconductor LtdIn Stock: 854XC6118C15AMR-G Datasheet

Current PartRFQ

XC6118C15BMR-G

Torex Semiconductor LtdIn Stock: 968XC6118C15BMR-G Datasheet

Parametric EquivalentRFQ

S-1002CA15I-M5T1U

ABLIC Inc.In Stock: 6151S-1002CA15I-M5T1U Datasheet

Parametric EquivalentRFQ

S-1004CA15I-M5T1U

ABLIC Inc.In Stock: 1051S-1004CA15I-M5T1U Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the XC6118C15AMR-G are identified based on strict electrical and mechanical parameter equivalence. The substitution criteria are defined by the following parameters:

Critical Substitution Parameters:

• Voltage Threshold: 1.5V
• Number of Voltages Monitored: 1
• Output Configuration: Push-Pull, Totem Pole
• Reset Type: Active Low
• Operating Temperature Range: -40°C ~ 85°C (TA)
• Mounting Type: Surface Mount
• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

All identified substitute parts maintain identical electrical specifications across these parameters. Package variations (SOT-25-5 versus SOT-23-5) and packaging formats (Tape & Reel versus Cut Tape) are noted but do not affect functional equivalence. Substitute parts are sourced from both Torex Semiconductor Ltd and ABLIC Inc., both manufacturers of equivalent voltage detector supervisors.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain full electrical and mechanical equivalence to the XC6118C15AMR-G. Selection among equivalent parts is determined by the following factors:

Torex Semiconductor Ltd Substitutes:

• XC6118C15BMR-G: Direct equivalent from the same manufacturer. Identical electrical specifications and SOT-25-5 package configuration. Supplied in Tape & Reel format with 894 units in stock.

ABLIC Inc. Substitutes:

• S-1002CA15I-M5T1U: Equivalent voltage detector with identical electrical parameters. Supplied in SOT-23-5 package configuration in Tape & Reel format. Higher inventory availability at 6123 units.
• S-1004CA15I-M5T1U: Equivalent voltage detector with identical electrical parameters. Supplied in SOT-23-5 package configuration in Cut Tape format. Inventory of 942 units.

All substitute parts maintain ROHS3 compliance, REACH unaffected status, and MSL 1 rating. Product status is active for all alternatives. Selection between SOT-25-5 and SOT-23-5 package variants depends on printed circuit board layout requirements and footprint compatibility. Packaging format selection (Tape & Reel versus Cut Tape) depends on assembly process requirements and order quantity specifications.

Frequently Asked Questions (FAQ)

Q: Can S-1002CA15I-M5T1U and S-1004CA15I-M5T1U be used interchangeably with XC6118C15AMR-G?

A: Yes. Both ABLIC parts are parametric equivalents with identical voltage threshold (1.5V), output configuration (push-pull, totem pole), reset type (active low), and operating temperature range (-40°C ~ 85°C). The primary difference is package format: S-1002CA15I-M5T1U is supplied in Tape & Reel, while S-1004CA15I-M5T1U is supplied in Cut Tape. Both use SOT-23-5 package configuration versus the SOT-25-5 of the XC6118C15AMR-G.

Q: What is the difference between SOT-25-5 and SOT-23-5 packages?

A: SOT-25-5 and SOT-23-5 are both five-pin surface mount packages with identical pin configurations and electrical functionality. The primary difference is physical footprint size. PCB layout compatibility must be verified before substitution. Pin-to-pin electrical characteristics remain identical across both package types for these voltage detector devices.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. XC6118C15BMR-G, S-1002CA15I-M5T1U, and S-1004CA15I-M5T1U are all ROHS3 compliant. All parts maintain MSL 1 (Unlimited) moisture sensitivity level and REACH unaffected status.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, suitable for automated assembly processes. Cut Tape supplies components on cut sections of carrier tape, suitable for manual assembly or smaller batch quantities. Electrical and functional specifications remain identical regardless of packaging format.

Q: Can XC6118C15BMR-G replace XC6118C15AMR-G directly?

A: Yes. XC6118C15BMR-G is a direct parametric equivalent from Torex Semiconductor Ltd with identical electrical specifications, package configuration (SOT-25-5), and Tape & Reel format. No design modifications are required.

Q: Which substitute part has the highest inventory availability?

A: S-1002CA15I-M5T1U from ABLIC Inc. has the highest inventory at 6123 units in stock, supplied in Tape & Reel format with SOT-23-5 package configuration.

Q: Are all parts suitable for the operating temperature range of -40°C to 85°C?

A: Yes. All substitute parts, including XC6118C15AMR-G, XC6118C15BMR-G, S-1002CA15I-M5T1U, and S-1004CA15I-M5T1U, are rated for operating temperatures from -40°C to 85°C (TA).